Hi Erik,
On 05/07/2014 01:02 AM, Erik Botö wrote:
On Tue, May 6, 2014 at 8:16 PM, Eric Nelson
<[email protected]> wrote:
Hi Erik,
<snip>
I just tested against this image, revision fe41f1e of our kernel
and nitrogen6x_defconfig on a Nitrogen6x and things worked
perfectly through a handful of re-boots:
http://boundarydevices.com/yocto-kernel-3-10-17-beta/
Let me know if you'd like me to upload a binary kernel package.
Thanks for helping out!
No problem. That's what we're here for.
After testing this out and getting really confused about it still not
working I started to look through the early boot output on the serial
console looking for some board revision info. Then I noticed that it
used the sabrelite version of the device tree file since board was
unset in u-boot. By doing a "setenv board nitrogen6x" in u-boot before
booting, which makes it use the correct dtb-file, sound works like a
charm. So I guess it was a user error all along, although a
not-so-obvious one :)
After upgrading u-boot on the board from "U-Boot
2013.01-00058-g5957f6d" to "U-Boot 2014.04" the board variable is set
by default and hence everything works out-of-the-box.
Thanks for the note about this. Since upgrading U-Boot is a
separate operation for our boards, we'll likely have others
hit the same thing as they make the transition to DT.
Regards,
Eric
--
_______________________________________________
meta-freescale mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-freescale
