Hi, On Tue, 29 Oct 2013 13:12:21 -0200 Daiane Angolini <[email protected]> wrote:
> On 10/29/2013 01:03 PM, Jose Mª Ferreiro wrote: >> >> El 25/10/2013 9:18, Eric Bénard escribió: >>> >>> Le Fri, 25 Oct 2013 14:49:31 +0800, jojo <[email protected]> a écrit : >>>> I rebuild the imx53qsb completely and boot failed also as bellow : >>>> >>>> and i do not change anything about for yocto dora except DL_DIR to >>>> redirect to "DL_DIR = "${TOPDIR}/../../downloads"" >>>> >>>> U-Boot 2013.10-rc3 (Oct 25 2013 - 13:28:32) >>>> >>>> Board: MX53 LOCO >>>> I2C: ready >>>> DRAM: 1 GiB >>>> MMC: FSL_SDHC: 0, FSL_SDHC: 1 >>>> MMC: no card present >>>> MMC init failed >>> >>> can you try with an other SDCard it seems u-boot fails to initialize >>> this one. I'll try dora on MX53QSB asap. >> >> A similar problem here: just a week ago, we got a imx6qsabresd >> board. We compiled a image for it and burn it into a microSD (with >> adapter). u-boot does not recognize the card. We burned it into a >> normal SD card and the board started well. >> >> It seems as if u-boot does not recognize the microSD card. > > I've been using microSD for imx53qsb with u-boot mainline since 2 > years ago, and I have never faced this problem. > > Sometimes I need to hardreset (unplug power supply) because some QSB > does not have a good reset button, but microsd always worked for me I once had problems with an SD card adapter. Don't remember which board it was, but just replacing the adapter did the trick. Best wishes. Mario -- http://www.ossystems.com.br _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
