Ah.. Sorry for the noise - worked out what I was getting wrong!
Sent: 19 October 2016 17:45 To: [email protected] Subject: [meta-freescale] Unable to use a defconfig in my own kernel recipe I'm trying to customize my kernel for use with a KaRo TX6 module. I've created my own recipe in my own layer&recipe - mylayer/recipes-kernel/linux/linux-myboard_4.4.bb, based on the existing (meta-fsl-arm-extra\recipes-kernel\linux\linux-karo_4.4bb): SUMMARY = "Linux Kernel for my board (Ka-Ro electronics TX6 Computer-On-Modules)" require recipes-kernel/linux/linux-imx.inc require recipes-kernel/linux/linux-dtb.inc DEPENDS += "lzop-native bc-native" SRCBRANCH = "karo-tx6-mainline" LOCALVERSION = "-2016-03-10" SRCREV = "03f89bc99b43fcb07414557eb94e3e10002f8ce2" KERNEL_SRC = "git://git.karo-electronics.de/karo-tx-linux.git;protocol=git" SRC_URI = "${KERNEL_SRC};branch=${SRCBRANCH} \ file://defconfig <file:///\\defconfig> \ " KERNEL_IMAGETYPE="uImage" COMPATIBLE_MACHINE = "myboard-*" I've also defined my own machine: require ${BSPDIR}/sources/meta-fsl-arm-extra/conf/machine/include/tx6-karo-common.in c SOC_FAMILY = "mx6:mx6dl:tx6" UBOOT_MACHINE = "tx6s-8035_config" PREFERRED_PROVIDER_virtual/kernel = "linux-myboard" PREFERRED_PROVIDER_u-boot = "u-boot-myboard " PREFERRED_VERSION_linux-myboard ?= "4.4%" The build *is* using my layer&recipe, but I'm struggling to get my own defconfig (which I've placed in mylayer/recipes-kernel/linux/linux-myboard_4.4/) pulled into the kernel build - it seems to still be defaulting to KaRo's own default config What's the missing steps for getting it to take my defconfig.?
-- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
