From: Zhenhua Luo <[email protected]> * add e6500 events file * update Makefile, .h, .c files to support e6500 build
Signed-off-by: Zhenhua Luo <[email protected]> --- .../oprofile-0.9.6-add-e6500-support.patch | 336 ++++++++++++++++++++ 1 file changed, 336 insertions(+) create mode 100644 recipes-kernel/oprofile/oprofile/oprofile-0.9.6-add-e6500-support.patch diff --git a/recipes-kernel/oprofile/oprofile/oprofile-0.9.6-add-e6500-support.patch b/recipes-kernel/oprofile/oprofile/oprofile-0.9.6-add-e6500-support.patch new file mode 100644 index 0000000..5d5300d --- /dev/null +++ b/recipes-kernel/oprofile/oprofile/oprofile-0.9.6-add-e6500-support.patch @@ -0,0 +1,336 @@ +Upstream-Status: Pending + +Add e6500 support in oprofile + +Signed-off-by: Zhenhua Luo <[email protected]> +diff -urN oprofile-0.9.6-old/events/Makefile.am oprofile-0.9.6/events/Makefile.am +--- oprofile-0.9.6-old/events/Makefile.am 2012-12-02 20:42:30.968089423 -0600 ++++ oprofile-0.9.6/events/Makefile.am 2012-12-02 21:11:31.993137111 -0600 +@@ -56,6 +56,7 @@ + ppc/7450/events ppc/7450/unit_masks \ + ppc/e500/events ppc/e500/unit_masks \ + ppc/e500mc/events ppc/e500mc/unit_masks \ ++ ppc/e6500/events ppc/e6500/unit_masks \ + ppc/e500v2/events ppc/e500v2/unit_masks \ + ppc/e300/events ppc/e300/unit_masks + +diff -urN oprofile-0.9.6-old/events/Makefile.in oprofile-0.9.6/events/Makefile.in +--- oprofile-0.9.6-old/events/Makefile.in 2012-12-02 20:42:30.977085519 -0600 ++++ oprofile-0.9.6/events/Makefile.in 2012-12-02 21:12:49.450053796 -0600 +@@ -259,6 +259,7 @@ + ppc/7450/events ppc/7450/unit_masks \ + ppc/e500/events ppc/e500/unit_masks \ + ppc/e500mc/events ppc/e500mc/unit_masks \ ++ ppc/e6500/events ppc/e6500/unit_masks \ + ppc/e500v2/events ppc/e500v2/unit_masks \ + ppc/e300/events ppc/e300/unit_masks + +@@ -313,7 +314,7 @@ + + + distdir: $(DISTFILES) +- $(mkdir_p) $(distdir)/alpha/ev4 $(distdir)/alpha/ev5 $(distdir)/alpha/ev6 $(distdir)/alpha/ev67 $(distdir)/alpha/pca56 $(distdir)/arm/armv6 $(distdir)/arm/armv7 $(distdir)/arm/mpcore $(distdir)/arm/xscale1 $(distdir)/arm/xscale2 $(distdir)/avr32 $(distdir)/i386/arch_perfmon $(distdir)/i386/athlon $(distdir)/i386/atom $(distdir)/i386/core $(distdir)/i386/core_2 $(distdir)/i386/core_i7 $(distdir)/i386/nehalem $(distdir)/i386/p4 $(distdir)/i386/p4-ht $(distdir)/i386/p6_mobile $(distdir)/i386/pii $(distdir)/i386/piii $(distdir)/i386/ppro $(distdir)/ia64/ia64 $(distdir)/ia64/itanium $(distdir)/ia64/itanium2 $(distdir)/mips/20K $(distdir)/mips/24K $(distdir)/mips/25K $(distdir)/mips/34K $(distdir)/mips/5K $(distdir)/mips/r10000 $(distdir)/mips/r12000 $(distdir)/mips/rm7000 $(distdir)/mips/rm9000 $(distdir)/mips/sb1 $(distdir)/mips/vr5432 $(distdir)/mips/vr5500 $(distdir)/ppc/7450 $(distdir)/ppc/e300 $(distdir)/ppc/e500 $(distdir)/ppc/e500mc $(distdir)/ppc/e500v2 $(distdir)/ppc64/970 $(distdir)/ppc64/970MP $(distdir)/ppc64/cell-be $(distdir)/ppc64/ibm-compat-v1 $(distdir)/ppc64/pa6t $(distdir)/ppc64/power4 $(distdir)/ppc64/power5 $(distdir)/ppc64/power5+ $(distdir)/ppc64/power5++ $(distdir)/ppc64/power6 $(distdir)/ppc64/power7 $(distdir)/rtc $(distdir)/x86-64/family10 $(distdir)/x86-64/family11h $(distdir)/x86-64/hammer ++ $(mkdir_p) $(distdir)/alpha/ev4 $(distdir)/alpha/ev5 $(distdir)/alpha/ev6 $(distdir)/alpha/ev67 $(distdir)/alpha/pca56 $(distdir)/arm/armv6 $(distdir)/arm/armv7 $(distdir)/arm/mpcore $(distdir)/arm/xscale1 $(distdir)/arm/xscale2 $(distdir)/avr32 $(distdir)/i386/arch_perfmon $(distdir)/i386/athlon $(distdir)/i386/atom $(distdir)/i386/core $(distdir)/i386/core_2 $(distdir)/i386/core_i7 $(distdir)/i386/nehalem $(distdir)/i386/p4 $(distdir)/i386/p4-ht $(distdir)/i386/p6_mobile $(distdir)/i386/pii $(distdir)/i386/piii $(distdir)/i386/ppro $(distdir)/ia64/ia64 $(distdir)/ia64/itanium $(distdir)/ia64/itanium2 $(distdir)/mips/20K $(distdir)/mips/24K $(distdir)/mips/25K $(distdir)/mips/34K $(distdir)/mips/5K $(distdir)/mips/r10000 $(distdir)/mips/r12000 $(distdir)/mips/rm7000 $(distdir)/mips/rm9000 $(distdir)/mips/sb1 $(distdir)/mips/vr5432 $(distdir)/mips/vr5500 $(distdir)/ppc/7450 $(distdir)/ppc/e300 $(distdir)/ppc/e500 $(distdir)/ppc/e500mc $(distdir)/ppc/e6500 $(distdir)/ppc/e500v2 $(distdir)/ppc64/970 $(distdir)/ppc64/970MP $(distdir)/ppc64/cell-be $(distdir)/ppc64/ibm-compat-v1 $(distdir)/ppc64/pa6t $(distdir)/ppc64/power4 $(distdir)/ppc64/power5 $(distdir)/ppc64/power5+ $(distdir)/ppc64/power5++ $(distdir)/ppc64/power6 $(distdir)/ppc64/power7 $(distdir)/rtc $(distdir)/x86-64/family10 $(distdir)/x86-64/family11h $(distdir)/x86-64/hammer + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ +diff -urN oprofile-0.9.6-old/events/ppc/e6500/events oprofile-0.9.6/events/ppc/e6500/events +--- oprofile-0.9.6-old/events/ppc/e6500/events 1969-12-31 18:00:00.000000000 -0600 ++++ oprofile-0.9.6/events/ppc/e6500/events 2012-12-03 01:26:19.587012221 -0600 +@@ -0,0 +1,266 @@ ++# e6500 Events ++# ++# Copyright (C) 2012 Freescale Semiconductor, Inc. ++# ++event:0x1 counters:0,1,2,3,4,5 um:zero minimum:100 name:CPU_CLK : Cycles ++event:0x2 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_INSNS : Completed Instructions (0, 1, or 2 per cycle) ++event:0x3 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_OPS : Completed Micro-ops ++event:0x5 counters:0,1,2,3,4,5 um:zero minimum:500 name:DECODED_OPS : Micro-ops decoded ++event:0x6 counters:0,1,2,3,4,5 um:zero minimum:500 name:TRANSITIONS_PM_EVENT : 0 to 1 transitions on the pm_event input ++event:0x7 counters:0,1,2,3,4,5 um:zero minimum:500 name:CPU_CLK_PM_EVENT : Processor cycles that occur when the pm_event input is asserted ++event:0x8 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_BRANCHES : Branch Instructions completed ++event:0x9 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_LOAD_OPS : Load micro-ops completed ++event:0xa counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_STORE_OPS : Store micro-ops completed ++event:0xb counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETION_REDIRECTS : Number of completion buffer redirects ++event:0xc counters:0,1,2,3,4,5 um:zero minimum:500 name:BRANCHES_FINISHED : Branches finished ++event:0xd counters:0,1,2,3,4,5 um:zero minimum:500 name:TAKEN_BRANCHES_FINISHED : Taken branches finished ++event:0xe counters:0,1,2,3,4,5 um:zero minimum:500 name:TAKEN_BRANCHES_FINISHED_NOT_BTB : Finished unconditional branches that miss the BTB ++event:0xf counters:0,1,2,3,4,5 um:zero minimum:500 name:BRANCHES_MISPREDICTED : Branch instructions mispredicted due to direction, target, or IAB prediction ++event:0x10 counters:0,1,2,3,4,5 um:zero minimum:500 name:BRANCHES_MISPREDICTED_DIRECTION : Branches mispredicted due to direction prediction ++event:0x11 counters:0,1,2,3,4,5 um:zero minimum:500 name:BTB_HITS : Branches that hit in the BTB, or missed but are not taken ++event:0x12 counters:0,1,2,3,4,5 um:zero minimum:500 name:DECODE_STALLED : Cycles the instruction buffer was not empty, but 0 instructions decoded ++event:0x13 counters:0,1,2,3,4,5 um:zero minimum:500 name:ISSUE_STALLED : Cycles the SFX/CFX issue queue is not empty but 0 instructions issued ++event:0x14 counters:0,1,2,3,4,5 um:zero minimum:500 name:BRANCH_ISSUE_STALLED : Cycles the branch buffer is not empty but 0 instructions issued ++event:0x15 counters:0,1,2,3,4,5 um:zero minimum:500 name:SFX0_SCHEDULE_STALLED : Cycles SFX0 is not empty but 0 instructions scheduled ++event:0x16 counters:0,1,2,3,4,5 um:zero minimum:500 name:SFX1_SCHEDULE_STALLED : Cycles SFX1 is not empty but 0 instructions scheduled ++event:0x17 counters:0,1,2,3,4,5 um:zero minimum:500 name:CFX_SCHEDULE_STALLED : Cycles CFX is not empty but 0 instructions scheduled ++event:0x18 counters:0,1,2,3,4,5 um:zero minimum:500 name:LSU_SCHEDULE_STALLED : Cycles LSU is not empty but 0 instructions scheduled ++event:0x19 counters:0,1,2,3,4,5 um:zero minimum:500 name:BU_SCHEDULE_STALLED : Cycles BU is not empty but 0 instructions scheduled ++event:0x1a counters:0,1,2,3,4,5 um:zero minimum:500 name:TOTAL_TRANSLATED : Total LSU micro-ops that reach the second stage of the LSU ++event:0x1b counters:0,1,2,3,4,5 um:zero minimum:500 name:LOADS_TRANSLATED : Cacheable load micro-ops translated.1 (Does not include WT) ++event:0x1c counters:0,1,2,3,4,5 um:zero minimum:500 name:STORES_TRANSLATED : Cacheable store micro-ops translated.1 (Does not include WT) ++event:0x1d counters:0,1,2,3,4,5 um:zero minimum:500 name:TOUCHES_TRANSLATED : Cacheable touch instructions translated. Includes: dcbt / dcbtep dcbtst / dcbtstep icbt ct=2 ++event:0x1e counters:0,1,2,3,4,5 um:zero minimum:500 name:CACHEOPS_TRANSLATED : Number of dcba, dcbf, dcbst, and dcbz instructions translated (e500 traps on dcbi) ++event:0x1f counters:0,1,2,3,4,5 um:zero minimum:500 name:CACHEINHIBITED_ACCESSES_TRANSLATED : Number of cache inhibited accesses translated ++event:0x20 counters:0,1,2,3,4,5 um:zero minimum:500 name:GUARDED_LOADS_TRANSLATED : Number of guarded loads translated ++event:0x21 counters:0,1,2,3,4,5 um:zero minimum:500 name:WRITETHROUGH_STORES_TRANSLATED : Number of write-through stores translated ++event:0x22 counters:0,1,2,3,4,5 um:zero minimum:500 name:MISALIGNED_ACCESSES_TRANSLATED : Number of misaligned load or store accesses translated. ++event:0x23 counters:0,1,2,3,4,5 um:zero minimum:500 name:FETCH_2X4_HITS : Each fetch retrieves up to 8 instructions, but only the first 4 are required. This event increments if at least one instruction of the second 4 are actually used. ++event:0x24 counters:0,1,2,3,4,5 um:zero minimum:500 name:FETCH_HITS_ON_PREFETCHES : Fetch hits on instruction prefetch when the data is still in the ILFB. ++event:0x25 counters:0,1,2,3,4,5 um:zero minimum:500 name:GENERATED_FETCH_PREFETCHES : Number of prefetches generated. ++event:0x29 counters:0,1,2,3,4,5 um:zero minimum:500 name:DL1_RELOADS : This is historically used to determine dcache miss rate (along with loads/stores completed). This counts dL1 reloads for any reason. ++event:0x2c counters:0,1,2,3,4,5 um:zero minimum:500 name:LOAD_MISS_WITH_LOAD_QUEUE_FULL : Counts number of stalls; Com:52 counts cycles stalled. Includes: cacheable loads, CI loads, loadec, larx, touches, ibll, ibsl,ibllsl ++event:0x2d counters:0,1,2,3,4,5 um:zero minimum:500 name:LOAD_GUARDED_MISS_NOT_LAST_REPLAYS : Load guarded miss when the load is not yet at the bottom of the completion buffer. ++event:0x2e counters:0,1,2,3,4,5 um:zero minimum:500 name:STORE_TRANSLATED_QUEUE_FULL_REPLAYS : Translate a store when the StQ is full. ++event:0x2f counters:0,1,2,3,4,5 um:zero minimum:500 name:ADDRESS_COLLISION_REPLAYS : Address collision. ++event:0x30 counters:0,1,2,3,4,5 um:zero minimum:500 name:DTLB_MISS_REPLAYS : Counts number of stalls; Com:56 counts cycles stalled. ++event:0x31 counters:0,1,2,3,4,5 um:zero minimum:500 name:DTLB_BUSY_REPLAYS : Counts number of stalls; Com:57 counts cycles stalled. ++event:0x32 counters:0,1,2,3,4,5 um:zero minimum:500 name:SECOND_PART_MISALIGNED_AFTER_MISS_REPLAYS : Second part of misaligned access when first part missed in cache. ++event:0x34 counters:0,1,2,3,4,5 um:zero minimum:500 name:LOAD_MISS_QUEUE_FULL_CYCLES : Cycles stalled on replay condition - Load miss with load queue full. ++event:0x35 counters:0,1,2,3,4,5 um:zero minimum:500 name:LOAD_GUARDED_MISS_NOT_LAST_CYCLES : Cycles stalled on replay condition - Load guarded miss when the load is not yet at the bottom of the completion buffer. ++event:0x36 counters:0,1,2,3,4,5 um:zero minimum:500 name:STORE_TRANSLATED_QUEUE_FULL_CYCLES : Cycles stalled on replay condition - Translate a store when the StQ is full. ++event:0x37 counters:0,1,2,3,4,5 um:zero minimum:500 name:ADDRESS_COLLISION_CYCLES : Cycles stalled on replay