Hello! On Thu, Nov 10, 2022 at 7:18 PM Denys Dmytriyenko <de...@denix.org> wrote: > From: Denys Dmytriyenko <de...@konsulko.com> > > Cleanup and unify again - omapl138-lcdk is the only platform supported in > the OMAP-L1 family. Plus there's no longer DaVinci family with corresponding > settings. Adjust accordingly.
We used to be able to build for am57xx-evm and beaglebone with just meta-ti-bsp. This patch seems to add a dependency on meta-ti-extras. Was this intended or has this always been required? Without meta-ti-extras: Parsing recipes...ERROR: ParseError at ../meta-ti/meta-ti-bsp/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb:2: Could not include required file recipes-ti/includes/ti-paths.inc ERROR: Parsing halted due to errors, see error messages above Thanks and greetings! Daniel Díaz yo...@danieldiaz.org > Please note, there's currently a bug building Rust on ARMv5 platforms: > https://bugzilla.yoctoproject.org/show_bug.cgi?id=14967 > > Signed-off-by: Denys Dmytriyenko <de...@konsulko.com> > --- > meta-ti-bsp/conf/machine/include/omapl1.inc | 2 -- > meta-ti-bsp/conf/machine/include/omapl138.inc | 14 +++++++++- > meta-ti-bsp/conf/machine/omapl138-lcdk.conf | 1 - > meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc | 1 - > .../linux/bundle-devicetree.inc | 26 ------------------- > .../linux/linux-ti-staging_5.10.bb | 1 - > .../recipes-ti/includes/ti-paths.inc | 3 --- > 7 files changed, 13 insertions(+), 35 deletions(-) > delete mode 100644 meta-ti-bsp/conf/machine/include/omapl1.inc > delete mode 100644 meta-ti-bsp/recipes-kernel/linux/bundle-devicetree.inc > > diff --git a/meta-ti-bsp/conf/machine/include/omapl1.inc > b/meta-ti-bsp/conf/machine/include/omapl1.inc > deleted file mode 100644 > index d0262c3f..00000000 > --- a/meta-ti-bsp/conf/machine/include/omapl1.inc > +++ /dev/null > @@ -1,2 +0,0 @@ > -require conf/machine/include/ti-soc.inc > -SOC_FAMILY:append = ":omapl1" > diff --git a/meta-ti-bsp/conf/machine/include/omapl138.inc > b/meta-ti-bsp/conf/machine/include/omapl138.inc > index c6eb0cd9..2e4a47a5 100644 > --- a/meta-ti-bsp/conf/machine/include/omapl138.inc > +++ b/meta-ti-bsp/conf/machine/include/omapl138.inc > @@ -1,2 +1,14 @@ > -require conf/machine/include/omapl1.inc > +require conf/machine/include/ti-soc.inc > SOC_FAMILY:append = ":omapl138" > + > +require conf/machine/include/arm/armv5/tune-arm926ejs.inc > + > +KERNEL_IMAGETYPE = "zImage" > + > +PREFERRED_PROVIDER_virtual/kernel ?= "linux-ti-staging" > +PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging" > +PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging" > + > +EXTRA_IMAGEDEPENDS += "virtual/bootloader" > + > +MACHINE_FEATURES = "kernel26 serial ethernet usbhost usbgadget mmc alsa" > diff --git a/meta-ti-bsp/conf/machine/omapl138-lcdk.conf > b/meta-ti-bsp/conf/machine/omapl138-lcdk.conf > index ba4d5645..b318f82d 100644 > --- a/meta-ti-bsp/conf/machine/omapl138-lcdk.conf > +++ b/meta-ti-bsp/conf/machine/omapl138-lcdk.conf > @@ -2,7 +2,6 @@ > #@NAME: OMAP-L138 LCDK > #@DESCRIPTION: Machine configuration for the TI OMAP-L138 LCDK board > > -require conf/machine/include/davinci.inc > require conf/machine/include/omapl138.inc > > UBOOT_MACHINE = "omapl138_lcdk_config" > diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc > b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc > index c0f876e3..d87dcbe1 100644 > --- a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc > +++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc > @@ -55,7 +55,6 @@ SYSROOT_DIRS += "/boot" > # SPL (Second Program Loader) to be loaded over UART > SPL_UART_BINARY = "u-boot-spl.bin" > SPL_UART_BINARY:k3r5 = "" > -SPL_UART_BINARY:lego-ev3 = "" > > SPL_UART_IMAGE ?