It sure fixed the shakes Gump was having.  Sitting at idle waiting  
for the light to turn green subjected passengers to rigorous  
imitations of bowls of jello.  Once the new mounts were in, she  
calmed down so that engine motion was once more a purr

clay

On 18 Sep 2007, at 01:18, Scott Ritchey wrote:

> I replaced my motor shocks and was surprised how little difference  
> it made.
> This is not the fix for a shakey motor.
>
> Scott Ritchey
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:mercedes- 
> [EMAIL PROTECTED]
> On Behalf Of Barry Stark
> Sent: Tuesday, September 18, 2007 4:14 AM
> To: Mercedes Discussion List
> Subject: Re: [MBZ]Fw:ReplacingInjectors(was Re:1985300SD
> NastyEngineVibration)
>
> George -
> The only thing the engine mount shocks do is to minimize the  
> shaking when
> the engine is shut down. You might want to test them first before  
> you buy
> new ones as they rarely go bad, OTOH you can replace the mounting  
> kits for
> the shocks when you replace the engine mounts.
>
> Barry
>
>>
>> The front mounts are questionable and the engine shocks don't
>> look happy. I
>> will order new ones tomorrow.
>>
>
>
>
> _______________________________________
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
> _______________________________________
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


_______________________________________
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to