That's good to hear! Max Dillon Charleston SC
Aug 21, 2021 12:32:56 PM Kaleb Striplin via Mercedes <mercedes@okiebenz.com>: > I bought a left hand drill bit from HF to try to remove this broken off IP > adjuster bolt on the 606. Still no parts have arrived yet to finish the job. > I took a punch to mark a hole in the center of the bolt. Then used a center > drill bit from HF to drill a small start of a whole. Then switched to the > left handed drill bit and it turned the broken bolt right out. Whole > operation took less than 5 minutes. Now if the parts would arrive today I > will have this project done. I could put it back together as is but since > it’s apart I really need to replace the ip I ring, vacuum pump gasket, and > valve cover gasket. I think I am also going to replace the delivery valve > seals. > > Sent from my iPhone > > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
