Sweet. Keep us posted on the results. I’m really interested in how much fluid you get out with this method.
-D On Nov 9, 2021, at 1:19 PM, Buggered Benzmail via Mercedes <mercedes@okiebenz.com<mailto:mercedes@okiebenz.com>> wrote: When a kit costs $120 you can make your own for 79cents (I didn’t have a PVC cap around so hit the Ace up the road and overpaid but I guess it won’t brake the bank). Air gun can seal in the hole with a bit of tape, should be good. Will report later after the epoxy sets up. FYI I cut off the neck of the old filter, 1/2” PVC pipe fit right in there so I goobered on some epoxy to seal it all up good. It will fit in the filter hole on the valve body and if that vid was a good indicator I should be able to blow out the torque converter and the cooler without opening lines or the TC drain plug. <image0.jpeg> --FT Sent from iFōn _______________________________________ http://www.okiebenz.com<http://www.okiebenz.com/> To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com