yes, that is where its located but it doesnt have a foam tube. There will be an aspirator motor behind the glove box, make sure its running. As a test, you should be able to put a little piece of tissue against the sensor intake and it should hold there
--- Kaleb C. Striplin Cox Auto Trader 730 PP Supervisor ----- Original Message ----- From: "John Robbins" <[EMAIL PROTECTED]> To: "Mercedes Discussion List" <mercedes@okiebenz.com> Sent: Monday, August 13, 2007 8:26 AM Subject: [MBZ] Where is the ACC temp sensor? W124 > I've been noticing a little bit of oddities with how my ACC is working > in the 92 300D 2.5T, but it was never enough of a problem to worry > about. Now that I'm on travel and am driving other people around the > ACC has decided it only likes to operate in full heat or full cold (it > will work inbetween for a little bit before it swings to the other > side). It seems to me that my temperature sensor just isn't sensing the > in-car temperature right, but since I'm traveling I don't have my W124 > CD... so where is the sensor? I think it is in the overhead light, but > I'm not for sure. Is this as simple as replacing a foam hose like on > the older cars or is there something else? > > > Thanks!! > John > > > _______________________________________ > http://www.okiebenz.com > For new parts see official list sponsor: http://www.buymbparts.com/ > For used parts email [EMAIL PROTECTED] > > To Unsubscribe or change delivery options go to: > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
