Le Tue, 17 Sep 2013 11:38:29 -0300, Otavio Salvador <[email protected]> a écrit :
> On Tue, Sep 17, 2013 at 11:24 AM, Alexandre Belloni > <[email protected]> wrote: > > On 17/09/2013 16:03, Otavio Salvador wrote: > >> Hello Alexandre, > >> > >> I've put current master in autobuilder and got following build failure: > >> > >> | make[1]: Entering directory > >> `/home/otavio/hacking/fsl-community-bsp/build-2013-09-17/tmp/work/cfa10036-poky-linux-gnueabi/imx-bootlets/10.12.01-r4/imx-bootlets-src-10.12.01/linux_prep' > >> | arm-poky-linux-gnueabi-gcc -c -Wall -I./include -nostdinc > >> -fno-builtin -O -DMX28 -DBOARD_CFA10036 -D__ASSEMBLY__ -o core/entry.o > >> core/entry.S > >> | arm-poky-linux-gnueabi-gcc -c -Wall -I./include -nostdinc > >> -fno-builtin -O -DMX28 -DBOARD_CFA10036 -D__ASSEMBLY__ -o > >> core/resume.o core/resume.S > >> | arm-poky-linux-gnueabi-gcc -c -Wall -I./include -nostdinc > >> -fno-builtin -O -DMX28 -DBOARD_CFA10036 > >> -DCMDLINES_FILE=\"./output-target/command_lines_stripped.txt\" > >> -D__ASSEMBLY__ -o core/cmdlines.o core/cmdlines.S > >> | arm-poky-linux-gnueabi-gcc -c -Wall -I./include -nostdinc > >> -fno-builtin -O -DMX28 -DBOARD_CFA10036 -o core/setup.o core/setup.c > >> | arm-poky-linux-gnueabi-gcc -c -Wall -I./include -nostdinc > >> -fno-builtin -O -DMX28 -DBOARD_CFA10036 -o core/keys.o core/keys.c > >> | arm-poky-linux-gnueabi-gcc -c -Wall -I./include -nostdinc > >> -fno-builtin -O -DMX28 -DBOARD_CFA10036 -o board/cfa10036.o > >> board/cfa10036.c > >> | arm-poky-linux-gnueabi-gcc -c -Wall -I./include -nostdinc > >> -fno-builtin -O -DMX28 -DBOARD_CFA10036 -o hw/lradc-buttons.o > >> hw/lradc-buttons.c > >> | arm-poky-linux-gnueabi-cpp -P -DBASE_ADDR=0x00002000 -o > >> output-target/linux_prep.ld linux_prep.ld.in > >> | arm-poky-linux-gnueabi-ld -o output-target/linux_prep ./core/entry.o > >> ./core/resume.o ./core/cmdlines.o ./core/setup.o ./core/keys.o > >> ./board/cfa10036.o ./hw/lradc-buttons.o -static -nostdlib -T > >> ./output-target/linux_prep.ld -L./ -lgcc > >> | arm-poky-linux-gnueabi-ld: cannot find -lgcc > >> | make[1]: *** [output-target/linux_prep] Error 1 > >> | make[1]: Leaving directory > >> `/home/otavio/hacking/fsl-community-bsp/build-2013-09-17/tmp/work/cfa10036-poky-linux-gnueabi/imx-bootlets/10.12.01-r4/imx-bootlets-src-10.12.01/linux_prep' > >> | make: *** [linux_prep] Error 2 > >> | ERROR: oe_runmake failed > >> | WARNING: > >> /home/otavio/hacking/fsl-community-bsp/build-2013-09-17/tmp/work/cfa10036-poky-linux-gnueabi/imx-bootlets/10.12.01-r4/temp/run.do_compile.13439:1 > >> exit 1 from > >> | exit 1 > >> | ERROR: Function failed: do_compile (log file is located at > >> /home/otavio/hacking/fsl-community-bsp/build-2013-09-17/tmp/work/cfa10036-poky-linux-gnueabi/imx-bootlets/10.12.01-r4/temp/log.do_compile.13439) > >> > >> > >> Can you take a look at this? > >> > > > > Hum, weird, I built master this morning and it worked fine. Is that the > > only board using the bootlets failing ? > > > > I seem to get the same log but it is not failing: > > > > arm-poky-linux-gnueabi-gcc -c -Wall -I./include -nostdinc -fno-builtin > > -O -DMX28 -DBOARD_CFA10036 -o hw/lradc-buttons.o hw/lradc-buttons.c > > arm-poky-linux-gnueabi-cpp -P -DBASE_ADDR=0x00002000 -o > > output-target/linux_prep.ld linux_prep.ld.in > > arm-poky-linux-gnueabi-ld -o output-target/linux_prep ./core/entry.o > > ./core/resume.o ./core/cmdlines.o ./core/setup.o ./core/keys.o > > ./board/cfa10036.o > > ./hw/lradc-buttons.o -static -nostdlib -T ./output-target/linux_prep.ld > > -L/home/alex/Projects/crystalfontz/fsl/cfa10058/tmp/sysroots/cfa10058/usr/lib/a > > rm-poky-linux-gnueabi/4.8.1/ -lgcc > > arm-poky-linux-gnueabi-objcopy -R -S -O binary output-target/linux_prep > > output-target/linux_prep.rom > > make[1]: Leaving directory > > `/home/alex/Projects/crystalfontz/fsl/cfa10058/tmp/work/cfa10058-poky-linux-gnueabi/imx-bootlets/10.12.01-r4/imx-bootlets-sr > > c-10.12.01/linux_prep' > > > > I'll try to update my tree again and see if I can reproduce. > > Yes, this is weird indeed. > > This has been done using my autobuilder and it helps to spot some > miss-use or weird things like that. > > So it uses same tmp directory for all builds and it helps to spot some > inter-machine dependencies and wrong settings. I still not clear what > might be causing this yet. > linux_prep/Makefile has : LIBGCCDIR = $(dir $(shell $(CC) -print-libgcc-file-name)) CFLAGS = -Wall -I$(INCLUDEDIR) -nostdinc -fno-builtin -O LDFLAGS = -static -nostdlib -T $(BOOT_LAYOUT_OUT) -L$(LIBGCCDIR) -lgcc I remember I had to hack this when building bootlets with some toolchains. Eric _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