condition - Address collision. ++event:0x38 counters:0,1,2,3,4,5 um:zero minimum:500 name:DTLB_MISS_CYCLES : Cycles stalled on replay condition - DTLB miss. ++event:0x39 counters:0,1,2,3,4,5 um:zero minimum:500 name:DTLB_BUSY_CYCLES : Cycles stalled on replay condition - DTLB busy. ++event:0x3a counters:0,1,2,3,4,5 um:zero minimum:500 name:SECOND_PART_MISALIGNED_AFTER_MISS_CYCLES : Cycles stalled on replay condition - Second part of misaligned access when first part missed in cache. ++event:0x3c counters:0,1,2,3,4,5 um:zero minimum:500 name:IL1_FETCH_RELOADS : This is historically used to determine icache miss rate (along with instructions completed) Reloads due to demand fetch. ++event:0x3d counters:0,1,2,3,4,5 um:zero minimum:500 name:FETCHES : Counts fetches that write at least one instruction to the Instruction Buffer. ++event:0x3e counters:0,1,2,3,4,5 um:zero minimum:500 name:IMMU_TLB4K_RELOADS : iMMU TLB4K reloads ++event:0x3f counters:0,1,2,3,4,5 um:zero minimum:500 name:IMMU_VSP_RELOADS : iMMU VSP reloads ++event:0x40 counters:0,1,2,3,4,5 um:zero minimum:500 name:DMMU_TLB4K_RELOADS : dMMU TLB4K reloads ++event:0x41 counters:0,1,2,3,4,5 um:zero minimum:500 name:DMMU_VSP_RELOADS : dMMU VSP reloads ++event:0x42 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2MMU_MISSES : Counts iTLB/dTLB error interrupt ++event:0x43 counters:0,1,2,3,4,5 um:zero minimum:500 name:TAKEN_BRANCHES : Completed branch instructions that were taken. ++event:0x44 counters:0,1,2,3,4,5 um:zero minimum:500 name:TAKEN_BLR : Completed blr instructions that were taken. ++event:0x45 counters:0,1,2,3,4,5 um:zero minimum:500 name:BTB_TARGET_MISPREDICT : Number of target mispredicts (BTB). ++event:0x46 counters:0,1,2,3,4,5 um:zero minimum:500 name:MISPREDICT_TARGET_BLR : Number of link stack mispredicts (LS). ++event:0x47 counters:0,1,2,3,4,5 um:zero minimum:500 name:TAKEN_BTB_BUT_MISS : Number of BTB misses, but taken (BTB allocates). ++event:0x52 counters:0,1,2,3,4,5 um:zero minimum:500 name:PMC0_OVERFLOW : Counts the number of times PMC0[32] transitioned from 1 to 0. ++event:0x53 counters:0,1,2,3,4,5 um:zero minimum:500 name:PMC1_OVERFLOW : Counts the number of times PMC1[32] transitioned from 1 to 0. ++event:0x54 counters:0,1,2,3,4,5 um:zero minimum:500 name:PMC2_OVERFLOW : Counts the number of times PMC2[32] transitioned from 1 to 0. ++event:0x55 counters:0,1,2,3,4,5 um:zero minimum:500 name:PMC3_OVERFLOW : Counts the number of times PMC3[32] transitioned from 1 to 0. ++event:0x56 counters:0,1,2,3,4,5 um:zero minimum:500 name:INTERRUPTS : Number of interrupts taken ++event:0x57 counters:0,1,2,3,4,5 um:zero minimum:500 name:EXTERNAL_INTERRUPTS : Number of external input interrupts taken ++event:0x58 counters:0,1,2,3,4,5 um:zero minimum:500 name:CRITICAL_INTERRUPTS : Number of critical input interrupts taken ++event:0x59 counters:0,1,2,3,4,5 um:zero minimum:500 name:SC_TRAP_INTERRUPTS : Number of system call and trap interrupts ++event:0x5a counters:0,1,2,3,4,5 um:zero minimum:500 name:TBL_BIT_TRANS_PMGC0 : Counts transitions of the TBL bit selected by PMGC0[TBSEL]. ++event:0x5b counters:0,1,2,3,4,5 um:zero minimum:500 name:PMC4_OVERFLOW : Counts the number of times PMC4[32] transitioned from 1 to 0. ++event:0x5c counters:0,1,2,3,4,5 um:zero minimum:500 name:PMC5_OVERFLOW : Counts the number of times PMC5[32] transitioned from 1 to 0. ++event:0x61 counters:0,1,2,3,4,5 um:zero minimum:500 name:L1_STASH_HIT : Stash hits in L1 Data Cache. ++event:0x63 counters:0,1,2,3,4,5 um:zero minimum:500 name:L1_STASH_REQ : Stash requests to L1 Data Cache. ++event:0x64 counters:0,1,2,3,4,5 um:zero minimum:500 name:TIMES_LSU_THREAD_PRIO_SWTICHED : Number of times the Load Store Unit thread priority switched based on resource collisions. ++event:0x65 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_THREAD_REQ_FPU_DENIED : Number of cycles both threads had Floating Point Unit requests and one was denied. ++event:0x66 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_THREAD_REQ_VPERM_DENIED : Number of cycles both threads had Altivec Permute requests and one was denied. ++event:0x67 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_THREAD_REQ_VGEN_DENIED : Number of cycles both threads had Altivec General requests and one was denied. ++event:0x68 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_THREAD_REQ_CFX_DENIED : Number of cycles both threads had Complex Fixed-Point Unit requests and one was denied. ++event:0x69 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_THREAD_REQ_FETCH_DENIED : Number of cycles both threads both threads made a Fetch request to the L1 Instruction Cache and one thread wins arbitration. ++event:0x6e counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_LSU_ISSUE_STALLED : Cycles the LSU issue queue is not empty but 0 instructions issued. ++event:0x6f counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_FPU_ISSUE_STALLED : Cycles the FPU issue queue is not empty but 0 instructions issued. ++event:0x70 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_ALTIVEC_ISSUE_STALLED : Cycles the AltiVec issue queue is not empty but 0 instructions issued. ++event:0x71 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_FPU_SCHEDULE_STALLED : Cycles FPU is not empty but 0 instructions scheduled. ++event:0x72 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VPERM_SCHEDULE_STALLED : Cycles VPERM is not empty but 0 instructions scheduled. ++event:0x73 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VGEN_SCHEDULE_STALLED : Cycles VGEN is not empty but 0 instructions scheduled. ++event:0x74 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VPU_INSTRUCTION_WAIT_FOR_OPERA : Cycles VPU instruction waits for operands. ++event:0x75 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VFPU_INSTRUCTION_WAIT_FOR_OPERA : Cycles VFPU