Deoxit is what unfroze my antenna. MMMMM, good stuff that Deoxit :D Luther
On Sun, 08 Apr 2007 19:24:01 -0500, OK Don <[EMAIL PROTECTED]> wrote: > Sounds similar to what mine was doing - I put lots of Deoxit in the > switches and then sucked out and replaced the solder on all the switch > connector pins. It works fine now. > > On 4/8/07, Kaleb C. Striplin <[EMAIL PROTECTED]> wrote: >> OK, I need to research but need a quick answer. What all is involved in >> the later ACC like found on the SDL? I know on the older models you >> have the PBU, the blower control, and the temperature control(under the >> dash behind glove box). What all is there to the later version? I have >> swapped out the PBU several different times and what i have is the >> blower does not want to come on for a while when first started(even in >> AC mode), and you have to have the temp way down almost to min to avoid >> heat. Sometimes it will be cooling then all the sudden switch to heat >> for a minute (heat out the AC vents) then back to normal. Have checked >> the aspirator motor, its fine. Have swapped the temp sensor in the >> headliner. Same problem. IS there some other control box I should try >> swapping out? >> -- >> Kaleb C. Striplin/Claremore, OK >> 92 300E 4Matic, (2x) 91 300D 2.5 Turbo, 90 420SEL, >> 89 560SEL, 89 260E, 87 300SDL, 85 380SE 5.0 Euro, 84 190D 2.2, >> 81 240D, 80 240D, 76 240D, 76 300D, 72 250C, 69 250 >> http://www.okiebenz.com > > -- Luther KB5QHU Alma, Ark '87 300SDL (272,xxx mi) head case '83 300SD (245 kmi) for sale '82 300CD (166 kmi) '82 300D (74 kmi) getting donor engine-sold '85 300D (280,176) parts car sans engine