Kevin - If the NAPA store doesn't have it you can go to McMaster-Carr. www.mcmastercarr.com and search for "91732A824" includes the tap, 5 inserts and the installation tool. For an insert that size you could easily break off the installation tang with some needle nose pliers or an appropriately sized punch if you are careful $45.20 for the kit.
and if you need the 12.5mm tap drill for the insert search for "2958A169" $8.35 each. You are also going to need a 1/2" drill motor to turn this drill (.492") Barry > > Well the tap didn't work. I thought it might but the bolt won't take the > 82 ft-lbs that's required. So now I need to find a helicoil kit. Pepboyz > didn't have anything larger than 11mm. Anyone know for sure if one of the > major chains carries M12 x 1.5 kits? I'll be calling around at lunch > trying to hunt one down I guess. Hopefully, this is the last hurdle to > getting this project car on the road. > > ...Kevin
