Nope.  Just Harley-Davidson, Apple and a fund that
leverages offshore compamies that deal with Cuba (the
symbol is CUBA.)

MacPoos




--- Luther <[EMAIL PROTECTED]> wrote:

> Do you own stock in 3M?  :)
> 
> Luther
> 
> On Wed, 04 Jul 2007 16:00:34 -0500, LWB250
> <[EMAIL PROTECTED]> wrote:
> 
> > Yup.  The 114/115 trunk seals are definitely glued
> in
> > place.  Here's how you replace them:
> >
> > 1.) Get some 3M™ General Purpose Adhesive
> Cleaner,
> > #08984, from your local auto parts supplier or
> body
> > shop supplier.  You might find this at a NAPA
> store,
> > too.  This stuff kicks some serious ass when it
> comes
> > to removing just about anything sticky from
> automotive
> > finishes.  It's a great wax stripper, too.
> >
> > 2.) Using a piece of wood like a popsicle stick or
> > something similar, scrape out as much of the old
> > gasket as you can.  You'll find that it will come
> out
> > pretty easily, with a little bit of remnant left
> where
> > the old glue is.
> >
> > 3.) Take the 3M Adhesive Cleaner and soak the
> > remaining pieces of seal.  After they have soaked
> for
> > a while, use your piece of wood to scrape the
> remains
> > off the finish.
> >
> > 4.) Once the groove is completely clean of old
> seal,
> > clean it with a rag saoked with the adhesive
> remover
> > to assure there are no remains.  Let it dry
> > completely.
> >
> > 5.) Using 3M Weatherstrip Adhesive (I prefer the
> black
> > stuff to the yellow stuff), put a light coat in
> the
> > seal groove.  I believe this is like contact
> cement if
> > my memory serves me correct, so you'll probably be
> > putting a light coat on the back of the seal as
> well.
> >
> > 6.) When the cement has become tacky, position the
> > seal over the groove with a helper and drop it in
> > place - don't press down!  Position it where you
> want
> > it, then go around and press firmly to set up the
> > cement.
> >
> > Done!
> >
> > Dan
> >
> 
> 
> 
> -- 
> Luther   KB5QHU    Alma, Ark
> '87 300SDL (272,xxx mi) head case
> '85 Ford F250 6.9 diesel (x58,xxx mi) BioBeast
> '82 300CD (166 kmi)
> '82 300D  (74 kmi) getting donor engine-sold
> '85 300D (280,176) parts car sans engine
> 
> _______________________________________
> http://www.okiebenz.com
> For new parts see official list sponsor:
> http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
> 
> To Unsubscribe or change delivery options go to:
>
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 



       
____________________________________________________________________________________
Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for 
today's economy) at Yahoo! Games.
http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow  

_______________________________________
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to