On Wed, 2016-08-03 at 11:04 -0700, Jianxun Zhang wrote:
> Provide a README for RMC feature. Also check in fingerprints and
> configuration data for several boards as examples for users.
> They can be used for validation too.
> 
> Signed-off-by: Jianxun Zhang <jianxun.zh...@linux.intel.com>

Reviewed-by: Saul Wold <s...@linux.intel.com>


> ---
>  .../rmc/boards/T100-32bit/BOOTENTRY.CONFIG         |   2 +
>  .../rmc/boards/T100-32bit/T100-32bit.fp            | Bin 0 -> 116
> bytes
>  common/recipes-bsp/rmc/boards/T100-32bit/boot.conf |   4 +
>  .../recipes-bsp/rmc/boards/T100-32bit/install.conf |   4 +
>  .../rmc/boards/minnowmax/BOOTENTRY.CONFIG          |   1 +
>  common/recipes-bsp/rmc/boards/minnowmax/boot.conf  |   4 +
>  .../recipes-bsp/rmc/boards/minnowmax/minnowmax.fp  | Bin 0 -> 143
> bytes
>  .../rmc/boards/minnowmaxB3/BOOTENTRY.CONFIG        |   1 +
>  .../recipes-bsp/rmc/boards/minnowmaxB3/boot.conf   |   4 +
>  .../rmc/boards/minnowmaxB3/minnowmaxB3.fp          | Bin 0 -> 148
> bytes
>  .../rmc/boards/nucgen6/BOOTENTRY.CONFIG            |   2 +
>  .../rmc/boards/nucgen6/INSTALLER.CONFIG            |   6 +
>  common/recipes-bsp/rmc/boards/nucgen6/KBOOTPARAM   |   1 +
>  common/recipes-bsp/rmc/boards/nucgen6/boot.conf    |   4 +
>  common/recipes-bsp/rmc/boards/nucgen6/install.conf |   4 +
>  common/recipes-bsp/rmc/boards/nucgen6/mylib.conf   |   7 +
>  common/recipes-bsp/rmc/boards/nucgen6/nuc6.fp      | Bin 0 -> 149
> bytes
>  documentation/rmc/README                           | 343
> +++++++++++++++++++++
>  18 files changed, 387 insertions(+)
>  create mode 100644 common/recipes-bsp/rmc/boards/T100-
> 32bit/BOOTENTRY.CONFIG
>  create mode 100644 common/recipes-bsp/rmc/boards/T100-32bit/T100-
> 32bit.fp
>  create mode 100644 common/recipes-bsp/rmc/boards/T100-
> 32bit/boot.conf
>  create mode 100644 common/recipes-bsp/rmc/boards/T100-
> 32bit/install.conf
>  create mode 100644 common/recipes-
> bsp/rmc/boards/minnowmax/BOOTENTRY.CONFIG
>  create mode 100644 common/recipes-bsp/rmc/boards/minnowmax/boot.conf
>  create mode 100644 common/recipes-
> bsp/rmc/boards/minnowmax/minnowmax.fp
>  create mode 100644 common/recipes-
> bsp/rmc/boards/minnowmaxB3/BOOTENTRY.CONFIG
>  create mode 100644 common/recipes-
> bsp/rmc/boards/minnowmaxB3/boot.conf
>  create mode 100644 common/recipes-
> bsp/rmc/boards/minnowmaxB3/minnowmaxB3.fp
>  create mode 100644 common/recipes-
> bsp/rmc/boards/nucgen6/BOOTENTRY.CONFIG
>  create mode 100644 common/recipes-
> bsp/rmc/boards/nucgen6/INSTALLER.CONFIG
>  create mode 100644 common/recipes-bsp/rmc/boards/nucgen6/KBOOTPARAM
>  create mode 100644 common/recipes-bsp/rmc/boards/nucgen6/boot.conf
>  create mode 100644 common/recipes-
> bsp/rmc/boards/nucgen6/install.conf
>  create mode 100644 common/recipes-bsp/rmc/boards/nucgen6/mylib.conf
>  create mode 100644 common/recipes-bsp/rmc/boards/nucgen6/nuc6.fp
>  create mode 100644 documentation/rmc/README
> 
> diff --git a/common/recipes-bsp/rmc/boards/T100-
