On the A pillar there are 2 star screws which seem to hold a black plastic inner piece. I'm wondering how the chrome part comes off - there is a split in the chrome( aluminium ) towards the C pillar. Peter
-----Original Message----- From: Chuck Landenberger [mailto:[EMAIL PROTECTED] Sent: 09 February 2007 01:17 AM To: Mercedes Discussion List Cc: Peter Merle Subject: Re: [MBZ] Gutter moulding removal Peter, I once had a 300D and never tried to remove the gutter moulding... But, on my (former) 300SD, there were small Phillips screws that held the moulding on and were located in the top "jamb" of the door opening. The moulding was made up of two pieces meeting at the "B" pillar w/ a male/female connection. Back when I had that car repainted, I removed almost all chrome trip before it went to the paint shop. On the "A" Pillar moulding trim, are there any screws visible? I've looked at a bunch of ads on eBay for 300D's and couldn't see anything clear enough. HTH, Take care, Chuck Phoenix AZ On Feb 8, 2007, at 1:52 AM, Peter Merle wrote: > How does the chrome gutter moulding come off on the W123's? I need to > take it off due to the rust raising its ugly head there! Peter > > _______________________________________ > http://www.okiebenz.com > For new parts see official list sponsor: http://www.buymbparts.com/ > For used parts email [EMAIL PROTECTED] > > To Unsubscribe or change delivery options go to: > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com