Update config file: * U-boot provider: u-boot-qmx6 - UBOOT_CONFIG variable defines the Congatec-QMX6 module variant to build. For testing purposes by default is set to: "pn016103" - This variable must be set in the conf/local.conf file according with the module partnumber. The possible values are:
pn016100, pn016101, pn016102, pn016103, pn016104, pn016105, pn016106, pn016110, pn016111, pn016112, pn016113 If a PN016101 is the target module, the line added to the conf/local.conf would be like the following: UBOOT_CONFIG = "pn016101" * Linux kernel provider: linux-qmx6 - Config file is the same for all the variants, due to that the SOC_FAMILY variables includes all SOCs to include the firmware of all machines. * The rootfs must be transfered to the first ext3 partiton of a micro-SD card (detailed steps are in 'qmx6_readme_yocto_1.6.txt' file in section 2. 'Transfer the root file system' It can be found in: http://www.congatec.com/products/qseven/conga-qmx6.html under the Drivers section. (Login requiered) Signed-off-by: Alex de Cabo <alejandro.de-cabo-gar...@congatec.com> --- conf/machine/cgtqmx6.conf | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) diff --git a/conf/machine/cgtqmx6.conf b/conf/machine/cgtqmx6.conf index 467379a..ea2f373 100644 --- a/conf/machine/cgtqmx6.conf +++ b/conf/machine/cgtqmx6.conf @@ -6,18 +6,34 @@ include conf/machine/include/imx-base.inc include conf/machine/include/tune-cortexa9.inc -SOC_FAMILY = "mx6:mx6q" +SOC_FAMILY = "mx6:mx6dl:mx6q" -# Use u-boot imx -UBOOT_SUFFIX = "bin" +# Use u-boot QMX6 UBOOT_PADDING = "2" -PREFERRED_PROVIDER_u-boot = "u-boot-imx" -PREFERRED_VERSION_u-boot-imx = "2009.08" +PREFERRED_PROVIDER_u-boot = "u-boot-qmx6" -PREFERRED_PROVIDER_virtual/kernel ?= "linux-congatec" +UBOOT_CONFIG ??= "pn016103" +UBOOT_CONFIG[pn016100] = "cgt_qmx6_pn016100" +UBOOT_CONFIG[pn016101] = "cgt_qmx6_pn016101" +UBOOT_CONFIG[pn016102] = "cgt_qmx6_pn016102" +UBOOT_CONFIG[pn016103] = "cgt_qmx6_pn016103" +UBOOT_CONFIG[pn016104] = "cgt_qmx6_pn016104" +UBOOT_CONFIG[pn016105] = "cgt_qmx6_pn016105" +UBOOT_CONFIG[pn016106] = "cgt_qmx6_pn016106" +UBOOT_CONFIG[pn016110] = "cgt_qmx6_pn016110" +UBOOT_CONFIG[pn016111] = "cgt_qmx6_pn016111" +UBOOT_CONFIG[pn016112] = "cgt_qmx6_pn016112" +UBOOT_CONFIG[pn016113] = "cgt_qmx6_pn016113" -UBOOT_MACHINE = "cgtqmx6_config" +UBOOT_MAKE_TARGET = "u-boot.${UBOOT_CONFIG}.imx" + +#Use linux kernel QMX6 +PREFERRED_PROVIDER_virtual/kernel = "linux-qmx6" +KERNEL_DEVICETREE = "imx6q-qmx6.dtb imx6dl-qmx6.dtb" SERIAL_CONSOLE = "115200 ttymxc1" MACHINE_FEATURES += " pci" + +#Create only tar.bz2 image +IMAGE_FSTYPES = "tar.bz2" -- 1.9.1 -- _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-freescale