Excellent work!
Kevin in Lexington, NC

Sent from my iPhone

> On Mar 14, 2023, at 9:03 PM, dan penoff.com via Mercedes 
> <mercedes@okiebenz.com> wrote:
> 
> Again, work got in my way of any really significant progress, although I was 
> able t put two coats of the ceramic coating on the car. Steam cleaned the 
> trunk liners and carpet, so that’s done and back in the car. Steam cleaned 
> the carpets on the driver’s side both front and back as well as cleaned out 
> all the nooks and crannies on either side of the seat.
> 
> The big surprise, and there are always big surprises when you get a new (to 
> you) car, was the trunk license plate panel.
> 
> As most of you know, the panel where the license plate is mounted is 
> different for NA cars than the RoW, since our license plates are smaller and 
> a different size. I had noticed this panel was a bit loose, which I 
> attributed to a missing screw, one of two that hold the panel in place. Or so 
> I thought. Turns out there are eight M3 studs with nuts that hold the whole 
> panel on, being bolted through the trunk lid. Not that it matters, but on the 
> W215 chassis the trunk and front fenders are fiberglass to save on weight.
> 
> So I popped the trunk lid liner so I could get at the nuts on the studs that 
> hold the panel on. The studs are clipped to the panel through a subframe or 
> bracket that was, at one time, glued to the back of the license plate panel.
> 
> I pulled everything out and laid it out on the bench. I had all the broken 
> pieces and fasteners, so I mixed up a batch of JB Weld and went at it.
> 
> The mounting frame is now setting up with the JB Weld to be reinstalled to 
> the trunk lid tomorrow. While It’s out I’ll be cleaning the area on the trunk 
> lid it covers. May never be off the car again, but at least I know it will be 
> clean.
> 
> I’m hoping to get the car in the air tomorrow so I can inspect the 
> undercarriage and get the belly pans reinstalled. I ordered a right rear ABS 
> sensor from FCP Euro early this morning and it’s already shipped, should be 
> here on Friday or Saturday. Hoping once that’s installed the funky instrument 
> cluster nannies will go away.
> 
> -D
> _______________________________________
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to