No Prob I needed a 3/4 breaker bar to bust loose the one 240D subframe
mount. I had a 6' cheater on it with the 1/2 " breaker bar from crapsman,
but I didn't bear down on it. I was afraid i'd break the crapsman bar and
need to buy a new one, since their "warranty" is crap.
With the 3/4 bar, it was all i could do to break it loose. Probably
somewhere in the 750 ft-lb range. The threads in the body were free, but
the alum. block in the mount had corroded to the bolt. THe other mount
came off just fine with the rattle-rench.
At 11:36 PM 12/13/2006, you wrote:
> Jim, Now I am really serious about renting your socket. Let me know
> if you
> might consider a rental.
It's 3/4" drive, that going to be a problem?
-- Jim
_______________________________________
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Loren Faeth