> 32bit/BOOTENTRY.CONFIG b/common/recipes-bsp/rmc/boards/T100-
> 32bit/BOOTENTRY.CONFIG
> new file mode 100644
> index 0000000..b2fabe8
> --- /dev/null
> +++ b/common/recipes-bsp/rmc/boards/T100-32bit/BOOTENTRY.CONFIG
> @@ -0,0 +1,2 @@
> +boot.conf
> +install.conf
> diff --git a/common/recipes-bsp/rmc/boards/T100-32bit/T100-32bit.fp
> b/common/recipes-bsp/rmc/boards/T100-32bit/T100-32bit.fp
> new file mode 100644
> index
> 0000000000000000000000000000000000000000..86ecea7344bfc744f7f9d57f3f1
> 810d6f7ba0db1
> GIT binary patch
> literal 116
> zcmZQ%Ehx%QDNQbk&r8frWe71eFbHvEV8SZOB2boERGgWg$KaV)lA5Ctq^aOolAo&)
> p;;X6P91yAyWo&L@px~fjsAp{K?oq{1&rp<FoLW?tn!<p>1_02dA-n(p
> 
> literal 0
> HcmV?d00001
> 
> diff --git a/common/recipes-bsp/rmc/boards/T100-32bit/boot.conf
> b/common/recipes-bsp/rmc/boards/T100-32bit/boot.conf
> new file mode 100644
> index 0000000..f1578e0
> --- /dev/null
> +++ b/common/recipes-bsp/rmc/boards/T100-32bit/boot.conf
> @@ -0,0 +1,4 @@
> +title T100T(32bit) boot
> +linux /vmlinuz
> +initrd /initrd
> +options LABEL=boot loglevel=8
> diff --git a/common/recipes-bsp/rmc/boards/T100-32bit/install.conf
> b/common/recipes-bsp/rmc/boards/T100-32bit/install.conf
> new file mode 100644
> index 0000000..67e7eb1
> --- /dev/null
> +++ b/common/recipes-bsp/rmc/boards/T100-32bit/install.conf
> @@ -0,0 +1,4 @@
> +title T100T(32bit) install
> +linux /vmlinuz
> +initrd /initrd
> +options LABEL=install-efi
> diff --git a/common/recipes-bsp/rmc/boards/minnowmax/BOOTENTRY.CONFIG 
> b/common/recipes-bsp/rmc/boards/minnowmax/BOOTENTRY.CONFIG
> new file mode 100644
> index 0000000..cb01ced
> --- /dev/null
> +++ b/common/recipes-bsp/rmc/boards/minnowmax/BOOTENTRY.CONFIG
> @@ -0,0 +1 @@
> +boot.conf
> diff --git a/common/recipes-bsp/rmc/boards/minnowmax/boot.conf
> b/common/recipes-bsp/rmc/boards/minnowmax/boot.conf
> new file mode 100644
> index 0000000..6e789cd
> --- /dev/null
> +++ b/common/recipes-bsp/rmc/boards/minnowmax/boot.conf
> @@ -0,0 +1,4 @@
> +title Minnow Max boot
> +linux /vmlinuz
> +initrd /initrd
> +options LABEL=boot console=ttyS0,115200n8
> diff --git a/common/recipes-bsp/rmc/boards/minnowmax/minnowmax.fp
> b/common/recipes-bsp/rmc/boards/minnowmax/minnowmax.fp
> new file mode 100644
> index
> 0000000000000000000000000000000000000000..3c5a286f33ad2e6b17de3bb6101
> 60532ce5d65cf
> GIT binary patch
> literal 143
> zcmZQ%Ehx%QDNQbk&r8frWe9Wh@o|j|^K=bYa5PW|@No=r^AGZ6U_w>po0*rFU+$Ej
> zSd^mR>lnenB2boERGgWg$KaV)lA5Ctq^aOolAo&);;X6P91yCY;A(7PWU8RxpkSzH
> XZ0zn)#Zb>slv<oxRF;~;fWig<I@~II
> 
> literal 0
> HcmV?d00001
> 
> diff --git a/common/recipes-
> bsp/rmc/boards/minnowmaxB3/BOOTENTRY.CONFIG b/common/recipes-
> bsp/rmc/boards/minnowmaxB3/BOOTENTRY.CONFIG
> new file mode 100644
> index 0000000..cb01ced
> --- /dev/null
> +++ b/common/recipes-bsp/rmc/boards/minnowmaxB3/BOOTENTRY.CONFIG
> @@ -0,0 +1 @@
> +boot.conf
> diff --git a/common/recipes-bsp/rmc/boards/minnowmaxB3/boot.conf
> b/common/recipes-bsp/rmc/boards/minnowmaxB3/boot.conf
> new file mode 100644
> index 0000000..577e5d6