= "${SPL_UART_BINARY}-${MACHINE}-${PV}-${PR}" > SPL_UART_SYMLINK ?= "${SPL_UART_BINARY}-${MACHINE}" > diff --git a/meta-ti-bsp/recipes-kernel/linux/bundle-devicetree.inc > b/meta-ti-bsp/recipes-kernel/linux/bundle-devicetree.inc > deleted file mode 100644 > index d259e58c..00000000 > --- a/meta-ti-bsp/recipes-kernel/linux/bundle-devicetree.inc > +++ /dev/null > @@ -1,26 +0,0 @@ > -# Upstream kernel-devicetree.bbclass only supports bundling the DTB with > -# zImage. The factory u-boot on lego-ev3 EEPROM only supports uImage, so we > -# append the DTB to the final uImage here. > - > -do_deploy:append() { > - if [ "${KERNEL_DEVICETREE_BUNDLE}" = "1" ]; then > - install -d ${DEPLOYDIR} > - for dtbf in ${KERNEL_DEVICETREE}; do > - dtb=`normalize_dtb "$dtbf"` > - dtb_ext=${dtb##*.} > - dtb_base_name=`basename $dtb .$dtb_ext` > - for type in ${KERNEL_IMAGETYPE_FOR_MAKE}; do > - if [ "$type" = "uImage" ]; then > - cat ${D}/${KERNEL_IMAGEDEST}/$type \ > - ${DEPLOYDIR}/$dtb_base_name-${KERNEL_DTB_NAME}.$dtb_ext \ > - > > ${DEPLOYDIR}/$type-$dtb_base_name-${KERNEL_DTB_NAME}.$dtb_ext.bin > - ln -sf > $type-$dtb_base_name-${KERNEL_DTB_NAME}.$dtb_ext.bin \ > - > ${DEPLOYDIR}/$type-$dtb_base_name-${KERNEL_DTB_LINK_NAME}.$dtb_ext.bin > - cat ${D}/${KERNEL_IMAGEDEST}/$type \ > - ${DEPLOYDIR}/$dtb_base_name-${KERNEL_DTB_NAME}.$dtb_ext \ > - > ${DEPLOYDIR}/$type > - fi > - done > - done > - fi > -} > diff --git a/meta-ti-bsp/recipes-kernel/linux/linux-ti-staging_5.10.bb > b/meta-ti-bsp/recipes-kernel/linux/linux-ti-staging_5.10.bb > index a0af03c5..bf230dbc 100644 > --- a/meta-ti-bsp/recipes-kernel/linux/linux-ti-staging_5.10.bb > +++ b/meta-ti-bsp/recipes-kernel/linux/linux-ti-staging_5.10.bb > @@ -8,7 +8,6 @@ inherit kernel > DEFCONFIG_BUILDER = "${S}/ti_config_fragments/defconfig_builder.sh" > require recipes-kernel/linux/setup-defconfig.inc > require recipes-kernel/linux/ti-uio.inc > -require recipes-kernel/linux/bundle-devicetree.inc > require recipes-kernel/linux/kernel-rdepends.inc > require recipes-kernel/linux/ti-kernel.inc > > diff --git a/meta-ti-extras/recipes-ti/includes/ti-paths.inc > b/meta-ti-extras/recipes-ti/includes/ti-paths.inc > index 5994ff0a..63c00e8c 100644 > --- a/meta-ti-extras/recipes-ti/includes/ti-paths.inc > +++ b/meta-ti-extras/recipes-ti/includes/ti-paths.inc > @@ -104,8 +104,5 @@ export TI_CGT7X_INSTALL_DIR = > "${STAGING_DIR_NATIVE}${TI_CGT7X_INSTALL_DI > export TI_K3_SECDEV_INSTALL_DIR = > "${STAGING_DIR_NATIVE}${TI_K3_SECDEV_INSTALL_DIR_RECIPE}" > > > -DSPSUFFIX:omapl137 = "x674" > DSPSUFFIX:omapl138 = "x674" > -DSPSUFFIX_ti816x = "xe674" > -DSPSUFFIX_ti814x = "xe674" > DSPSUFFIX ?= "x64P" > -- > 2.25.1 > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#15347): https://lists.yoctoproject.org/g/meta-ti/message/15347 Mute This Topic: https://lists.yoctoproject.org/mt/94950211/21656 Group Owner: meta-ti+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-