We are still using the relative path, just add fsl/ due to the dts folder change in kernel tree.
Best Regards, Zhenhua > -----Original Message----- > From: Otavio Salvador [mailto:otavio.salva...@ossystems.com.br] > Sent: Monday, August 08, 2016 6:24 PM > To: Zhenhua Luo <zhenhua....@nxp.com> > Cc: Ting Liu <ting....@nxp.com>; meta-freescale@yoctoproject.org > Subject: Re: [meta-freescale] [meta-freescale-layer][PATCH 00/50] QorIQ > patches > > On Mon, Aug 8, 2016 at 12:15 AM, Zhenhua Luo <zhenhua....@nxp.com> > wrote: > ... > >> The path for the dtb is not the usual way of using it; it would be > >> better if the Makefile was fixed so normal usage works. > > [Luo Zhenhua] The dts path change for QorIQ PPC targets is upstreamed to > the mainline of community kernel source tree. The new path will be the > normal path for future SDKs. > > > > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/a > > rch/powerpc/boot/dts/fsl > > And it provides the glue to avoid the need of calling the dtb with the full > path, > see; > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/power > pc/boot/Makefile#n385 > > > -- > Otavio Salvador O.S. Systems > http://www.ossystems.com.br http://code.ossystems.com.br > Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 -- _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-freescale