instruction waits for operands. ++event:0x76 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VSFX_INSTRUCTION_WAIT_FOR_OPERA : Cycles VSFX instruction waits for operands ++event:0x77 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VCFX_INSTRUCTION_WAIT_FOR_OPERA : Cycles VCFX instruction waits for operands. ++event:0x7a counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_IB_EMPT : Number of cycles the Instruction Buffer is empty ++event:0x7b counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_IB_FULL : Number of cycles the Instruction Buffer is full enough such that fetch stops fetching. ++event:0x7c counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_CB_EMPT : Number of cycles the Completion Buffer is empty. ++event:0x7d counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_CB_FULL : Number of cycles the Completion Buffer is full enough such that decode stops. ++event:0x7e counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_PRESYNC_SI_IB : Number of cycles a pre-sync serialized instruction holds in the Instruction Buffer and is not decoded. ++event:0x7f counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_CLK_0_INSTRUCTIONS : Increments if 0 instructions (micro-ops) completed. ++event:0x80 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_CLK_1_INSTRUCTIONS : Increments if 1 instruction (micro-op) completed. ++event:0x80 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_CLK_2_INSTRUCTIONS : Increments if 2 instructions (micro-op) completed. ++event:0x88 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_IAC5S : Every valid IAC5 detection. ++event:0x89 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_IAC6S : Every valid IAC6 detection. ++event:0x8a counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_IAC7S : Every valid IAC7 detection. ++event:0x8b counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_IAC8S : Every valid IAC8 detection. ++event:0x8c counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_IAC1S : Every valid IAC1 detection. ++event:0x8d counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_IAC2S : Every valid IAC2 detection. ++event:0x8e counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_IAC3S : Every valid IAC3 detection. ++event:0x8f counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_IAC4S : Every valid IAC4 detection. ++event:0x90 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DAC1S : Every valid DAC1 detection. ++event:0x91 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DAC2S : Every valid DAC2 detection. ++event:0x94 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DVT0 : Detection of a write to DEVENT SPR with DVT0 set. ++event:0x95 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DVT1 : Detection of a write to DEVENT SPR with DVT1 set. ++event:0x96 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DVT2 : Detection of a write to DEVENT SPR with DVT2 set. ++event:0x97 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DVT3 : Detection of a write to DEVENT SPR with DVT3 set. ++event:0x98 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DVT4 : Detection of a write to DEVENT SPR with DVT4 set. ++event:0x99 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DVT5 : Detection of a write to DEVENT SPR with DVT5 set. ++event:0x9a counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DVT6 : Detection of a write to DEVENT SPR with DVT6 set. ++event:0x9b counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DVT7 : Detection of a write to DEVENT SPR with DVT7 set. ++event:0x9c counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_COMPLETION_STALLED : Number of completion cycles stalled due to Nexus FIFO full. ++event:0xa1 counters:0,1,2,3,4,5 um:zero minimum:500 name:FPU_FINISH : FPU finish. ++event:0xa2 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_FPU_DIV : Counts once for every cycle of divide execution. (fdivs and fdiv). ++event:0xa3 counters:0,1,2,3,4,5 um:zero minimum:500 name:FPU_DENORM_INPUT : Counts extra cycles delay due to denormalized inputs. If there is one, this is incremented 4 times, Two operands increments it 5 times. This shows the real penalty due to denorms, not just how often they occur. ++event:0xa4 counters:0,1,2,3,4,5 um:zero minimum:500 name:FPU_DENORM_OUTPUT : FPU denorm output. ++event:0xa5 counters:0,1,2,3,4,5 um:zero minimum:500 name:FPU_FPSCR_FULL_STALL : FPU FPSCR stall. ++event:0xa6 counters:0,1,2,3,4,5 um:zero minimum:500 name:FPU_PIPE_SYNC_STALL : Synchronization-op stalls: count once for each cycle that a ��break-before�� FPU is in the RS/issue stage but cannotissue. Also count once for each cycle that an FPU op is in the RS/issue stage but cannot issue due to ��break-after��: of an FPU op currently in progress. ++event:0xa7 counters:0,1,2,3,4,5 um:zero minimum:500 name:FPU_INPUT_DATA_STALL : FPU data-ready stall: cycles in which there is an op in the RS/issue stage that cannot issue because one or more of its operands is not yet available. ++event:0xa8 counters:0,1,2,3,4,5 um:zero minimum:500 name:FPU_INSTRUCTIONS_GEN_FLAG : FPU instruction sets FPSCR[FEX]. ++event:0xac counters:0,1,2,3,4,5 um:zero minimum:500 name:PW20_CNT : Number of times the core enters the PW20 power management state. ++event:0xb0 counters:0,1,2,3,4,5 um:zero minimum:500 name:DECORATED_LOADS : Number of decorated loads to cache inhibited memory performed. ++event:0xb1 counters:0,1,2,3,4,5 um:zero minimum:500 name:DECORATED_STORES : Number of decorated stores to cache inhibited memory performed. ++event:0xb3 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_INSTRUCTIONS_SUCC : Number of successful stbcx., sthcx., stwcx., or stdcx. instructions. ++event:0xb4 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_INSTRUCTIONS_UNSUCC : Number of unsuccessful stbcx., sthcx., stwcx., or