> --- /dev/null
> +++ b/common/recipes-bsp/rmc/boards/minnowmaxB3/boot.conf
> @@ -0,0 +1,4 @@
> +title Minnow Max B3 boot
> +linux /vmlinuz
> +initrd /initrd
> +options LABEL=boot console=ttyS0,115200n8
> diff --git a/common/recipes-bsp/rmc/boards/minnowmaxB3/minnowmaxB3.fp 
> b/common/recipes-bsp/rmc/boards/minnowmaxB3/minnowmaxB3.fp
> new file mode 100644
> index
> 0000000000000000000000000000000000000000..ad3f0d6d7cfdada14a35227643c
> 5c67e0c608f7a
> GIT binary patch
> literal 148
> zcmZQ%Ehx%QDNQbk&r8frW$?|+%gZlM%1<mxQSeQyP;fF<2=H+Xaq|!IWnjXl)Cr>0
> zF@k|bpe(hhI5R(w!85NUHAf>zQ^Bz$KUX8fS5v_`AXGuY)!4$wR6)T(!BEfG*xjRw
> Sp`M{AwK%n?EH#Azg$)3>EG<0%
> 
> literal 0
> HcmV?d00001
> 
> diff --git a/common/recipes-bsp/rmc/boards/nucgen6/BOOTENTRY.CONFIG
> b/common/recipes-bsp/rmc/boards/nucgen6/BOOTENTRY.CONFIG
> new file mode 100644
> index 0000000..b2fabe8
> --- /dev/null
> +++ b/common/recipes-bsp/rmc/boards/nucgen6/BOOTENTRY.CONFIG
> @@ -0,0 +1,2 @@
> +boot.conf
> +install.conf
> diff --git a/common/recipes-bsp/rmc/boards/nucgen6/INSTALLER.CONFIG
> b/common/recipes-bsp/rmc/boards/nucgen6/INSTALLER.CONFIG
> new file mode 100644
> index 0000000..7d5378b
> --- /dev/null
> +++ b/common/recipes-bsp/rmc/boards/nucgen6/INSTALLER.CONFIG
> @@ -0,0 +1,6 @@
> +# This file specifies which file or dir RMC will  install onto
> target.
> +# Note the absolute path is referred from mount points in
> installation.
> +efi_entry_dir:root:disk:770:/boot/loader/entries/
> +boot.conf:root:disk:770:/boot/loader/entries/rmcboot.conf
> +mylibdir:root:root:770:/tgt_root/etc/mylib/
> +mylib.conf:root:root:660:/tgt_root/etc/mylib/mylib.conf
> diff --git a/common/recipes-bsp/rmc/boards/nucgen6/KBOOTPARAM
> b/common/recipes-bsp/rmc/boards/nucgen6/KBOOTPARAM
> new file mode 100644
> index 0000000..27943b4
> --- /dev/null
> +++ b/common/recipes-bsp/rmc/boards/nucgen6/KBOOTPARAM
> @@ -0,0 +1 @@
> +i915.preliminary_hw_support=1
> diff --git a/common/recipes-bsp/rmc/boards/nucgen6/boot.conf
> b/common/recipes-bsp/rmc/boards/nucgen6/boot.conf
> new file mode 100644
> index 0000000..e6ecb02
> --- /dev/null
> +++ b/common/recipes-bsp/rmc/boards/nucgen6/boot.conf
> @@ -0,0 +1,4 @@
> +title NUC Gen6 boot
> +linux /vmlinuz
> +initrd /initrd
> +options LABEL=boot
> diff --git a/common/recipes-bsp/rmc/boards/nucgen6/install.conf
> b/common/recipes-bsp/rmc/boards/nucgen6/install.conf
> new file mode 100644
> index 0000000..916bb04
> --- /dev/null
> +++ b/common/recipes-bsp/rmc/boards/nucgen6/install.conf
> @@ -0,0 +1,4 @@
> +title NUC Gen6 install
> +linux /vmlinuz
> +initrd /initrd
> +options LABEL=install-efi
> diff --git a/common/recipes-bsp/rmc/boards/nucgen6/mylib.conf
> b/common/recipes-bsp/rmc/boards/nucgen6/mylib.conf
> new file mode 100644
> index 0000000..fd8357c
> --- /dev/null
> +++ b/common/recipes-bsp/rmc/boards/nucgen6/mylib.conf
> @@ -0,0 +1,7 @@
> +# This is a demo conf file read by an imagined program or library
> +# which reads this file at runtime to customize its behavior.
