Unless the sun rose in the west today, I doubt Herr Doktor mess up his math.
Bob R. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marshall Booth Sent: Saturday, August 11, 2007 7:54 AM To: Mercedes Discussion List Subject: Re: [MBZ] 300D Transmission Service Question LWB250 wrote:. > > 8.) Put the pan in place, and snug the bolts up all > the way around. Tighten the bolts to spec, which is > really, really, low, something like 14 in-lbs (yes, > inch-pounds!) Not quite! The torque value for the pan bolts is 5.18 lb-ft (that's 62 lb-inch unless I've messed up my math). Marshall -- Marshall Booth Ph.D. Ass't Prof. (ret.) Univ of Pittsburgh School of Medicine [EMAIL PROTECTED] _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com