Teemu, i had similar problems a few days ago with our E3825 based hardware. The most important thing is that you switched to the ltsi kernel where the Bay Trail support is backported from newer kernel versions. Bay Trail support was introduced from version 3.11 i think. You have to look for the following message in the kernel message buffer: [drm:i915_pci_probe] *ERROR* Preliminary hardware support disabled This means that the device file /dev/dri/card0 is not created and so the intel driver says that the device is not found. This message appears if you use the standard/base kernel version in yocto.
To switch to the ltsi kernel you have to set the following statement in the meta-isg/meta-valleyisland/recipes-kernel/linux/linux-yocto_3.10.bbappend: KBRANCH_valleyisland-32 = "standard/ltsi" SRCREV is also changed to the commit id for the tagged version of ltsi 3.10.32: SRCREV_machine_valleyisland-32 = "78afd3095c9b37efbbfbfdc25eb3833ef3c6a718" Yet I do not know how to manage such changes in a layer overlay. I have directly hacked the bbappend file currently. Hope this is of help for you. Falk ------------------------------------------------------ IGI - Ingenieur-Gesellschaft fuer Interfaces mbH Dipl.-Ing. Falk Bauer Applications Engineer Langenauer Str. 46 57223 Kreuztal, Germany Tel.: +49 2732 5525 0 Fax: +49 2732 5525 25 E-mail: f.ba...@igi-systems.com Internet: www.igi-systems.com -----------------------------------------------------------Ursprüngliche Nachricht----- Von: meta-intel-boun...@yoctoproject.org [mailto:meta-intel-boun...@yoctoproject.org] Im Auftrag von Keskinarkaus, Teemu Gesendet: Donnerstag, 3. April 2014 13:04 An: meta-intel@yoctoproject.org Betreff: [meta-intel] Valleyisland graphics in Dora Hi, I noticed that Dora branch has also finally got its Valleyisland support so I downloaded latest Dora-branch of meta-intel and also updated Dora-branch of Poky. I then rebuild my own image of it and it booted ok. The thing is that when I try to use any gl applications (for example glxinfo or glxgears) I get the following error: sh-4.2# glxinfo name of display: :0.0 Error: couldn't find RGB GLX visual or fbconfig Error: couldn't find RGB GLX visual or fbconfig What am I missing or is there a bug somewhere? I also have to use Vesa-driver for Xorg and not Intel driver. If I try to use Intel driver it says device not found. Any idea what might cause that? I thought that the Intel driver should support that HW with acceleration? I think Vesa-driver doesn't support acceleration or doe it? The HW I use have beta version of BIOS so could that be the display part of the BIOS is missing some display things or is that bug/configuration issue in software? I'm running Yocto on E3826 HW. Teemu Keskinarkaus Software system engineer maximatecc - Humans in control ________________________________ Actuant Corporation Email Notice This message is intended only for the use of the Addressee and may contain information that is PRIVILEGED and/or CONFIDENTIAL. This email is intended only for the personal and confidential use of the recipient(s) named above. If the reader of this email is not an intended recipient, you have received this email in error and any review, dissemination, distribution or copying is strictly prohibited. If you have received this email in error, please notify the sender immediately by return mail and permanently delete the copy you received. Thank you. -- _______________________________________________ meta-intel mailing list meta-intel@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-intel -- _______________________________________________ meta-intel mailing list meta-intel@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-intel
