Hi Gary,
On 05/18/2015 03:04 PM, Gary Thomas wrote:
On 2015-05-18 02:18, Nikolay Dimitrov wrote:
Hi Pawel,
On 05/18/2015 08:34 AM, Paweł Żabiełowicz wrote:
Hi all,
I'm having some problems running video playback on Nitrogen6x-Lite. I'm
using fido with 3.10.53 kernel. Display is running properly as I see a
console after start, but starting any simple video with Gstreamer1.0 +
gstreamer-imx plugins does not give any video output, even though the
decoding looks like it's working.
Gstreamer log:
gst-launch-1.0 rtspsrc location=rtsp://watch:watch13579
192.168.7.24:554/profile3/media.smp ! rtph264depay ! imxvpudec !
imxipuvideosink
[INFO] Product Info: i.MX6Q/D/S
Pipeline is live and does not need PREROLL ...
Progress: (open) Opening Stream
Progress: (connect) Connecting to
rtsp://192.168.7.24:554/profile3/media.smp
Progress: (open) Retrieving server options
Progress: (open) Retrieving media info
Progress: (request) SETUP stream 0
Progress: (request) SETUP stream 1
Progress: (open) Opened Stream
Setting pipeline to PLAYING ...
New clock: GstSystemClock
Progress: (request) Sending PLAY request
Progress: (request) Sending PLAY request
Progress: (request) Sent PLAY request
^Chandling interrupt.
Interrupt: Stopping pipeline ...
Execution ended after 0:00:15.125067669
Setting pipeline to PAUSED ...
Setting pipeline to READY ...
Setting pipeline to NULL ...
Freeing pipeline ...
Plugins installed:
gst-inspect-1.0 | grep imx
imxipu: imxipuvideotransform: Freescale IPU video transform
imxipu: imxipuvideosink: Freescale IPU video sink
imxvpu: imxvpudec: Freescale VPU video decoder
imxvpu: imxvpuenc_h263: Freescale VPU h.263 video encoder
imxvpu: imxvpuenc_h264: Freescale VPU h.264 video encoder
imxvpu: imxvpuenc_mpeg4: Freescale VPU MPEG-4 video encoder
imxvpu: imxvpuenc_mjpeg: Freescale VPU motion JPEG video encoder
imxg2d: imxg2dvideosink: Freescale G2D video sink
imxg2d: imxg2dvideotransform: Freescale G2D video transform
imxaudio: imxuniaudiodec: Freescale i.MX uniaudio decoder
imxv4l2src: imxv4l2src: V4L2 CSI Video Source
imxpxp: imxpxpvideosink: Freescale PxP video sink
imxpxp: imxpxpvideotransform: Freescale PxP video transform
imxeglvivsink: imxeglvivsink: Freescale EGL video sink
While using imxeglvivsink I'm seeing red flash for few milliseconds over
the console and that's it.
Any advices will be helpful.
Please download this file and try a local file playback, to eliminate
possible networking issues:
https://download.blender.org/durian/trailer/sintel_trailer-1080p.mp4
Also, please check whether an automatically constructed pipeline is
able to play the file above:
gst-launch-1.0 playbin uri=file:///sintel_trailer-1080p.mp4
You can try same tests with Xorg running.
What would that pipeline look like (to force the result into a window
on the screen)? As is, this simple command takes over the entire screen.
The automatically generated pipeline depends entirely on the media
itself and the set of plugins you have installed - playbin/decodebin
and friends are looking at the stream properties and searching for the
plugin with the highest rank which can be plugged there. The best place
to look at is usually the media graphs (.dot files) after playbin was
able to play something (I do this regularly, as my pipelines are
usually worse than the ones created by playbin).
Also the full-screen behavior depends the videosink configuration, so
hard to give universal answer, as none will fit all cases.
Regards,
Nikolay
--
_______________________________________________
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale
