When I do a : git clone git://git.yoctoproject.org/meta-intel
I do not see a meta-cedartrail package in it? What should I be cloning? Randall ________________________________________ From: [email protected] [[email protected]] on behalf of Svancara, Randall [[email protected]] Sent: Sunday, October 13, 2013 7:29 PM To: Ong, Boon Leong Cc: [email protected] Subject: Re: [meta-intel] meta-intel Digest, Vol 12, Issue 10 I grabbed wget http://downloads.yoctoproject.org/releases/yocto/yocto-1.3/machines/cedartrail/meta-cedartrail-danny-8.0.0.tar.bz2 ________________________________________ From: Ong, Boon Leong [[email protected]] Sent: Sunday, October 13, 2013 7:26 PM To: Svancara, Randall Cc: [email protected] Subject: RE: meta-intel Digest, Vol 12, Issue 10 > -----Original Message----- > From: Svancara, Randall [mailto:[email protected]] > Sent: Monday, October 14, 2013 10:08 AM > To: Ong, Boon Leong > Cc: [email protected] > Subject: RE: meta-intel Digest, Vol 12, Issue 10 > > I made an attempt at your instructions, with one modification. I did a wget > to download the cedartrail bsp layer and extracted it over the top of the > meta-intel directory. > [Ong, Boon Leong] Which package have you wget? Based on http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel/tree/common/recipes-graphics/xorg-driver?h=danny , There is only common/recipes-graphics/xorg-driver/emgd-driver-bin_1.16.bb For v1.18, it is on http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel/tree/common/recipes-graphics/xorg-driver/emgd-driver-bin_1.18.bb?h=dora It seems like that you grab the wrong meta-intel package and try to use it on danny. You need to make sure that both poky & meta-intel are having the same version. > I attempted to try a build and I ended up with this error: > > ERROR: ParseError at /data/development/poky/meta- > intel/common/recipes-graphics/xorg-driver/emgd-driver-bin_1.18.bb:37: > Could not inherit file classes/distro_features_check.bbclass > ERROR: Command execution failed: Exited with 1 > > Summary: There were 2 ERROR messages shown, returning a non-zero exit > code. > > Any ideas? > ________________________________________ > From: [email protected] [meta-intel- > [email protected]] on behalf of Svancara, Randall > [[email protected]] > Sent: Sunday, October 13, 2013 6:32 PM > To: Ong, Boon Leong > Cc: [email protected] > Subject: Re: [meta-intel] meta-intel Digest, Vol 12, Issue 10 > > Thanks for the awesome instructions. I am going to give this a try! > > Randall > ________________________________________ > From: Ong, Boon Leong [[email protected]] > Sent: Sunday, October 13, 2013 6:17 PM > To: Svancara, Randall > Cc: [email protected] > Subject: RE: meta-intel Digest, Vol 12, Issue 10 > > > Message: 1 > > Date: Sun, 13 Oct 2013 17:48:39 +0000 > > From: "Svancara, Randall" <[email protected]> > > To: "[email protected]" <[email protected]> > > Subject: [meta-intel] Yocto Intel Atom N2600/N2800/D2550 Cedartrail > > Message-ID: > > <1F880D7A2494B346B5AB96481EAE704A0EA486DB@EXMB- > > 03.ad.wsu.edu> > > Content-Type: text/plain; charset="iso-8859-1" > > > > I am trying to use Yocto to build a version of embedded Linux that can > > work on an Intel Atom D2550. > > > > I am following your instructions located here: > > > > https://www.yoctoproject.org/download/intel%C2%AE-atom%E2%84%A2- > > n2600n2800d2550-wnm10-chipset-cedar-trail-open-source-graphics > > > > I am a little vague on some of the details of the instructions and > > would appreciate any clarification that may able to provide. > > > > 1. I download the Danny version of the Yocto project here: > > http://mirrors.kernel.org/yocto/yocto/yocto-1.3/poky-danny-8.0.1.tar.b > > z2 > > > > 2. Extract the tarball into a directory called /data/YOCTO. > > > > 3. Here is where I am confused. I use git to clone the following: > > > > git clone git://git.openembedded.org/bitbake > > git clone git://git.openembedded.org/openembedded-core > > git clone git://git.yoctoproject.org/meta-intel\ > > wget http://downloads.yoctoproject.org/releases/yocto/yocto- > > 1.3.1/machines/cedartrail/meta-cedartrail-danny-8.0.1.tar.bz2 > > > > 4. I know have the following directories in /data /data/bitbake > > /data/openembedded-core /data/meta-intel /data/YOCTO > > /data/meta-cedartrail-danny-8.0.1.tar.bz2 > > > > 5. I extract the meta-cedartrail-danny-8.0.1.tar.bz2 file. I place > > the meta- cedartrail/meta-cedartrail sub directory into the /data/meta- > intel directory. > > > > At this point, I am lost as to where I need to place the bitbake and > > openembedded directories. I have tried so many variations of copying > > directories around and nothing seems to work. I always end up with > > errors in the build. I am using Ubuntu 12.04. > > > > I appreciate any assistance you may be able to provide. > [Ong, Boon Leong] > You have two options when building a BSP: > (A) download packages + build > (B) git clone + build > > (A) is a packaged release according to a stable version and (B) if you want to > pick new git commit. > > I normally do (B) as follow: > > Assuming you are at /home/user/development # cd > /home/user/development # git clone git://git.yoctoproject.org/poky.git > # cd /home/user/development/poky > # git checkout -b danny --track origin/danny # git clone > git://git.yoctoproject.org/meta-intel.git > # cd /home/user/development /poky/meta-intel # git checkout -b danny -- > track origin/danny # cd /home/user/development # mkdir build # cd > /home/user/development/build # source > /home/user/development/poky/oe-init-build-env <your-bsp-build-name> # > cd /home/user/development/build/<your-bsp-build-name> > # vi conf/bblayer.bb > > BBLAYERS ?= " \ > /home/user/development/poky/meta \ > /home/user/development/poky/meta-yocto \ > /home/user/development/poky/meta-yocto-bsp \ > /home/user/development/poky/meta-intel \ > /home/user/development/poky/meta-intel/meta-cedartrail \ > " > > # vi conf/local.bb > // uncomment the following > BB_NUMBER_THREADS = "4" > PARALLEL_MAKE = "-j 4" > > // add the following line for cedartrail MACHINE ?= "cedartrail" > OR > MACHINE ?= "cedartrail-nopvr" > as listed below http://git.yoctoproject.org/cgit/cgit.cgi/meta- > intel/tree/meta-cedartrail/conf/machine?h=danny > > # cd /home/user/development/build/<your-bsp-build-name> > # bitbake core-image-sato > > _______________________________________________ > meta-intel mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-intel _______________________________________________ meta-intel mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-intel _______________________________________________ meta-intel mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-intel
