Hello Gary, On Thu, Feb 6, 2014 at 10:29 AM, Gary Thomas <[email protected]> wrote: > I've noticed quite a lot of activity with the new kernel (3.10.17) > recently so I thought I'd give it a go. I built my normal X11 based > system for my SabreLite, overriding the kernel to be 3.10+ > > For the record, I built using these layers (plus my own local distro layer) > meta = "master:4e9eb77108c7e628ebd00ec848b8bc034802e197" > meta-fsl-arm = "master:c43d781a35f148fe5267261d7f634d51a8ad647c" > meta-fsl-arm-extra = "master:745e6b99edb94672edf0c1377a69b5fc03ab1a35" > > I was happily surprised when it came right up, found my camera (so > far not tested). Sadly, X11 didn't start with the attached log messages. > > Is this the kernel vs GPU firmware mismatch I read about last week? > What needs to be done to get this going?
In fact you must to use master-next branches as those includes the new GPU drivers. From your log, this seems to be the missing part. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