> +# rmc will deploy it to the location specified in INSTALLER.CONFIG.
> +
> +lib.info = "V1.0 for rmc demo"
> +lib.board = "NUC gen 6"
> +prog.ui.layout = "minimal"
> diff --git a/common/recipes-bsp/rmc/boards/nucgen6/nuc6.fp
> b/common/recipes-bsp/rmc/boards/nucgen6/nuc6.fp
> new file mode 100644
> index
> 0000000000000000000000000000000000000000..834f800b63bc9cc2cd42e46059b
> afaec3701a9a2
> GIT binary patch
> literal 149
> zcmZQ%Ehx%QDNQbk&r8frWl$gl7?@Bs_=P%~Wts*@Ix(;al%*CGXXfWIc;=O)=4b?I
> yDmdpCrD}xuYAR%!>Y5pu8H6f02ZSm(C>ZKl7`S^>G1M~@r52|am8GUIps)do>LySC
> 
> literal 0
> HcmV?d00001
> 
> diff --git a/documentation/rmc/README b/documentation/rmc/README
> new file mode 100644
> index 0000000..ba476b0
> --- /dev/null
> +++ b/documentation/rmc/README
> @@ -0,0 +1,343 @@
> +Runtime Machine Configuration (RMC)
> +------------------------------------------------------------------
> --------------
> +Table of Contents
> +
> +Introduction
> +Usage
> +Enable RMC Feature
> +Examples
> +Troubleshooting
> +When you (don't) need RMC feature
> +
> +
> +Introduction:
> +------------------------------------------------------------------
> --------------
> +RMC Project - a light-weight project provide developers a mechanism
> to keep
> +their software implementation board-type agnostic, yet still able to
> customize
> +software behavior according to the type of a running board at
> runtime. Recipes
> +and bbclasses are available for other components to reuse to
> construct their own
> +RMC database.
> +
> +RMC Feature - An end-to-end solution based on RMC project to have a
> generic
> +image capable to apply board-type-specific quirks and configurations
> for a board
> +at runtime. It consists of a modified bootloader (systemd-boot), an
> updated EFI
> +installer, recipes, bbclass and RMC project.
> +
> +RMC feature supports special customizations cannot be covered by
> conventional
> +auto-detection features based on probing a hardware module because
> they happen
> +at a board or a product level. For example:
> + - tty console for kernel log output in kernel cmdline
> + - default audio route configuration
> + - network configuration
> + - UI layout
> + - requirement to software driven by a mechanical design
> + - or static configuration bits for a physical bus that doesn't
> support to
> +   identify devices or their presence at runtime
> +
> +An image with the feature has ability to configure supported boards
> with data
> +associated only to a type of board to get full functionality of the
> target at
> +runtime, yet still with a single image.
> +
> +Effect after installation is identical to what a conventional image
> specially
> +customized for a type of board (depending on the way to deploy
> image).
> +
> +Main functions of RMC Feature:
> +
> +Show board-specific boot entries in boot menu and boot system with
> configuration
> +(boot title, boot options, etc) in a selected boot entry.
> +
> +Support a "global" kernel boot command line fragment which is
> effective for all
> +boot entries.
> +
> +Deploy file blobs and create directories specific to the type of
> running board.
> +
> +Beside from this document, you can also find several built-in
> examples in
> +common/recipes-bsp/rmc/boards/. Refer to "Examples" section.
> +
> +You can also add new board types in your layer via a simple
> variable.
> +
> +
> +
> +Usage
> +------------------------------------------------------------------
> --------------
> +Developers are suggested to organize all board-specific files in
> their own layer
> +following this example, so that RMC recipes can pick up them
> correctly in build.
