Thanks. It seems to be moving quite freely but I will try some cleaning
and lube first before I start moving bits around.
--FT
On 10/1/19 4:10 PM, G Mann via Mercedes wrote:
First, lube the latch and all moving parts.. then open and close the door
several times. Might just be sticky.
Then, take a sharp lead pencil and draw a line along the back of the frame
latch, to make a reference line for how much you adjust it. [if you still
need adjustment].. then, adjust as necessary from the line you just made.
Worst case, you can always go back to the line and start over.
On Tue, Oct 1, 2019 at 12:56 PM Buggered Benzmail via Mercedes <
mercedes@okiebenz.com> wrote:
The driver door latch on this 99 $600E320 is not grabbing when door is
closed. If I push the outside just a bit right at the latch it will catch.
The mechanism moves freely so that works ok. Which part do I need to
adjust, very very slightly, the latch in the door or the catch on the
frame?
--FT
Sent from iPhone
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
--
--FT
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
