*include the following changes: 00cde47 - driver: net: fsl-mc: remove usage of CONFIG_FSL_MC_ENET a2d3f26 - powerpc: configs: Set initrd_high environment varible cab48d3 - armv8: ls1043ardb_sdcard: delete CONFIG_SPL_FSL_LS_PPA 6f8b6dd - mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled 03560b1 - armv8: sec_firmware: Remove JR3 from device tree node in all cases 123ee86 - ls1088a: qspi: Enable XIP mode above 16 MB addresses eb3ddd0 - PowerPC: phy: enable all phylib drivers when use phylib and tsec enet 2efee07 - ls2081a: qspi: Enable config to write aligned data to TxFIFO b32402c - ls2088a: qspi: Enable config to write aligned data to TxFIFO e7f0b4a - ls2080a: qspi: Enable config to write aligned data to TxFIFO 1c693ab - ls1088a: qspi: Enable config to write aligned data to TxFIFO edcb0a5 - Kconfig: qspi: Add SPI_ALIGNED_TXFIFO config details c6a9fe0 - qspi: Add code to send only aligned data to TxFIFO 1f13780 - ls1088a: Moving CONFIG_FSL_QSPI to defconfig 4cbef43 - EHCI: Fix endian access issue on EHCI intinalization 901ad16 - ARMv8: ls1046a: Enable PCIe and E1000 in lpuart defconfig 7340b38 - armv8: ls1088: Add CONFIG_SPI_FLASH_SPANSION to sdcard defconfigs a17a22d - armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to defconfig 226adb1 - armv8: ls1088: Add qixis offsets for lbmap and rcw_src 71fed5f - fsl: common :qixis: Add ifc and emmc switch support in qixis 2705761 - board:ls1012a2g5rdb: define PFE firmware address in kconfig ec53bd9 - board: ls1012a: update mdio, phy parameters based on serdes protocol cce1563 - board: ls1012a2g5rdb: avoid phy reset 621dd47 - dm: pci: change bus number register setting compliant with Linux f5285a8 - armv8: ls1088ardb: secure boot: Use tiny printf to save spl size a6932b4 - armv8: ls1088a: vid: Add some function in SPL for VID adc2721 - ls1088a: Add VID support for QDS and RDB platforms 318f7c4 - common: board_f: vid: Add VID specific API to adjust core voltage d0d1638 - ls1088a: ddr: configure DDR for 0.9v for VID support 55540f3 - ddr: fsl: set cdr1 first in case 0.9v VDD is enabled for some SoCs 2586b3a - board: common: vid: Add support for LTC3882 voltage regulator chip dfbc0d1 - Kconfig: Add LTC3882 voltage regulator config f5f238d - board: common: vid: Move IR chip specific code in flag 094c483 - board: common: vid: Add board specific vdd adjust API 9d25d53 - board: common:vid: Add LS1088A VID Supported voltage values fe1dc63 - armv8: lsch3: Add serdes and DDR voltage setup
Signed-off-by: Chunrong Guo <chunrong....@nxp.com> --- recipes-bsp/u-boot/u-boot-qoriq_2017.12.bb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/recipes-bsp/u-boot/u-boot-qoriq_2017.12.bb b/recipes-bsp/u-boot/u-boot-qoriq_2017.12.bb index 0d75fa7..11964ba 100644 --- a/recipes-bsp/u-boot/u-boot-qoriq_2017.12.bb +++ b/recipes-bsp/u-boot/u-boot-qoriq_2017.12.bb @@ -20,7 +20,7 @@ DEPENDS_append_qoriq-ppc = " boot-format-native" SRC_URI = "git://source.codeaurora.org/external/qoriq/qoriq-components/u-boot;nobranch=1 \ " -SRCREV = "9f7df1b406ff11409021cd2112beedd6b57bb600" +SRCREV = "00cde476c84275124a51cb55a53a253cd75fba6c" S = "${WORKDIR}/git" -- 1.9.0 -- _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-freescale