How low? Is it above 1 BAR? If so then it is not low. Another cause for low oil pressure is using a Fram oil filter. Fram uses 2 paper elements instead of a paper on the top section & a mat element on the bottom section. The lower mat element is the bypass filter & with an incorrectly manufactured filter, too much oil will pass through the bypass, dropping your oil pressure.
Thanks, Tom Hargrave www.kegkits.com 256-656-1924 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Werner Fehlauer Sent: Tuesday, December 26, 2006 9:17 AM To: Mercedes Discussion List Subject: [MBZ] Low oil pressure? Low oil pressure after it gets up to operating temps? #1 cause is bad main bearings; or perhaps a bad pressure regulating valve on the oil pump output combined with a worn out oil pump combined with the wrong oil viscosity. If he's really lucky, just the wrong oil! Werner ----- Original Message ----- From: "Bill Gallagher" <[EMAIL PROTECTED]> To: "Mercedes Discussion List" <mercedes@okiebenz.com> Sent: Monday, December 25, 2006 11:15 PM Subject: [MBZ] Marine Diesel - Westerbeke > Owner said low oil pressure after twenty minutes of operation .... > engine 1978 never rebuild > What are the possible causes of low oil pressure AFTER 20 minutes > operation ..... TIA > > Bill > 1981 300 TD > > > _______________________________________ > http://www.okiebenz.com > For new parts see official list sponsor: http://www.buymbparts.com/ > For used parts email [EMAIL PROTECTED] > > To Unsubscribe or change delivery options go to: > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com