> +
> +- my_top_dir/                    Top directory of your board (Note
> 0)
> +  |- rmc-db.bbappend         bbappend file to rmc-db recipe at a
> lower level
> +  |- rmc/
> +      |- target_board_1/         subdirectory of a board.
> +      |   |- board1.fp           fingerprint file must be provided
> (NOTE 1)
> +      |   |- BOOTENTRY.CONFIG    optional config file for boot
> entries. (NOTE 2)
> +      |   |- INSTALLER.CONFIG    optional config file for installer.
> (NOTE 3)
> +      |   |- board_file_1        A file blob specific to the type of
> board
> +      |   |- board_file_2        An another file specific to the
> type of board
> +      |   |- ...more files
> +      |- target_board_2/         subdirectory of another board.
> +          |- board_2_v2.fp       fingerprint file for board 2.
> +          |- BOOTENTRY.CONFIG
> +          |- INSTALLER.CONFIG
> +          |- board_file_1
> +          |- ...more files
> +
> +Note 0:
> +To add your boards into RMC feature, simply put this line in your
> +rmc-db.bbappend:
> +
> +RMC_BOARD_DATA_DIRS_append := " ${THISDIR}/my_top_dir"
> +
> +RMC db recipe takes all top directories specified in
> RMC_BOARD_DATA_DIRS to
> +construct and deploy a central RMC database inside image. The
> bbclass of the
> +bare RMC project also provide function for other components to
> construct their
> +own RMC database file. Please refer to rmc-db.bbclass for more
> information.
> +
> +Subdirectory is not supported in a board's directory.
> +
> +Note 1:
> +Fingerprint files must be provided and with ".fp" at the end of
> their names.
> +Fingerprint can be obtained by running RMC tool on your board. An
> easy way is to
> +live-boot USB stick flashed with any image enabled this feature on
> your board,
> +then run this command:
> +
> +# rmc -F -o my_board.fp
> +
> +Or you will need to build RMC tool for the architecture of your
> board, 32 or
> +64 bit x86, from RMC project.
> +
> +You can run RMC tool without any argument to get usage and examples.
> +
> +DO NOT NAME ANY FILE ENDING WITH '.fp' IF IT IS NOT A RMC
> FINGERPRINT FILE.
> +
> +If you do need a .fp file deployed onto target, please rename it in
> source and
> +specify the real name of file on target in INSTALLER.CONFIG.
> +
> +Note 2:
> +At runtime, RMC bootloader tries to fetch this file specific to the
> board at run
> +time, then tries to fetch each boot entry file specified in
> BOOTENTRY.CONFIG and
> +show them in boot menu options. The format of this file is very
> simple. Each
> +line is the name of a boot entry file:
> +
> +boot.conf
> +Install.conf
> +myrmcboot.conf
> +
> +Name of a boot entry file is defined by developer so it can be
> anything. But the
> +name of config file is what RMC bootloader looks up in RMC database,
> so it must
> +be named BOOTENTRY.CONFIG.
> +
> +Bootloader skips loading entry conf files from disk once any entry
> is loaded
> +from RMC database.
> +
> +Note 3:
> +At runtime, RMC installer tries to fetch INSTALLER.CONFIG file
> specific to the
> +board, then tries to fetch each file specified in this config file,
> and then
> +deploy the file onto target with its permissions, UID, GID and other
> attributes
> +also specified in this config file if file for the board can be
> retrieved from
> +RMC database. The format of this file is (# is for comment line)
> +
> +# name:uid:gid:mode:path_on_target
> +# to create a directory, add a “/” at the end of path_on_target:
> +audio_policy:0:0:600:/etc/audio/
> +audio_def_policy:0:0:600:/etc/audio/audio_policy
> +
> +The above example creates /etc/audio directory first, then fetch a
> file named
> +“audio_def_policy” from RMC database for the board, then copy it to
> /etc/audio/
> +with a new name “audio_policy”.
> +
> +If this config file is not provided, No data in RMC database is
> deployed to the
> +target.
> +
> +Some steps defined by developers could not be supported on a
> filesystem.
> +Installer simply ignores any errors in RMC deployment stage.
> +
> +The name of this config file is what installer looks up first, so it
> must be
> +INSTALLER.CONFIG.
