On Wed, Aug 27, 2014 at 4:07 PM, Lauren Post <lauren.p...@freescale.com> wrote: > Add support for pfuze200 on imx6sl-evk
If you donĀ“t mind. I prefer if you use the machine name here. Instead of imx6sl-evk, please, use imx6slevk Daiane > > Move pmic device node from imx6sl-evk.dtsi to upper-level, and add > another layer on imx6sl-evk to diff pfuze100 or pfuze200. Meanwhile > only works in ldo-enable mode if using pfuze200, since 'SW1C' switch > regulator is cut for cost-down which means VDDARM_IN and VDDSOC_IN have > to share the same switch regulator > > Signed-off-by: Lauren Post <lauren.p...@freescale.com> > --- > conf/machine/imx6slevk.conf | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/conf/machine/imx6slevk.conf b/conf/machine/imx6slevk.conf > index cffbd0b..9dc0185 100644 > --- a/conf/machine/imx6slevk.conf > +++ b/conf/machine/imx6slevk.conf > @@ -10,6 +10,7 @@ include conf/machine/include/tune-cortexa9.inc > SOC_FAMILY = "mx6:mx6sl" > > KERNEL_DEVICETREE = "imx6sl-evk.dtb imx6sl-evk-csi.dtb imx6sl-evk-ldo.dtb" > +KERNEL_DEVICETREE += "imx6sl-evk-pf200.dtb" > > UBOOT_CONFIG ??= "sd" > UBOOT_CONFIG[sd] = "mx6slevk_config,sdcard" > -- > 1.7.9.5 > > -- > _______________________________________________ > meta-freescale mailing list > meta-freescale@yoctoproject.org > https://lists.yoctoproject.org/listinfo/meta-freescale -- _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-freescale