Hello Daiane,
you are my lifeline...

My kernel is the linux-fsl (linux-2.6.35.3) with some changes made for
configure the GPIOs and UARTs in our board (in mx53_loco.c)
The bootloader I'm using is U-Boot 2013.10-rc3

Really I don’t know if the L2 cache is enabled or not.
How I can check this?

Regards
Simone




-----Messaggio originale-----
Da: Daiane Angolini [mailto:[email protected]] 
Inviato: giovedì 31 ottobre 2013 15:40
A: Simone
Cc: [email protected]
Oggetto: Re: [meta-freescale] R: Imx53 sd card read write timing

On Thu, Oct 31, 2013 at 12:35 PM, Simone <[email protected]> wrote:
> Nobody can help me?
>

I don´t know your kernel. And I´m not sure which u-boot you´re using.
It may be anything!

But, the only thing that came to my mind is L2 cache enabled or not.

Do you know if you have enabled L2 cache?


Daiane

> Simone
>
>
> -----Messaggio originale-----
> Da: Simone [mailto:[email protected]]
> Inviato: mercoledì 30 ottobre 2013 20:22
> A: <[email protected]>
> Oggetto: Imx53 sd card read write timing
>
> Dear all,
> I've finished today to port our changes from the old FSL kernel we 
> used
> (2011 version, v11.05) for our board based on imx53qsb.
>
> Everything is working fine now, using the FSL kernel from Master 
> branch, except one thing.
> Compared to the previous (very old) version of the kernel, we noted 
> that the uSD card read/write timings are a lot more slower than before 
> (also the system kernel loading, seems two times than before)
>
> Now i really don't know where to point my finger first.
> Maybe something inserted in the sdhc driver? Or the journaled filesystem?
>
> Really i don't know.
>
> Does someone have faced a similar problem in the past?
>
> Thank you so much
> My best regards
> Simone
>
>
>
>
>
> _______________________________________________
> meta-freescale mailing list
> [email protected]
> https://lists.yoctoproject.org/listinfo/meta-freescale

_______________________________________________
meta-freescale mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-freescale

Reply via email to