Hi Jim, My guess is that you used either '--master=mesos://master@ip:port' or '--master=master@ip:port'. You should just use '--master=ip:port'. I've updated the github wiki. Sorry for any inconvenience.
Ben. On Tue, Jun 5, 2012 at 3:39 PM, Jim Donahue <[email protected]> wrote: > I've been trying to build an EC2 instance that has Mesos installed (along > with some other software). I started with the "standard" Amazon Linux > instance (64-bit) and went through the installation process described here: > https://github.com/mesos/mesos/wiki/. > > When I tried creating a Mesos cluster as described in the Wiki page, I > have no trouble creating the master. However, when I attempt to create the > slave as described, I get the following: > > I0605 22:36:28.665403 4030 logging.cpp:72] Logging to <stderr> > I0605 22:36:28.667832 4030 main.cpp:111] Creating "process" isolation > module > I0605 22:36:28.667968 4030 main.cpp:119] Build: 2012-06-05 21:46:57 by > ec2-user > > I0605 22:36:28.667987 4030 main.cpp:120] Starting Mesos slave > I0605 22:36:28.668843 4045 slave.cpp:191] Slave started on > 10.77.101.242:42842 > I0605 22:36:28.668869 4045 slave.cpp:192] Slave resources: cpus=2; > mem=6449 > F0605 22:36:28.670444 4030 main.cpp:132] Check failed: detector.isSome() > Failed > to create a master detector: Cannot parse '@0.0.0.0:0' > *** Check failure stack trace: *** > @ 0x7fdba0302ded google::LogMessage::Fail() > @ 0x7fdba03064a7 google::LogMessage::SendToLog() > @ 0x7fdba0305a26 google::LogMessage::Flush() > @ 0x7fdba03068fd google::LogMessageFatal::~LogMessageFatal() > @ 0x408150 main > @ 0x7fdb9ef30cdd __libc_start_main > @ 0x406229 (unknown) > ./mesos-slave.sh: line 24: 4030 Aborted > /tmp/mesos-0.9.0/build/ > src/mesos-slave "${@}" > > It appears the slave starts OK, but something fails right after that ... > > Thanks, > > Jim Donahue > Adobe >