stdcx. instructions. ++event:0xb5 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_LSU_MICROOPS : Completed Load Store Unit micro-ops. Every micro-op that goes down the LSU pipe. Includes: GPR loads / GPR stores, FPR loads / FPR stores, VR loads / VR stores, Cache ops. Memory barriers Other LSU ops (dsn, msgsnd, mvidsplt, mviwsplt, tlbilx, tlbivax, tlbsync) ++event:0xb6 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_GPR_LOADS : GPR load micro-ops completed. This event only counts once for misaligns. Note that lmw that causes a fault may end up double-counting micro-ops -- once for first pass, once for second pass. ++event:0xb7 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_GPR_STORES : GPR store micro-ops completed. This event only counts once for misaligns. Note that stmw that causes a fault may end up double-counting micro-ops -- once for first pass, once for second pass. ++event:0xb8 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_CACHEOPS : Cache ops completed. Includes: dcba / dcbal, dcbf / dcbfep, dcbi, dcblc / dcblq, dcbst / dcbstep, dcbt / dcbtep / dcbtls, dcbtst / dcbtstep / dcbtstls, dcbz / dcbzep / dcbzl / dcbzlep, icbi / icbiep, icblc / icblq., icbt / icbtls ++event:0xb9 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_MEM_BARRIERS : Memory barriers completed. Includes: msync (sync, lwsync, elemental barriers) mbar (eieio) miso. ++event:0xba counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_SFX_MICROOPS : SFX micro-ops completed. ++event:0xbb counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_SINCLK_SFX_MICROOPS : SFX single-cycle micro-ops completed. ++event:0xbc counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_DBLCLK_SFX_MICROOPS : SFX double-cycle micro-ops completed. ++event:0xbe counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_CFX_INSTRUCTIONS : CFX instructions completed. ++event:0xbf counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_SFX_CFX_INSTRUCTIONS : SFX or CFX instructions completed. ++event:0xc0 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_FPU_INSTRUCTIONS : FPU instructions completed. ++event:0xc1 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_FPR_MICROOPS_LOADS : FPR load micro-ops completed. ++event:0xc2 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_FPR_MICROOPS_STORES : FPR store micro-ops completed. ++event:0xc3 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_FPR_MICROOPS_LOADS_STORES : FPR load and store micro-ops completed. ++event:0xc4 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_FPR_SINPRECISE_LOADS_STORES : FPR single-precision load and store micro-ops completed. ++event:0xc5 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_FPR_DBLPRECISE_LOADS_STORES : FPR double-precision load and store micro-ops completed. ++event:0xc6 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_ALTIVEC_INSTRUCTIONS : AltiVec instructions completed. (non-LSU). ++event:0xc7 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_ALTIVEC_VSFX_INSTRUCTIONS : AltiVec VSFX instructions completed. ++event:0xc8 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_ALTIVEC_VCFX_INSTRUCTIONS : AltiVec VCFX instructions completed. ++event:0xc9 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_ALTIVEC_VPU_INSTRUCTIONS : AltiVec VPU instructions completed. ++event:0xca counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_ALTIVEC_VFPU_INSTRUCTIONS : AltiVec VFPU instructions completed. ++event:0xcb counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_VR_LOADS_MICROOPS : VR load micro-ops completed. ++event:0xcc counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_VR_STORES_MICROOPS : VR store micro-ops completed. ++event:0xcd counters:0,1,2,3,4,5 um:zero minimum:500 name:VSCR_SAT_SET : Number of times the saturate bit flips from 0 to 1. ++event:0xd2 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_SFX0_IDLE : Cycles Simple Fixed Point Unit 0 is idle. ++event:0xd3 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_SFX1_IDLE : Cycles Simple Fixed Point Unit 1 is idle. ++event:0xd4 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_CFX_IDLE : Cycles Complex Fixed Point Unit is idle. ++event:0xd5 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_LSU_IDLE : Cycles Load Store Unit is idle. ++event:0xd6 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_BU_IDLE : Cycles Branch Unit is idle. ++event:0xd7 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_FPU_IDLE : Cycles Floating Point Unit is idle. ++event:0xd8 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VPU_IDLE : Cycles AltiVec Permute Unit is idle. ++event:0xd9 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VFPU_IDLE : Cycles AltiVec Floating Point Unit is idle. ++event:0xda counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VSFX_IDLE : Cycles AltiVec Simple Fixed Point Unit is idle. ++event:0xdb counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VCFX_IDLE : Cycles AltiVec Complex Fixed Point Unit is idle. ++event:0xdd counters:0,1,2,3,4,5 um:zero minimum:500 name:L1_CACHE_MISSES : Data L1 cache misses. (Includes load, store, cache ops). ++event:0xde counters:0,1,2,3,4,5 um:zero minimum:500 name:L1_CACHE_LOAD_MISSES : Data L1 cache load misses. ++event:0xdf counters:0,1,2,3,4,5 um:zero minimum:500 name:L1_CACHE_STORE_MISSES : Data L1 cache store misses. ++event:0xe0 counters:0,1,2,3,4,5 um:zero minimum:500 name:LMQ_ALLOCATED_LOADS : Loads that allocate into Load Miss Queue. (Data L1 cache misses, but may not be to different cache lines). ++event:0xe1 counters:0,1,2,3,4,5 um:zero minimum:500 name:LOAD_THREAD_MISS_COLLISION : Number of times that this thread��s load hits a line that is valid for the other thread but not this thread. ++event:0xe2 counters:0,1,2,3,4,5 um:zero minimum:500 name:INTERTHREAD_STATUS_ARRAY_COLLISION : Number of times that two threads collide on status array access. ++event:0xe3 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_ALLOC : Number of Store Gather Buffer allocates. ++event:0xe4 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_GATHERS : Number of Store Gather Buffer gathers. ++event:0xe5 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_OVERFLOWS : Number of Store Gather Buffer overflows. (Causes SGB full condition when additional store request is made). ++event:0xe6 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_PROMOTIONS : Number of Store Gather Buffer promotions. ++event:0xe7 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_INORDER_PROMOTIONS : Number of Store Gather Buffer in-order promotions. (Also includes oldest-entry timeout condition). ++event:0xe8 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_OUTOFORDER_PROMOTIONS : Number of Store Gather Buffer out-of-order promotions. ++event:0xe9 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_HP_PROMOTIONS : Number of Store Gather Buffer high-priority promotions. (Load hits on pending store). ++event:0xea counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_MISO_PROMOTIONS : Number of Store Gather Buffer miso promotions. promotions. (Load hits on pending store). ++event:0xeb counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_WATERMARK_PROMOTIONS : Number of Store Gather Buffer watermark promotions. ++event:0xec counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_OVERFLOW_PROMOTIONS : Number of Store Gather Buffer overflow promotions. ++event:0xed counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_DLAQ_FULL : Number of cycles the DLink Age Queue is full. ++event:0xee counters:0,1,2,3,4,5 um:zero minimum:500 name:TIMES_DLAQ_FULL : Number of times the DLink Age Queue is full. ++event:0xef counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_LRSAQ_FULL : Number of cycles the Load Reservation Set Age Queue is full. ++event:0xf0 counters:0,1,2,3,4,5 um:zero minimum:500 name:TIMES_LRSAQ_FULL : Number of times the Load Reservation Set Age Queue is full. ++event:0xf1 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_FWDAQ_FULL : Number of cycles the Forward Age Queue is full. ++event:0xf2 counters:0,1,2,3,4,5 um:zero minimum:500 name:TIMES_FWDAQ_FULL : Number of times the Forward Age Queue is full. ++event:0xf3 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_FWD_STQ_COLLISION_TIMES : Number of times a Store Queue collision is forwardable. The following cases are not forwardable: store address + size does not contain the load, cache-inhibited store, denormalized, floating point store, stcx, guarded load. ++event:0xf4 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_FWD_STQ_COLLISION_TIMES_DATA_RDY : Number of times a Store Queue collision is forwardable and is ready with data to forward. ++event:0xf5 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_FWD_STQ_COLLISION_TIMES_DATA_NORDY : Number of times a Store Queue collision is forwardable but is not ready with data to forward. ++event:0xf6 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_NOFWD_STQ_COLLISION_TIMES : Number of times a Store Queue collision is not forwardable and must wait until the store leaves the Store Queue. ++event:0xf7 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_FWD_STQ_COLLISION_CLK : Number of cycles a Store Queue collision is forwardable. (Number of cycles from the detection of a forwardable Store Queue entry until the load is replayed in stg1). ++event:0xf8 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_FWD_STQ_COLLISION_CLK_DATA_RDY : Number of cycles a Store Queue collision is forwardable and is ready with data to forward. (Number of cycles from the detection of a forwardable Store Queue entry with valid data until the load is replayed in stg1). ++event:0xf9 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_FWD_STQ_COLLISION_CLK_DATA_NORDY : Number of cycles a Store Queue collision is forwardable but is not ready with data to forward. (Number of cycles from the detection of a forwardable Store Queue entry without valid data until the load is replayed in stg1). ++event:0xfa counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_NOFWD_STQ_COLLISION_CLK : Number of cycles a Store Queue collision is not forwardable and has to wait until the store leaves the Store Queue. (Number of cycles from the detection of a non-forwardable Store Queue entry until the load is replayed in stg1). ++event:0xfb counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_FALSE_EA_COLLISION : Number of times the lower 12-bits of EA matched but the upper bits did not, leading to a false load-on-store replay. Cycle penalty is 4x the number of times. ++event:0xfc counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_LSO_BUS_COLLISION : Number of LS0 result bus collisions. Cycle penalty is 3x this measurement. ++event:0xfd counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_INTERTHREAD_DBLWORKD_BANK_COLLISION : Number of inter-thread double-word bank collisions. Measures when both threads attempt to access the same double-word bank. Cycle penalty is 3x this measurement. ++event:0xfe counters:0,1,2,3,4,5 um:zero minimum:500 name:L1_CACHE_IM : Instruction L1 cache demand fetch misses. (Includes icbtls. Does not include prefetch). ++event:0x100 counters:0,1,2,3,4,5 um:zero minimum:500 name:IMMU_MISSES : Counts misses in the level 1 Instruction MMU. ++event:0x101 counters:0,1,2,3,4,5 um:zero minimum:500 name:IMMU_TLB4K_HITS : Counts hits in the level 1 Instruction MMU TLB-4K. ++event:0x102 counters:0,1,2,3,4,5 um:zero minimum:500 name:IMMU_VSP_HITS : Counts hits in the level 1 Instruction MMU VSP. ++event:0x103 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_IMMU_HW_TABLEWALK : Counts IMMU cycles spent in