On 06/17/2013 01:25 PM, Eric Nelson wrote:
Thanks Otavio,
On 06/17/2013 12:52 PM, Otavio Salvador wrote:
On Fri, Jun 14, 2013 at 7:43 PM, Eric Nelson
<eric.nel...@boundarydevices.com> wrote:
Than I tried to rewrite the UBoot in Nand with the wiki of linaro (
https://wiki.linaro.org/Boards/MX6QSabreLite )
Why did you do this part? Was it because of this bit in the U-Boot
README?
Otavio, does the "mx6qsabrelite" configuration place U-Boot in
unformatted space?
I'm not seeing that a boot script is created in the machine layer:
https://github.com/Freescale/meta-fsl-arm-extra/blob/master/conf/machine/imx6qsabrelite.conf
It does; I am thinking in make it (imx6qsabrelite) an alias to
nitrogen board. This way people don't get confused about missing
machine but it works as expected.
Do you have a blog post or something explaining how to put the u-boot
in the NOR?
We have lots of those, and that may be a part of the problem,
since we transitioned from the U-Boot 2009.08 to Main-line a
while back.
I'll put together another one that's a bit more definitive since
things are now pretty stable.
Silly me.
I thought this would only take a few minutes, but I did put
together a U-Boot "Getting started" guide:
http://boundarydevices.com/u-boot-on-i-mx6/
Upgrading U-Boot is normally just a matter of placing the version
of U-Boot (file name u-boot.imx) and the script 6x_upgrade
on an SD card and running the "upgradeu" command as shown here:
http://boundarydevices.com/u-boot-on-i-mx6/#upgradeu
Regards,
Eric
_______________________________________________
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale
