Hello Daiane, thank you for your reply. Yes, I want to use FSL plugins to benefit from the hardware acceleration (even if I have to play only mp3 files). The preferred provider for my MACHINE is "linux" as you can see below (I post my MACHINE .conf file FYR)
/*========================================================================== ======== #@TYPE: Machine #@NAME: i.MX53 Quick Start Board #@DESCRIPTION: Machine configuration for Freescale i.MX53 Quick Start Board include conf/machine/include/imx-base.inc include conf/machine/include/tune-cortexa8.inc SOC_FAMILY = "mx5:mx53" KERNEL_DEVICETREE = "${S}/arch/arm/boot/dts/imx53-qsb.dts" UBOOT_MACHINE = "mx53loco_config" MACHINE_FIRMWARE += "firmware-imx-ar3k \ firmware-imx-ath6k" MACHINE_FEATURES += " wifi bluetooth" # # Software/packages selection # PREFERRED_PROVIDER_virtual/kernel = "linux" # Extra udev rules PREFERRED_VERSION_udev = "164" PREFERRED_VERSION_udev-extraconf = "0.0" MACHINE_EXTRA_RRECOMMENDS += "udev-extraconf" /*========================================================================== ======== Including the package gst-fsl-plugins in my .bb file the error of my previous email occurs. Any suggestion? Thanks so much Simone -----Messaggio originale----- Da: Daiane Angolini [mailto:daiane.angol...@freescale.com] Inviato: venerdì 27 settembre 2013 20:04 A: Simone; meta-freescale@yoctoproject.org Cc: 'Paolo Gussago' Oggetto: Re: [meta-freescale] # IMX53 GSTREAMER PROBLEMS On 09/27/2013 02:16 PM, Simone wrote: > Dear All, > > im trying to include the gstreamer in our image for iMX53, I have > included the package gstreamer, by adding it in my .bb file with: > > IMAGE_INSTALL += gstreamer \ > > The problem is that when I try to play an audio file from my qt4 > application (using Phonon) it give me this error: > > Warning: You do not seem to have the base GStreamer plugins installed. > All audio and video support has been disabled" > Phonon::GStreamer::Backend: Failed to initialize GStreamer > > So after a search on the web, I tried to add the package > gst-fsl-plugin but bitbake fail to build , here is the last part of > the log: gstreamer is THE gstreamer, the complete media framework. gst-fsl-plugin is the package that provides the VPU accelerated plugins to work *with* gstreamer. this package is provided by FSL. gstreamer should not depend on kernel. gst-fsl-plugin depends on linux-imx (for imx53 it's 2.6.35) Could you, please, let me know your PREFERRED_PROVIDER for virtual/kernel? And could you, please, let me know if you only need gstreamer or if you want gst-fsl-plugin also? > > | > /home/cx/yocto/poky/build/tmp/sysroots/cjbc1/usr/src/kernel/include/linux/ip u.h:884:9: > note: declared here > > | mxc_ipu_hl_lib.c: In function 'mxc_ipu_lib_task_buf_update': > > | mxc_ipu_hl_lib.c:3369:39: warning: operation on > 'ipu_priv_handle->tri_output_bufnum' may be undefined [-Wsequence-point] > > | mxc_ipu_hl_lib.c:3376:34: warning: operation on > 'ipu_priv_handle->output_bufnum' may be undefined [-Wsequence-point] > > | mxc_ipu_hl_lib.c: In function 'mxc_ipu_lib_task_control': > > | mxc_ipu_hl_lib.c:3405:26: warning: variable 'ipu_priv_handle' set but > not used [-Wunused-but-set-variable] > > | make[1]: *** [mxc_ipu_hl_lib.o] Error 1 > > | make[1]: Leaving directory > `/home/cx/yocto/poky/build/tmp/work/cjbc1-poky-linux-gnueabi/imx-lib/11.09.0 1-r4.2/imx-lib-11.09.01/ipu' > > | make: *** [ipu] Error 2 > > | ERROR: oe_runmake failed > > | ERROR: Function failed: do_compile (see > /home/cx/yocto/poky/build/tmp/work/cjbc1-poky-linux-gnueabi/imx-lib/11.09.01 -r4.2/temp/log.do_compile.2758 > for further information) > > ERROR: Task 1138 > (/home/cx/yocto/poky/meta-fsl-arm/recipes-multimedia/imx-lib/imx-lib_11.09.0 1.bb, > do_compile) failed with exit code '1' > > WARNING: File '/usr/lib/lib_mp3_enc_arm11_elinux.so.2.2.0' from > fsl-mm-mp3enc-codeclib was already stripped, this will prevent future > debugging! > > WARNING: File '/usr/lib/lib_mp3_enc_arm12_elinux.so.2.2.0' from > fsl-mm-mp3enc-codeclib was already stripped, this will prevent future > debugging! > > WARNING: File '/usr/lib/lib_mp3_enc_arm9_elinux.so.2.2.0' from > fsl-mm-mp3enc-codeclib was already stripped, this will prevent future > debugging! > > NOTE: Tasks Summary: Attempted 3773 tasks of which 3760 didn't need to > be rerun and 1 failed. > > Waiting for 0 running tasks to finish: > > Maybe I am missing something? > > Thanks so much > > Simone > > > > _______________________________________________ > meta-freescale mailing list > meta-freescale@yoctoproject.org > https://lists.yoctoproject.org/listinfo/meta-freescale > -- Daiane _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-freescale