hardware tablewalk. This represents the cycles from the point where the L2 MMU miss occurs to when the page table walk completes with a valid translation or exception. ++event:0x104 counters:0,1,2,3,4,5 um:zero minimum:500 name:DMMU_MISSES : Counts misses in the level 1 Data MMU. (Does not count replayed operations). ++event:0x105 counters:0,1,2,3,4,5 um:zero minimum:500 name:DMMU_TLB4K_HITS : Counts hits in the level 1 Data MMU TLB-4K. (Does not count replayed operations). ++event:0x106 counters:0,1,2,3,4,5 um:zero minimum:500 name:DMMU_VSP_HITS : Counts hits in the level 1 Data MMU VSP. (Does not count replayed operations). ++event:0x107 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_DMMU_HW_TABLEWALK : Counts DMMU cycles spent in hardware tablewalk. This represents the cycles from the point where the L2 MMU miss occurs to when the page table walk completes with a valid translation or exception. ++event:0x108 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2MMU_MISSES : Counts level 2 MMU misses. (Does not count misses that occur due to dcbt / dcbtst / dcba / dcbal instructions that fail translation and are no-oped. Does not count misses in L2MMU-VSP when looking up an indirect entry). ++event:0x109 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2MMU_4K_HITS : Counts level 2 MMU hits in L2MMU-4K. ++event:0x10a counters:0,1,2,3,4,5 um:zero minimum:500 name:L2MMU_VSP_HITS : Counts level 2 MMU hits in L2MMU-VSP. (Does not count indirect lookups). ++event:0x10b counters:0,1,2,3,4,5 um:zero minimum:500 name:L2MMU_INDIRECT_MISSES : Counts level 2 MMU indirect misses. This represents indirect entry lookups that do not have a matching indirect entry. ++event:0x10c counters:0,1,2,3,4,5 um:zero minimum:500 name:L2MMU_INDIRECT_VALID_MISSES : Counts level 2 MMU indirect valid misses. This occurts when the indirect entry is valid, but the corresponding PTE[V] = 0 or the premissions in the PTE are not sufficient for the requested access. ++event:0x10d counters:0,1,2,3,4,5 um:zero minimum:500 name:LRAT_MISSES : Counts Logical to Real Address Translation misses. This includes LRAT misses from tlbwe instructions or from page table translations. ++event:0x110 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_LMQ_LOSE_DLINK_DUE_SGB : Cycles the Load Miss Queue loses DLINK arbitration due to the Store Gather Buffer. ++event:0x111 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_SGB_LOSE_DLINK_DUE_LMQ : Cycles the Store Gather Buffer loses DLINK arbitration due to the Load Miss Queue. ++event:0x112 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_THREAD_LOSE_DLINK_DUE_OTHER_THREAD : Cycles thread loses DLINK arbitration due to other thread: Cycles thread loses DLINK arbitration due to other thread. ++event:0x116 counters:0,1,2,3,4,5 um:zero minimum:500 name:DECODE_MASK_VALUE : One mask/value pair that allows instructions to be counted in Decode. ++event:0x1bb counters:0,1,2,3,4,5 um:zero minimum:500 name:SHR_L2_DLINK_REQ : Number of DLINK requests made from core to Shared L2. ++event:0x1bc counters:0,1,2,3,4,5 um:zero minimum:500 name:SHR_L2_ILINK_REQ : Number of ILINK requests made from core to Shared L2. (Includes instruction fetches and L2MMU hardware tablewalk requests). ++event:0x1bd counters:0,1,2,3,4,5 um:zero minimum:500 name:SHR_L2_RLINK_REQ : Number of RLINK requests made from Shared L2 to core. (back invalidates, stashes, barriers). ++event:0x1be counters:0,1,2,3,4,5 um:zero minimum:500 name:SHR_L2_BLINK_REQ : Number of BLINK requests made from Shared L2 to core. (back invalidates, stashes, barriers). ++event:0x1bf counters:0,1,2,3,4,5 um:zero minimum:500 name:SHR_L2_CLINK_REQ : Number of CLINK requests made from Shared L2 to core. (back invalidates, stashes, barriers). ++event:0x1c8 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_HITS : Number of L2 Cache hits. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1c9 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_MISSES : Number of L2 Cache hits. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1ca counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_DEMAND_ACCESS : Number of L2 Cache demand accesses. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1cb counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_ACCESSES : Number of L2 Cache accesses from all sources (demand, reload, snoop, etc). Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1cc counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_STORE_ALLOCATE : Number of L2 Cache store allocates. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1cd counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_INSTRUCTIONS_ACCESS : Number of L2 Cache instruction accesses. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1ce counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_DATA_ACCESS : Number of L2 Cache data accesses. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1cf counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_INSTRUCTIONS_MISSES : Number of L2 Cache instruction misses. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1d0 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_DATA_MISSES : Number of L2 Cache data misses. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1d1 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_HITS_PER_THREAD : Number of times this core/thread hits in the L2 Cache. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1d2 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_MISSES_PER_THREAD : Number of times this core/thread misses in the L2 Cache. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1d3 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_DEMAND_ACCESS_PER_THREAD : Number of times this core/thread makes a demand access to the L2 Cache. