Go to the hardware store and buy a cheap scraper or putty knife and take
a dremel grinder/cutting wheel or file to it to make it fit right. Or
an old kitchen knife with the tip broken off and edge filed down so you
don't cut yourself. It only needs to be about a half inch wide with the
slot in the middle.
--R
andrew strasfogel wrote:
Euan,
Got a link to a website where I can purchase such a tool, preferably in
assorted sizes?
On 5/23/06, Euan <[EMAIL PROTECTED]> wrote:
... is a snake-eye drive. Well, here in NZ, that's what the engineering
catalogues call them - the two-pronged driver bits to un/do slot-headed
nuts.
Euan
CHCH
NZ
1985 300TD 5-spd manual
201K mi
_______________________________________
http://www.striplin.net
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To Unsubscribe or change delivery options go to:
http://striplin.net/mailman/listinfo/mercedes_striplin.net
_______________________________________
http://www.striplin.net
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To Unsubscribe or change delivery options go to:
http://striplin.net/mailman/listinfo/mercedes_striplin.net
