On Wed, Aug 27, 2014 at 4:07 PM, Lauren Post <lauren.p...@freescale.com> wrote: > Signed-off-by: Lauren Post <lauren.p...@freescale.com> > --- > conf/machine/imx6sxsabresd.conf | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > create mode 100644 conf/machine/imx6sxsabresd.conf > > diff --git a/conf/machine/imx6sxsabresd.conf b/conf/machine/imx6sxsabresd.conf > new file mode 100644 > index 0000000..070c1ef > --- /dev/null > +++ b/conf/machine/imx6sxsabresd.conf > @@ -0,0 +1,21 @@ > +#@TYPE: Machine > +#@NAME: Freescale i.MX6SoloX SabreSD > +#@SOC: i.MX6SX > +#@DESCRIPTION: Machine configuration for Freescale i.MX6SoloX Sabre SD
Maintainer? > + > +require conf/machine/include/imx6sabresd-common.inc You can use require imx6sabresd-common.inc instead here > + > +SOC_FAMILY = "mx6:mx6sx" > + > +KERNEL_DEVICETREE = "imx6sx-sdb.dtb imx6sx-sdb-emmc.dtb imx6sx-sdb-m4.dtb" > +KERNEL_DEVICETREE += "imx6sx-sdb-sai.dtb imx6sx-sdb-lcdif1.dtb > imx6sx-sdb-canfd.dtb" > + > +UBOOT_ENTRYPOINT = "0x80008000" > +PREFERRED_PROVIDER_u-boot = "u-boot-imx" >From that I assume there is no imx6sxsabresd u-boot-fslc support so far, right? > + > +UBOOT_CONFIG ??= "sd" > +UBOOT_CONFIG[sd] = "mx6sxsabresd_config,sdcard" > +UBOOT_CONFIG[emmc] = "mx6sxsabresd_emmc_config,sdcard" > +UBOOT_CONFIG[qspi2] = "mx6sxsabresd_qspi2_config" > +UBOOT_CONFIG[m4fastup] = "mx6sxsabresd_m4fastup_config" > +UBOOT_CONFIG[mfgtool] = "mx6sxsabresd_config" nice Daiane -- _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-freescale