Create i.MX 7Dual SABRE Smart Device with device tree support for enet, epdc, gpmi-weim, hdmi-audio, m4, qspi and wm8960 configurations.
Create U-Boot support for sdcard, qspi, nand and mfgtool configurations. Signed-off-by: Lauren Post <lauren.p...@freescale.com> --- conf/machine/imx7dsabresd.conf | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 conf/machine/imx7dsabresd.conf diff --git a/conf/machine/imx7dsabresd.conf b/conf/machine/imx7dsabresd.conf new file mode 100644 index 0000000..1a8f27b --- /dev/null +++ b/conf/machine/imx7dsabresd.conf @@ -0,0 +1,25 @@ +#@TYPE: Machine +#@NAME: Freescale i.MX7D SABRE Smart Device +#@SOC: i.MX7D +#@DESCRIPTION: Machine configuration for Freescale i.MX7D SABRE Smart Device +#@MAINTAINER: Lauren Post <lauren.p...@freescale.com> + +require conf/machine/include/imx-base.inc +require conf/machine/include/tune-cortexa7.inc + +MACHINE_FEATURES += " pci wifi bluetooth" + +SOC_FAMILY = "mx7:mx7d" + +KERNEL_DEVICETREE = "imx7d-sdb.dtb imx7d-sdb-enet.dtb imx7d-sdb-epdc.dtb \ + imx7d-sdb-gpmi-weim.dtb imx7d-sdb-hdmi-audio.dtb imx7d-sdb-m4.dtb \ + imx7d-sdb-qspi.dtb imx7d-sdb-wm8960.dtb" + +PREFERRED_PROVIDER_u-boot = "u-boot-imx" +PREFERRED_PROVIDER_virtual/bootloader = "u-boot-imx" + +UBOOT_CONFIG ??= "sd" +UBOOT_CONFIG[sd] = "mx7dsabresd_config,sdcard" +UBOOT_CONFIG[qspi1] = "mx7dsabresd_qspi1_config" +UBOOT_CONFIG[nand] = "mx7dsabresd_nand_config,ubifs" +UBOOT_CONFIG[mfgtool] = "mx7dsabresd_config_config" -- 1.7.9.5 -- _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-freescale