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1d4 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_STORE_ALLOC_PER_THREAD : Number of times a store from this core/thread allocates in the L2 Cache. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1d5 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_INSTRUCTIONS_ACCESS_PER_THREAD : Number of times an instruction from this core/thread accesses the L2 Cache. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1d6 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_DATA_ACCESS_PER_THREAD : Number of times a data operation from this core/thread accesses the L2 Cache. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1d7 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_INSTRUCTION_MISSES_PER_THREAD : Number of times an instruction from this core/thread misses in the L2 Cache. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1d8 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_DATA_MISSES_PER_THREAD : Number of times a data operation from this core/thread misses in the L2 Cache. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1d9 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_RELOAD_FROM_CORENET : Number of L2 Cache reloads from CoreNet. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1da counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_IN_STASH_REQ : Number of incoming L2 Cache stash requests. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1db counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_STASH_REQ_DOWNGRD_TO_SNOOPS : Number of incoming L2 Cache stash requests downgraded to snoops. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1dc counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_SNOOPS_HITS : Number of L2 Cache snoop hits. Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1dd counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_SNOOPS_MINT : Number of L2 Cache snoops causing MINT. ++event:0x1de counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_SNOOPS_SINT : Number of L2 Cache snoops causing SINT. ++event:0x1df counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_SNOOPS_PUSHES : Number of L2 Cache snoop pushes. ++event:0x1e0 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_BIB_STALL : Stall for Back Invalidate Buffer entry (cycles). Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1e2 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_RLT_STALL : Stall for Reload Table entry (cycles). Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1e4 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_RLFQ_STALL : Stall for Reload Fold Queue entry (cycles). Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1e6 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_DTQ_STALL : Stall for Data Transaction Queue entry (cycles). Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1e8 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_COB_STALL : Stall for Castout Buffer entry (cycles). Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1ea counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_WDB_STALL : Stall for Write Data Buffer entry (cycles). Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1ec counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_RLDB_STALL : Stall for Reload Data Buffer entry (cycles). Counts 0, 1, 2, 3, or 4 per cycle. ++event:0x1ee counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_SNPQ_STALL : Stall for Snoop Queue entry (cycles). ++event:0x1fa counters:0,1,2,3,4,5 um:zero minimum:500 name:BIU_MASTER_REQ : Master transaction starts. (Number of AOut sent to CoreNet). ++event:0x1fb counters:0,1,2,3,4,5 um:zero minimum:500 name:BIU_MASTER_GLOBAL_REQ : Master transaction starts that are global. (Number of AOut with M=1 sent to CoreNet). ++event:0x1fc counters:0,1,2,3,4,5 um:zero minimum:500 name:BIU_MASTER_DATA_SIDE_REQ : Master transaction starts that are global. (Number of AOut with M=1 sent to CoreNet). ++event:0x1fd counters:0,1,2,3,4,5 um:zero minimum:500 name:BIU_MASTER_INSTRUCTION_SIDE_REQ : Master instruction-side transaction starts. (Number of I-side AOut sent to CoreNet). ++event:0x1fe counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_STASH_REQ : Stash request on AIn matches stash IDs for core or L2. ++event:0x1ff counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_SNOOP_REQ : Externally generated snoop requests. (Number of AIn from CoreNet not from self). ++ +diff -urN oprofile-0.9.6-old/events/ppc/e6500/unit_masks oprofile-0.9.6/events/ppc/e6500/unit_masks +--- oprofile-0.9.6-old/events/ppc/e6500/unit_masks 1969-12-31 18:00:00.000000000 -0600 ++++ oprofile-0.9.6/events/ppc/e6500/unit_masks 2012-12-02 21:13:35.636215387 -0600 +@@ -0,0 +1,4 @@ ++# e6500 possible unit masks ++# ++name:zero type:mandatory default:0x0 ++ 0x0 No unit mask +diff -urN oprofile-0.9.6-old/libop/op_cpu_type.c oprofile-0.9.6/libop/op_cpu_type.c +--- oprofile-0.9.6-old/libop/op_cpu_type.c 2012-12-02 20:42:30.965995783 -0600 ++++ oprofile-0.9.6/libop/op_cpu_type.c 2012-12-02 21:10:46.817254506 -0600 +@@ -83,6 +83,7 @@ + { "Intel Core/i7", "i386/core_i7", CPU_CORE_I7, 4 }, + { "Intel Atom", "i386/atom", CPU_ATOM, 2 }, + { "e500mc", "ppc/e500mc", CPU_PPC_E500MC, 4 }, ++ { "e6500", "ppc/e6500", CPU_PPC_E6500, 6 }, + }; + + static size_t const nr_cpu_descrs = sizeof(cpu_descrs) / sizeof(struct cpu_descr); +diff -urN oprofile-0.9.6-old/libop/op_cpu_type.h oprofile-0.9.6/libop/op_cpu_type.h +--- oprofile-0.9.6-old/libop/op_cpu_type.h 2012-12-02 20:42:30.965995783 -0600 ++++ oprofile-0.9.6/libop/op_cpu_type.h 2012-12-02 21:09:41.425136378 -0600 +@@ -80,6 +80,7 @@ + CPU_CORE_I7, /* Intel Core i7, Nehalem */ + CPU_ATOM, /* First generation Intel Atom */ + CPU_PPC_E500MC, /**< e500mc */ ++ CPU_PPC_E6500, /**< e6500 */ + MAX_CPU_TYPE + } op_cpu; + -- 1.7.9.5
_______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
