On Wed, Feb 18, 2015 at 11:39 AM, Isaac Nickaein <[email protected]> wrote: > Hi, > > I am trying to build Kernel 3.0.35 for my iMX.6Q. I am using Ka-Ro > TX6Q (http://www.karo-electronics.com/tx6q.html) development kit which > is compatible with the SabreSD boards. > > I've downloaded the Dora branch, set it up for imx6qsabresd board and > bitbaked core-image-minimal based on this tutorial: > > https://community.freescale.com/servlet/JiveServlet/previewBody/95096-102-10-7847/yocto_tutorial.pdf > > After flashing the uImage onto the NAND, the kernel freezes at > "Disabling LCD". Here is the output on the serial console:
Do you have console enabled on your kernel command line? Why do you need to use such old branch/kernel? If this is "compatible with the SabreSD boards" I'm sure you´re going to succeed if using dizzy Daiane > > > > U-Boot 2013.07-00115-g828ccd0 (Aug 21 2013 - 11:45:45) > > CPU: Freescale i.MX6Q rev1.2 at 792 MHz > Reset cause: POR > Temperature: 48 C, calibration data 0x59c51469 > Board: Ka-Ro TX6Q-1xx0 > I2C: ready > DRAM: 1 GiB > VDDSOC set to 1420mV > VDDCORE set to 1420mV > NAND: 128 MiB > MMC: FSL_SDHC: 0, FSL_SDHC: 1 > Invalid color depth: '1120' in video_mode; using default: '24' > IPU HW Rev: 4 > CPU clock set to 792.000 MHz > Baseboard: stk5-v3 > MAC addr from fuse: 00:0c:c6:79:aa:6f > Net: FEC > Hit any key to stop autoboot: 0 > > Loading from nand0, offset 0x180000 > Image Name: Linux-3.0.35-4.1.0+yocto+gbdde70 > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 4042436 Bytes = 3.9 MiB > Load Address: 10008000 > Entry Point: 10008000 > ## Booting kernel from Legacy Image at 18000000 ... > Image Name: Linux-3.0.35-4.1.0+yocto+gbdde70 > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 4042436 Bytes = 3.9 MiB > Load Address: 10008000 > Entry Point: 10008000 > Verifying Checksum ... OK > Loading Kernel Image ... OK > > Starting kernel ... > > Disabling LCD > > > #### serial console output ends here #### > -- > _______________________________________________ > meta-freescale mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-freescale -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