> +
> +
> +
> +Enable RMC Feature
> +------------------------------------------------------------------
> --------------
> +To Enable RMC feature in build, add the below lines in a conf file:
> +DISTRO_FEATURES_append = " rmc"
> +EFI_PROVIDER = "rmc-systemd-boot"
> +
> +Note:
> +Image could be still bootable if you only have either of two lines,
> but RMC
> +feature won't be fully functional.
> +
> +
> +
> +Examples
> +------------------------------------------------------------------
> --------------
> +We checked in configuration data in common/recipes-bsp/rmc/boards/
> for several
> +boards, to help users to understand the RMC feature. These examples
> are also for
> +validation. For any example you find not working as what this
> section depicts,
> +it should be treated as a bug to be fixed.
> +
> +To test this feature with examples, enable it and build an image
> first, then
> +boot the built image on supported boards. Examples are always built
> in when the
> +feature is enabled, except for the EXAMPLE 1.
> +
> +EXAMPLE 1: Support a new board type:
> +(1) enable the feature and do a build to get a live-boot image by
> adding these
> +    lines in conf/local.conf:
> +    DISTRO_FEATURES_append = " rmc"
> +    EFI_PROVIDER = "rmc-systemd-boot"
> +
> +(2) flash the image to a USB stick and boot it on your board
> +
> +(3) in super user mode, run "rmc -F -o my_board.fp"
> +
> +(4) create directories in your host "mkdir -p
> my_top_dir/my_rmc/my_board"
> +
> +(5) copy my_board.fp from target to my_top_dir/my_rmc/my_board/ on
> host
> +
> +(6) create a file my_top_dir/my_rmc/my_board/KBOOTPARAM, put some
> fake
> +    and harmless options in a single line, say, "loglevel=7"
> +
> +(7) create a file my_top_dir/rmc-db.bbappend, put this single line
> in it:
> +    RMC_BOARD_DATA_DIRS_append := " ${THISDIR}/my_rmc"
> +    From parent directory of my_top_dir, the tree should look like:
> +    my_top_dir/
> +        my_rmc/
> +            my_board/
> +                KBOOTPARAM
> +                my_board.fp
> +        rmc-db.bbappend
> +    Later, you can add more board directories in my_rmc directory.
> +
> +(8) modify build configuration to add my_top_dir into build, for
> example, put
> +    this line in a bblayers.conf:
> +    BBFILES += "/full/path/of/my_top_dir/rmc-db.bbappend"
> +
> +(9) build image again then boot it on your board
> +
> +(10) Once you login to shell, new options should be effective, run
> this command
> +     "cat /proc/cmdline" to verify the result.
> +
> +EXAMPLE 2: Board-specific boot entry
> +MinnowBoard MAX and B3 version:
> +common/recipes-bsp/rmc/boards/minnowmax
> +common/recipes-bsp/rmc/boards/minnowmaxB3
> +
> +We have found two identities (type of board) exist for the "same"
> Minnow Max
> +hardware, so they have to be treated as two different types of
> hardware. The two
> +examples show you a boot entry specific to a type of board. Titles
> shown in boot
> +menu have different names according to the type of running board,
> "Minnow Max
> +boot" or "Minnow Max B3 boot". in /proc/cmdline,
> "console=ttyS0,115200n8" shall
> +be there. Kernel prints logs from 6-pin FTDI serial port on Minnow
> Max(s). This
> +console setting is in board-specific entries, so you won't see it
> effective if
> +you select default "boot" entry to boot the device.
> +
> +EXAMPLE      3: Board-specific boot entry, global kernel cmdline
> and installer
> +NUC Gen 6:
> +common/recipes-bsp/rmc/boards/nucgen6
> +This is a combo example with all supported configuration data for
> NUC Gen 6
> +product. It shows two boot entries in bootloader menu when you boot
> image on NUC
> +Gen 6 product, with "NUC Gen6" in entry titles. There shall no any
> "console=" in
> +/proc/cmdline when you boot with either of two "NUC Gen6"entries. We
> designed it
> +this way because there is no accessible tty port on NUC Gen 6 with
> housing.
> +
> +This example also includes a global kernel cmdline fragment
> KBOOTPARAM. Content
> +of KBOOTPARAM shall be at the end of /proc/cmdline no matter which
> boot entry
> +you selected to boot NUC Gen6.
> +
> +INSTALLER.CONFIG directs installer to create a directory and deploy
> a file in it
> +when install the image on NUC Gen6.
