On 10/18/22 12:40 PM, Ryan Eatmon via lists.yoctoproject.org wrote:
We want to start running upstream testing on a daily basis and reporting
the reuslts of our test plan. To do that we need some recipes that
point to the upstream of the repositories that need to be tracked.
Signed-off-by: Ryan Eatmon <reat...@ti.com>
---
.../u-boot/u-boot-ti-upstream_git.bb | 19 +++++
.../linux/linux-ti-upstream_git.bb | 75 +++++++++++++++++++
2 files changed, 94 insertions(+)
create mode 100644 meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-upstream_git.bb
create mode 100644 meta-ti-bsp/recipes-kernel/linux/linux-ti-upstream_git.bb
diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-upstream_git.bb
b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-upstream_git.bb
new file mode 100644
index 00000000..52c3c293
--- /dev/null
+++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-upstream_git.bb
@@ -0,0 +1,19 @@
+require u-boot-ti.inc
+
+LIC_FILES_CHKSUM =
"file://Licenses/README;md5=5a7450c57ffe5ae63fd732446b988025"
+
+PR = "r0"
+
+PV = "upstream"
+
+# For the un-initiated:
+# The actual URL you'd use with a git clone for example would be:
+# https://source.denx.de/u-boot/u-boot.git/
+# However, in the context of OE, we have to explicitly split things up:
+# a) we want it to use git fetcher - hence git:// prefix in GIT_URI (if we
+# used https here, we'd endup attempting wget instead of git)
+# b) and we want git fetcher to use https protocol, hence GIT_PROTOCOL as https
+UBOOT_GIT_URI = "git://source.denx.de/u-boot/u-boot.git"
+UBOOT_GIT_PROTOCOL = "https"
+SRCREV = "${AUTOREV}"
+
diff --git a/meta-ti-bsp/recipes-kernel/linux/linux-ti-upstream_git.bb
b/meta-ti-bsp/recipes-kernel/linux/linux-ti-upstream_git.bb
new file mode 100644
index 00000000..33778199
--- /dev/null
+++ b/meta-ti-bsp/recipes-kernel/linux/linux-ti-upstream_git.bb
@@ -0,0 +1,75 @@
+SECTION = "kernel"
+SUMMARY = "Mainline Linux kernel for TI devices (with ti-upstream-tools)"
+LICENSE = "GPL-2.0-only"
+LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
+
+inherit kernel
+
+DEFCONFIG_BUILDER = "${WORKDIR}/ti-upstream-tools/config/defconfig_builder.sh"
Nak, this is not upstream. Use the upstream defconfigs only,
"multi_v7_defconfig"
for all pre-K3, and "defconfig" for K3/ARM64.
Same for the below DTBOs, if the DTBO is not in upstream then it
should not be working here.
Both DTBO and extra TI defconfig support are going upstream now, so I
don't expect this to be a problem for much longer. However we need to
track that progress. Patching around our missing stuff in this integration
layer defeats the purpose of upstream testing.
Andrew
+require recipes-kernel/linux/setup-defconfig.inc
+require recipes-kernel/linux/kernel-rdepends.inc
+require recipes-kernel/linux/ti-kernel.inc
+
+DEPENDS += "gmp-native libmpc-native"
+
+KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT} \
+ ${EXTRA_DTC_ARGS}"
+
+S = "${WORKDIR}/git"
+
+BRANCH = "master"
+TOOLS_BRANCH = "master"
+
+# 5.15 Mainline version
+SRCREV = "${AUTOREV}"
+PV = "upstream+git${SRCPV}"
+
+# Append to the MACHINE_KERNEL_PR so that a new SRCREV will cause a rebuild
+MACHINE_KERNEL_PR:append = "b"
+PR = "${MACHINE_KERNEL_PR}"
+
+KERNEL_GIT_URI =
"git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git"
+KERNEL_GIT_PROTOCOL = "https"
+SRC_URI += " \
+
${KERNEL_GIT_URI};protocol=${KERNEL_GIT_PROTOCOL};branch=${BRANCH};name=linux \
+
git://git.ti.com/ti-linux-kernel/ti-upstream-tools.git;branch=${TOOLS_BRANCH};protocol=${KERNEL_GIT_PROTOCOL};name=ti-upstream-tools;destsuffix=ti-upstream-tools
\
+ file://defconfig \
+"
+
+SRCREV_ti-upstream-tools = "${AUTOREV}"
+SRCREV_FORMAT = "linux"
+
+KERNEL_DEVICETREE = ""
+
+kernel_do_compile:append() {
+ oe_runmake dtbs CC="${KERNEL_CC} $cc_extra " LD="${KERNEL_LD}"
${KERNEL_EXTRA_ARGS}
+ oe_runmake -C ${WORKDIR}/ti-upstream-tools LINUX=${S} DTC=${B}/scripts/dtc/dtc O=${B}
CC="${KERNEL_CC} $cc_extra " LD="${KERNEL_LD}" ${KERNEL_EXTRA_ARGS}
+}
+
+do_install:append() {
+ for dtbf in `find arch/${ARCH}/boot/dts/ \( -name '*.dtb' -or -name
'*.dtbo' \)`; do
+ dtb="$dtbf"
+ dtb_ext=${dtb##*.}
+ dtb_base_name=`basename $dtb .$dtb_ext`
+ dtb_path=`get_real_dtb_path_in_kernel "$dtb"`
+ install -m 0644 $dtbf
${D}/${KERNEL_IMAGEDEST}/$dtb_base_name.$dtb_ext
+ done
+}
+
+do_deploy:append() {
+ for dtbf in `find arch/${ARCH}/boot/dts/ \( -name '*.dtb' -or -name
'*.dtbo' \) -printf '%P\n'`; do
+ dtb="$dtbf"
+ dtb_ext=${dtb##*.}
+ dtb_base_name=`basename $dtb .$dtb_ext`
+ dtb_dir=`dirname $dtb`
+ install -d ${DEPLOYDIR}
+ install -m 0644
${D}/${KERNEL_IMAGEDEST}/$dtb_base_name.$dtb_ext
${DEPLOYDIR}/$dtb_base_name.$dtb_ext
+ done
+}
+
+do_shared_workdir:prepend() {
+ cd ${B}
+ echo >> Module.symvers
+}
+
+FILES:${KERNEL_PACKAGE_NAME}-devicetree += "/${KERNEL_IMAGEDEST}/*.itb"
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#15182):
https://lists.yoctoproject.org/g/meta-ti/message/15182
Mute This Topic: https://lists.yoctoproject.org/mt/94413827/21656
Group Owner: meta-ti+ow...@lists.yoctoproject.org
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
