I glued my replacement hood pad on with Gorilla Glue. Still holding great almost 4 years later.
Peter Frederick <[EMAIL PROTECTED]> writes: > Make sure you use the high temp stuff, not the regular! I think the > high temp is product 8090, not all stores have it. > > If you use the regular adhesive, it will fall off in a couple months. > You should be able to get almost two pads glued in with one can, a > light mist completely covering the metal and the pad are quite enough > -- I did mine in three passes, very light coats. You will not see it > on the pad, it's open cell foam and the adhesive will vanish. Just > spray enough that it will stick to your hand. Allow to dry for a > minute or two, until it's quite tacky, and stick on. Pre-position the > pad and hold top or bottom in place while doing the other half works > best. > > Peter -- 1983 300D 1966 230 _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com