Hello. I have one question regard this change.
There is another board called PICO-PI-IMX6UL and the same image from below can also be used on PICO-PI-IMX6UL, or maybe configuration change is needed? ________________________________ From: Fabio Berton <fabio.ber...@ossystems.com.br> Sent: Friday, September 15, 2017 4:40 AM To: Vanessa Maegima Cc: meta-freescale Mailing List; Takashi Matsuzawa; desrochers.phili...@gmail.com Subject: Re: [meta-freescale] [3rdparty][PATCH v2] imx7d-pico: Add machine configuration Hi Vanessa, If you intend to use only wic image you don't need to add tar.bz2 ext4 to IMAGE_FSTYPES, adding only wic.gz is enough. On Thu, Sep 14, 2017 at 3:28 PM, Vanessa Maegima <vanessa.maeg...@nxp.com<mailto:vanessa.maeg...@nxp.com>> wrote: Add machine definition for imx7d-pico board. For more information about this reference design, please visit: https://www.wandboard.org/products/android-things/PICO-PI-IMX7/ The machine configuration file used to include Yocto Project support to the board is a consolidation work only. It only reflects the work done in Linux kernel, U-Boot and FSL Community BSP, where the hard work is actually done. Signed-off-by: Vanessa Maegima <vanessa.maeg...@nxp.com<mailto:vanessa.maeg...@nxp.com>> --- Changes since v1: - Remove unnecessary overriding - Add wic support - Remove unnecessary line COMPATIBLE_MACHINE_imx7d-pico conf/machine/imx7d-pico.conf | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 conf/machine/imx7d-pico.conf diff --git a/conf/machine/imx7d-pico.conf b/conf/machine/imx7d-pico.conf new file mode 100644 index 0000000..80aea98 --- /dev/null +++ b/conf/machine/imx7d-pico.conf @@ -0,0 +1,27 @@ +#@TYPE: Machine +#@NAME: IMX7D-PICO +#@SOC: i.MX7D +#@DESCRIPTION: Machine configuration for IMX7D-PICO board. +#@MAINTAINER: Vanessa Maegima <vanessa.maeg...@nxp.com<mailto:vanessa.maeg...@nxp.com>> + +MACHINEOVERRIDES =. "use-mainline-bsp:mx7:mx7d:" + +require conf/machine/include/imx-base.inc +require conf/machine/include/tune-cortexa7.inc + +SERIAL_CONSOLE = "115200 ttymxc4" + +KERNEL_DEVICETREE = "imx7d-pico.dtb" + +UBOOT_MACHINE = "pico-imx7d_defconfig" + +MACHINE_ESSENTIAL_EXTRA_RDEPENDS += " \ + kernel-image \ + kernel-devicetree \ + u-boot-fslc \ +" + +WKS_FILES ?= "imx-uboot.wks" +WKS_FILE_DEPENDS ?= "" + +IMAGE_FSTYPES = "tar.bz2 ext4 wic.gz" -- 2.7.4 -- _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org<mailto:meta-freescale@yoctoproject.org> https://lists.yoctoproject.org/listinfo/meta-freescale
-- _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-freescale