Hi! Are you using systemd? If you're using systemd check if you have CONFIG_FHANDLE=y in your defconfig, if not add this to defconfig, build kernel and try to boot again.
Fabio Berton On Mon, Sep 4, 2017 at 6:38 AM, Gao Yang <gaoyang...@gmail.com> wrote: > Hi All, > > I use imx6q sabre lite board with Yocto Morty. Every time I start my imx6 > board, it always asks me to enter login: root , so I have tried auto login > with the following way: > in my /usr/bin, I create a autologin script contains this: > #!/bin/sh > exec /bin/login -f root > > then in /etc/inittab, I have changed > #mxc1:12345:respawn:/bin/start_getty 115200 ttymxc > to follows > mxc1:12345:respawn:/bin/start_getty -l /usr/bin/autologin -n 115200 > ttymxc1 > > but when I reboot the board, it doesn't auto login, and it display: > INIT: Id "mxc1" respawning too fast: disabled for 5 minutes > > I don't know where is wrong and how I should modify this file? I attached > my inittab file, thanks in advance! > > ------------------------------------------------------------ > ------------------------------- > # /etc/inittab: init(8) configuration. > # $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $ > # The default runlevel. > id:5:initdefault: > # Boot-time system configuration/initialization script. > # This is run first except when booting in emergency (-b) mode. > si::sysinit:/etc/init.d/rcS > # What to do in single-user mode. > ~~:S:wait:/sbin/sulogin > # /etc/init.d executes the S and K scripts upon change > # of runlevel. > # > # Runlevel 0 is halt. > # Runlevel 1 is single-user. > # Runlevels 2-5 are multi-user. > # Runlevel 6 is reboot. > l0:0:wait:/etc/init.d/rc 0 > l1:1:wait:/etc/init.d/rc 1 > l2:2:wait:/etc/init.d/rc 2 > l3:3:wait:/etc/init.d/rc 3 > l4:4:wait:/etc/init.d/rc 4 > l5:5:wait:/etc/init.d/rc 5 > l6:6:wait:/etc/init.d/rc 6 > # Normally not reached, but fallthrough in case of emergency. > z6:6:respawn:/sbin/sulogin > mxc1:12345:respawn:/bin/start_getty 115200 ttymxc1 > #mxc1:12345:respawn:/bin/start_getty -l /usr/bin/autologin -n 115200 > ttymxc1 > # /sbin/getty invocations for the runlevels. > # > # The "id" field MUST be the same as the last > # characters of the device (after "tty"). > # > # Format: > # <id>:<runlevels>:<action>:<process> > # > 1:12345:respawn:/sbin/getty 38400 tty1 > > Best regards, > Yang GAO > > -- > _______________________________________________ > meta-freescale mailing list > meta-freescale@yoctoproject.org > https://lists.yoctoproject.org/listinfo/meta-freescale > >
-- _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-freescale
