Hi Otavio, On Sat, Feb 27, 2016 at 8:13 AM, Otavio Salvador <otavio.salva...@ossystems.com.br> wrote:
> http://ci.ossystems.com.br/public/fsl-community-bsp/master-next/imx6qsabresd/framebuffer/1040/images Thanks for providing the pre-built images. They are very helpful. I tried it and booted fine for the first time on my mx6qsabresd. I could reach the prompt successfully. However in the second boot it failed to found the rootfs, which seems to match what Matt reported: ALSA device list: #0: wm8962-audio #1: imx-hdmi-soc EXT3-fs (mmcblk2p2): error: couldn't mount because of unsupported optional features (2c0) EXT2-fs (mmcblk2p2): error: couldn't mount because of unsupported optional features (2c4) JBD2: recovery failed EXT4-fs (mmcblk2p2): error loading journal List of all partitions: 1f00 4096 mtdblock0 (driver?) b300 3872256 mmcblk2 driver: mmcblk b301 8192 mmcblk2p1 04277521-01 b302 761856 mmcblk2p2 04277521-02 b308 7757824 mmcblk3 driver: mmcblk b320 128 mmcblk3rpmb (driver?) b318 1024 mmcblk3boot1 (driver?) b310 1024 mmcblk3boot0 (driver?) No filesystem could mount root, tried: ext3 ext2 ext4 vfat fuseblk Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2) CPU2: stopping CPU: 2 PID: 0 Comm: swapper/2 Not tainted 3.14.61-fslc+g327d5c9 #1 [<80014f44>] (unwind_backtrace) from [<80011714>] (show_stack+0x10/0x14) [<80011714>] (show_stack) from [<806fe774>] (dump_stack+0x7c/0xbc) [<806fe774>] (dump_stack) from [<80013a44>] (handle_IPI+0x144/0x158) [<80013a44>] (handle_IPI) from [<80008598>] (gic_handle_irq+0x58/0x5c) [<80008598>] (gic_handle_irq) from [<80012280>] (__irq_svc+0x40/0x70) Exception stack(0xa80a9fa0 to 0xa80a9fe8) 9fa0: ffffffed 2ad0f000 80a31790 8001d280 a80a8000 80a30574 8070774c a80a8030 9fc0: 80a99d7d 80a99d7d a80a8000 00000000 00000000 a80a9fe8 8000f058 8000f044 9fe0: 60000113 ffffffff [<80012280>] (__irq_svc) from [<8000f044>] (arch_cpu_idle+0x2c/0x44) [<8000f044>] (arch_cpu_idle) from [<8006dc54>] (cpu_startup_entry+0x100/0x14c) [<8006dc54>] (cpu_startup_entry) from [<10008624>] (0x10008624) CPU3: stopping CPU: 3 PID: 0 Comm: swapper/3 Not tainted 3.14.61-fslc+g327d5c9 #1 [<80014f44>] (unwind_backtrace) from [<80011714>] (show_stack+0x10/0x14) [<80011714>] (show_stack) from [<806fe774>] (dump_stack+0x7c/0xbc) [<806fe774>] (dump_stack) from [<80013a44>] (handle_IPI+0x144/0x158) [<80013a44>] (handle_IPI) from [<80008598>] (gic_handle_irq+0x58/0x5c) [<80008598>] (gic_handle_irq) from [<80012280>] (__irq_svc+0x40/0x70) Exception stack(0xa80abfa0 to 0xa80abfe8) bfa0: ffffffed 2ad17000 80a31790 8001d280 a80aa000 80a30574 8070774c a80aa030 bfc0: 80a99d7d 80a99d7d a80aa000 00000000 00000000 a80abfe8 8000f058 8000f044 bfe0: 60000113 ffffffff [<80012280>] (__irq_svc) from [<8000f044>] (arch_cpu_idle+0x2c/0x44) [<8000f044>] (arch_cpu_idle) from [<8006dc54>] (cpu_startup_entry+0x100/0x14c) [<8006dc54>] (cpu_startup_entry) from [<10008624>] (0x10008624) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.61-fslc+g327d5c9 #1 [<80014f44>] (unwind_backtrace) from [<80011714>] (show_stack+0x10/0x14) [<80011714>] (show_stack) from [<806fe774>] (dump_stack+0x7c/0xbc) [<806fe774>] (dump_stack) from [<80013a44>] (handle_IPI+0x144/0x158) [<80013a44>] (handle_IPI) from [<80008598>] (gic_handle_irq+0x58/0x5c) [<80008598>] (gic_handle_irq) from [<80012280>] (__irq_svc+0x40/0x70) Exception stack(0x80a29f68 to 0x80a29fb0) 9f60: ffffffed 2acff000 80a31790 8001d280 80a28000 80a30574 9f80: 8070774c 80a28038 80a99d7d 80a99d7d 80a28000 00000000 00000000 80a29fb0 9fa0: 8000f058 8000f044 60000113 ffffffff [<80012280>] (__irq_svc) from [<8000f044>] (arch_cpu_idle+0x2c/0x44) [<8000f044>] (arch_cpu_idle) from [<8006dc54>] (cpu_startup_entry+0x100/0x14c) [<8006dc54>] (cpu_startup_entry) from [<809c4b2c>] (start_kernel+0x350/0x35c) [<809c4b2c>] (start_kernel) from [<10008074>] (0x10008074) If I insert the SD card on my host PC, I can only mount the zImage/dtb partition and the rootfs does not mount in the PC too. This is the error I got on my PC: "Unable to mount 780 MB Volume Error mounting /dev/mmcblk0p2 at /media/fabio/167af0df-63c6-426f-8461-763d24a0b678: Command-line `mount -t "ext4" -o "uhelper=udisks2,nodev,nosuid" "/dev/mmcblk0p2" "/media/fabio/167af0df-63c6-426f-8461-763d24a0b678"' exited with non-zero exit status 32: mount: wrong fs type, bad option, bad superblock on /dev/mmcblk0p2, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so" All subsequent boots failed as well. -- _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-freescale