> +
> +Choose "NUC Gen6 install" boot entry to boot shall start
> installation. Once
> +the device reboots after installation, we can verify the
> configurations.
> +
> +The boot entry "NUC Gen6 boot" shall be shown in boot menu.
> +
> +The content of KBOOTPARAM shall be in /proc/cmdline too.
> +
> +A directory /etc/mylib/ is created and a file "mylib.conf" is there.
> The content
> +of that file shall be what we put in mylib.conf in
> +common/recipes-bsp/rmc/boards/nucgen6
> +
> +EXAMPLE 4: For validation only
> +T100 (32bit):
> +common/recipes-bsp/rmc/boards/T100-32bit
> +This example is provided for validation on 32 bit X86 architecture.
> It doesn't
> +provide any new function not mentioned in above examples.
> +
> +
> +
> +Troubleshooting
> +------------------------------------------------------------------
> --------------
> +Issue: Cannot obtain RMC fingerprint for a board
> +
> +RMC tool requires UEFI BIOS and SMBIOS support in firmware. It
> doesn't support
> +other type of firmware, e.g. legacy BIOS. It also requires EFI
> driver enabled
> +in Linux kernel.
> +
> +Issue: Configuration for a board seems not effective at runtime.
> +
> +Check if board is booted from the storage where the image or
> installation lives
> +when you have multiple boot options in BIOS. On some old hardwares
> it is not
> +that obvious as you assume. A build image can support boot from both
> of legacy
> +and UEFI mode, but RMC only works with UEFI boot so far.
> +
> +Make sure configuration files (BOOTENTRY.CONFIG, INSTALLER.CONFIG
> and,
> +KBOOTPARAM ...) are properly named in the board directory.
> +
> +Make sure configuration files have correct contents.
> +
> +Some file attributes could not be supported by targeted file system.
> Installer
> +cannot setup file blobs as you wish. It simply move to the next step
> if a step
> +fails.
> +
> +Kernel command line can be customized globally with KBOOTPARAM or
> just in a boot
> +entry for the type of board. They have different effective scopes.
> +
> +If no any board-specific configuration becomes effective on your
> board but it
> +works on other boards of same product, you can run rmc tool to
> obtain
> +fingerprint file on your board and compare it with fingerprint of a
> working
> +board. It is possible they have different firmware versions and
> unluckily, some
> +information for fingerprint changes between two versions. You can
> update BIOS
> +on every board to the same BIOS version if it is feasible. Otherwise
> you have
> +to treat them as two different type of boards. We could extend rmc
> design to
> +allow multiple fingerprints in a board directory as a workaround.
> +
> +Issue: RMC reports error because it cannot find fingerprint when
> building image.
> +
> +Make sure you have a fingerprint file. Its name must be ended with
> '.fp'. You
> +can put a fingerprint file in a board directory and provide data
> later.
> +
> +Issue: Any problems the above troubleshooting cannot help
> +
> +Please report it to us. Extra information like the type of your
> board or a dump
> +file from dmidecode tool is helpful. We will investigate the problem
> and keep
> +improving this feature.
> +
> +
> +
> +
> +When you (don't) need RMC feature
> +------------------------------------------------------------------
> --------------
> +RMC feature is designed to as generic as possible, in order to
> support a large
> +number of types of boards. And it shall be designed not to break
> things when it
> +is disabled. These considerations help users to decide if they
> really need or
> +enable it.
> +
> +If you are satisfied with a dedicated build target and image for
> each board in
> +your development cycle (source, build, validation, release, etc),
> you don't need
> +this feature.
> +
> +If you have a generic build for multiple type of boards and features
> supported
> +by that build meet your needs to functionality on all of boards, you
> don't need
> +to have this feature or you can disable it until you need to check
> in the first
> +board's data, in order to apply a quirk or customization only for
> that board.
> +
> +If you want this feature but have concerns to see more and more
> boards' finger-
> +prints and data in a generic project, you can have another layer to
> hold all of
> +board-specific data to split them from a generic layer at source
> level. Another
> +suggestion is always seeking chances not to clone or copy a common
> configuration
> +to each board's directory.
> +
> +
> +
> +Thanks
> +
> +Jianxun Zhang <jianxun.zh...@linux.intel.com>
> -- 
> 2.7.4
> 
-- 
_______________________________________________
meta-intel mailing list
meta-intel@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-intel

Reply via email to