Only the first two K3 devices do not support multi-cert boot so lets make multi-cert the default and only add back sysfw.itb for these two devices.
Signed-off-by: Andrew Davis <a...@ti.com> --- conf/machine/include/am62xx.inc | 3 --- conf/machine/include/am64xx.inc | 3 --- conf/machine/include/am65xx.inc | 5 ++++- conf/machine/include/j7.inc | 2 -- conf/machine/include/k3.inc | 5 +---- conf/machine/j7-evm.conf | 3 +++ conf/machine/j7-hs-evm.conf | 1 - conf/machine/j7200-evm.conf | 3 --- conf/machine/j721s2-evm.conf | 3 --- 9 files changed, 8 insertions(+), 20 deletions(-) diff --git a/conf/machine/include/am62xx.inc b/conf/machine/include/am62xx.inc index ff857b97..7c902724 100644 --- a/conf/machine/include/am62xx.inc +++ b/conf/machine/include/am62xx.inc @@ -8,9 +8,6 @@ SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" TFA_K3_SYSTEM_SUSPEND = "1" -# AM62 supports multi-certificate images, use the same -IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}" - do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" diff --git a/conf/machine/include/am64xx.inc b/conf/machine/include/am64xx.inc index 7646c70a..bc5b085c 100644 --- a/conf/machine/include/am64xx.inc +++ b/conf/machine/include/am64xx.inc @@ -13,9 +13,6 @@ KERNEL_DEVICETREE = " \ ti/k3-am642-evm-nand.dtbo \ " -# AM64 supports multi-certificate images, use the same -IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}" - do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" diff --git a/conf/machine/include/am65xx.inc b/conf/machine/include/am65xx.inc index 1898f19c..b70d212f 100644 --- a/conf/machine/include/am65xx.inc +++ b/conf/machine/include/am65xx.inc @@ -22,9 +22,12 @@ KERNEL_DEVICETREE = " \ BBMULTICONFIG += "k3r5-sr2" -# Use default IMAGE_BOOT_FILES_LEGACY files +# Since J721e does not support multi-cert tiboot3.bin add standalone sysfw.itb +IMAGE_BOOT_FILES += "sysfw.itb" + # Since default sysfw.itb on AM65x is for SR2.0, add a version for SR1.0 IMAGE_BOOT_FILES += "sysfw-am65x-evm.itb" + do_image_wic[mcdepends] += "mc::k3r5-sr2:ti-sci-fw:do_deploy" do_image_tar[mcdepends] += "mc::k3r5-sr2:ti-sci-fw:do_deploy" diff --git a/conf/machine/include/j7.inc b/conf/machine/include/j7.inc index d3eda1a8..c187f299 100644 --- a/conf/machine/include/j7.inc +++ b/conf/machine/include/j7.inc @@ -4,8 +4,6 @@ SOC_FAMILY_append = ":j7" OPTEEMACHINE = "k3-j721e" OPTEEOUTPUTMACHINE = "k3" -# Use default IMAGE_BOOT_FILES_LEGACY files - # Set the list of device targets for ti-pdk class recipes TI_PDK_LIMIT_SOCS = "j721e j7200" TI_PDK_LIMIT_BOARDS = "j721e_evm j7200_evm" diff --git a/conf/machine/include/k3.inc b/conf/machine/include/k3.inc index f85e6b98..24741dee 100644 --- a/conf/machine/include/k3.inc +++ b/conf/machine/include/k3.inc @@ -41,10 +41,7 @@ MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 alsa ethernet pci" IMAGE_FSTYPES += "tar.xz wic.xz wic.bmap" -IMAGE_BOOT_FILES_LEGACY = "${SPL_BINARYNAME} u-boot.${UBOOT_SUFFIX} tiboot3.bin sysfw.itb" -IMAGE_BOOT_FILES_MULTI_CERT = "${SPL_BINARYNAME} u-boot.${UBOOT_SUFFIX} tiboot3.bin" - -IMAGE_BOOT_FILES ?= "${IMAGE_BOOT_FILES_LEGACY}" +IMAGE_BOOT_FILES ?= "${SPL_BINARYNAME} u-boot.${UBOOT_SUFFIX} tiboot3.bin" WKS_FILE ?= "sdimage-2part.wks" do_image_wic[depends] += "virtual/bootloader:do_deploy" diff --git a/conf/machine/j7-evm.conf b/conf/machine/j7-evm.conf index 1f47f00c..514695d6 100644 --- a/conf/machine/j7-evm.conf +++ b/conf/machine/j7-evm.conf @@ -9,6 +9,9 @@ MACHINE_FEATURES += "gpu" SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3" SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" +# Since J721e does not support multi-cert tiboot3.bin add standalone sysfw.itb +IMAGE_BOOT_FILES += "sysfw.itb" + KERNEL_DEVICETREE = " \ ti/k3-j721e-common-proc-board.dtb \ ti/k3-j721e-proc-board-tps65917.dtb \ diff --git a/conf/machine/j7-hs-evm.conf b/conf/machine/j7-hs-evm.conf index 629a5ccd..9b95ce7a 100644 --- a/conf/machine/j7-hs-evm.conf +++ b/conf/machine/j7-hs-evm.conf @@ -19,7 +19,6 @@ UBOOT_IMAGE = "u-boot.img_HS" BBMULTICONFIG += "k3r5-sr1-1" -# Use default IMAGE_BOOT_FILES_LEGACY files # Since default sysfw.itb on J7 is for SR1.1, add a version for SR1.0 IMAGE_BOOT_FILES += "sysfw-j721e-evm.itb" do_image_wic[mcdepends] += "mc::k3r5-sr1-1:ti-sci-fw:do_deploy" diff --git a/conf/machine/j7200-evm.conf b/conf/machine/j7200-evm.conf index 2565c90c..c8a03a7b 100644 --- a/conf/machine/j7200-evm.conf +++ b/conf/machine/j7200-evm.conf @@ -13,8 +13,5 @@ KERNEL_DEVICETREE = " \ UBOOT_MACHINE = "j7200_evm_a72_config" -# J7200 supports multi-certificate images, use the same -IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}" - do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" diff --git a/conf/machine/j721s2-evm.conf b/conf/machine/j721s2-evm.conf index e5ed0b73..a8898f12 100644 --- a/conf/machine/j721s2-evm.conf +++ b/conf/machine/j721s2-evm.conf @@ -17,8 +17,5 @@ KERNEL_DEVICETREE = " \ UBOOT_MACHINE = "j721s2_evm_a72_defconfig" -# J721S2 supports multi-certificate images, use the same -IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}" - do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy" -- 2.36.1
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#14778): https://lists.yoctoproject.org/g/meta-ti/message/14778 Mute This Topic: https://lists.yoctoproject.org/mt/91508259/21656 Group Owner: meta-ti+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-