Hi all,
On 05/30/2014 06:54 PM, Eric Nelson wrote:
Hi Peter,
On 05/28/2014 09:09 AM, Peter Bergin wrote:
Hi Eric,
On 05/28/2014 04:03 PM, Eric Nelson wrote:
Thanks Peter,
On 05/27/2014 11:51 PM, Peter Bergin wrote:
Hi Eric,
On 05/27/2014 11:11 PM, Eric Nelson wrote:
Hi Peter,
On 05/25/2014 11:43 PM, Peter Bergin wrote:
Hi Eric,
<snip>
I haven't yet found a TO 1.0 board to test against.
After trying everything else (hard-coding your EDID, and using a DVI
cable), I managed to find a board with Silicon Revision 1.0, and
it's failing more or less as you described:
- 640x480 works
- 1920x1080p fails
I also see those "timeout waiting for flip irq" messages whenever
switching to a resolution that doesn't function.
I'm not sure why, but it's probably time to grep through those pesky
tests for tapeout:
imx_get_soc_revision() == IMX_CHIP_REVISION_1_0
TO 1.0 **did** work at 1080P in the older kernels.
Can anyone confirm 1080P HDMI support on 3.10.17 or
3.10.31 on other boards with TO 1.0?
I know it's been a long time since they stopped shipping,
but there must be some SABRE SD's or other boards around
with older silicon.
Please advise,
Eric
--
_______________________________________________
meta-freescale mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-freescale
