Hi Howard,
How are things in old blighty? Perhaps it is a matter of pulling it out and
giving the contacts a clean.
Might be a fairly big job to get at it, unless you can get at it from the
top. If you do pull it out let us know how you did it, currently we have two
201's in the fleet and chances are sooner or later they will develop wonky
switch syndrome as well.
Hendrik
who suffers from wonky brain syndrome and a cold at the
moment..........cough cough
----- Original Message -----
From: "Howard Fulford" <[EMAIL PROTECTED]>
To: <mercedes@okiebenz.com>
Sent: Friday, September 29, 2006 7:33 AM
Subject: [MBZ] No Fan in position I
Listers
I just noticed that the ventilation fan on my (non-AC) 190E doesn't work
when the slider switch is in speed I - speeds II, III and MAX work fine,
so
I assuming it's not a fuse problem
I remember that my old W126's had wire wound resistors behind one of the
headlamps to give different fan speeds - I don't see anything like that on
my W210 - how's the system work here ?
It's a linear slide switch, not a rotary one
I've looked in the archives with no luck - anyone have any ideas before I
delve in ?
Howard Fulford
Bath
England
190E '89 2.0 litre, 148345 miles
_______________________________________
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.407 / Virus Database: 268.12.9/458 - Release Date: 27/09/2006
