Ah right. Booting with S2 pressed booted the scarthgap bits. Thanks for the help!
On Tue, May 14, 2024 at 1:55 PM Denys Dmytriyenko <de...@denix.org> wrote: > 1. U-boot and SPL seem to be old from Dunfell > > 2. Check your env: > > > append: root=PARTUUID= rootwait rw earlycon console=ttyO0,115200n8,115200 > ... > > [ 3.961253] VFS: PARTUUID= is invalid. > > [ 3.961253] Expected PARTUUID=<valid-uuid-id>[/PARTNROFF=%d] > > [ 3.970800] Disabling rootwait; root= is invalid. > > [ 3.977324] /dev/root: Can't open blockdev > > [ 3.981716] VFS: Cannot open root device "PARTUUID=" or > > unknown-block(0,0): error -6 > > [ 3.989649] Please append a correct "root=" boot option; here are the > > -- > Denys > > > On Tue, May 14, 2024 at 01:24:37PM -0700, Joel Winarske wrote: > > What's the status of bbb on scarthgap? > > > > Three weeks or so ago it would boot, only SGX driver was not loading. > > > > Today I get a kernel panic. Last week Scott Murray was saying to set > > kernel preference to 6.1, which appears to be the default now. > > > > I would appreciate any assistance with this. > > > > > > U-Boot SPL 2019.04-00002-g31a8ae0206 (May 13 2020 - 09:26:17 -0500) > > Trying to boot from MMC2 > > Loading Environment from EXT4... > > ** Unable to use mmc 0:1 for loading the env ** > > > > > > U-Boot 2019.04-00002-g31a8ae0206 (May 13 2020 - 09:26:17 -0500), Build: > > jenkins-github_Bootloader-Builder-139 > > > > CPU : AM335X-GP rev 2.1 > > I2C: ready > > DRAM: 512 MiB > > No match for driver 'omap_hsmmc' > > No match for driver 'omap_hsmmc' > > Some drivers were not found > > Reset Source: Power-on reset has occurred. > > RTC 32KCLK Source: External. > > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > > Loading Environment from EXT4... > > ** Unable to use mmc 0:1 for loading the env ** > > Board: BeagleBone Black > > <ethaddr> not set. Validating first E-fuse MAC > > BeagleBone Black: > > BeagleBone: cape eeprom: i2c_probe: 0x54: > > BeagleBone: cape eeprom: i2c_probe: 0x55: > > BeagleBone: cape eeprom: i2c_probe: 0x56: > > BeagleBone: cape eeprom: i2c_probe: 0x57: > > Net: eth0: MII MODE > > cpsw, usb_ether > > Press SPACE to abort autoboot in 0 seconds > > board_name=[A335BNLT] ... > > board_rev=[00C0] ... > > switch to partitions #0, OK > > mmc0 is current device > > SD/MMC found on device 0 > > switch to partitions #0, OK > > mmc0 is current device > > Scanning mmc 0:1... > > Found /extlinux/extlinux.conf > > Retrieving file: /extlinux/extlinux.conf > > 218 bytes read in 6 ms (35.2 KiB/s) > > 1: Poky (Yocto Project Reference Distro) > > Retrieving file: /extlinux/../zImage > > 12653056 bytes read in 800 ms (15.1 MiB/s) > > append: root=PARTUUID= rootwait rw earlycon console=ttyO0,115200n8,115200 > > Retrieving file: /extlinux/../am335x-boneblack.dtb > > 99078 bytes read in 13 ms (7.3 MiB/s) > > ## Flattened Device Tree blob at 88000000 > > Booting using the fdt blob at 0x88000000 > > Loading Device Tree to 8ffe4000, end 8ffff305 ... OK > > > > Starting kernel ... > > > > [ 0.000000] Booting Linux on physical CPU 0x0 > > [ 0.000000] Linux version 6.1.69-ti (oe-user@oe-host) > > (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) > > 2.42.0.20240216) #1 SMP PREEMPT Mon Jan 29 18:204 > > [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), > > cr=10c5387d > > [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing > > instruction cache > > [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black > > [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') > > [ 0.000000] printk: bootconsole [omap8250] enabled > > [ 0.000000] Memory policy: Data cache writeback > > [ 0.000000] efi: UEFI not found. > > [ 0.000000] cma: Reserved 48 MiB at 0x9c800000 > > [ 0.000000] Zone ranges: > > [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] > > [ 0.000000] HighMem empty > > [ 0.000000] Movable zone start for each node > > [ 0.000000] Early memory node ranges > > [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] > > [ 0.000000] Initmem setup node 0 [mem > > 0x0000000080000000-0x000000009fdfffff] > > [ 0.000000] CPU: All CPU(s) started in SVC mode. > > [ 0.000000] AM335X ES2.1 (sgx neon) > > [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 > > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: > 129412 > > [ 0.000000] Kernel command line: root=PARTUUID= rootwait rw earlycon > > console=ttyO0,115200n8,115200 > > [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 > > bytes, linear) > > [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 > > bytes, linear) > > [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap > free:off > > [ 0.000000] Memory: 442892K/522240K available (16384K kernel code, > 1686K > > rwdata, 4440K rodata, 1024K init, 455K bss, 30196K reserved, 49152K > > cma-reserved, 0K highmem) > > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > > [ 0.000000] ftrace: allocating 50610 entries in 149 pages > > [ 0.000000] ftrace: allocated 149 pages with 4 groups > > [ 0.000000] trace event string verifier disabled > > [ 0.000000] rcu: Preemptible hierarchical RCU implementation. > > [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to > nr_cpu_ids=1. > > [ 0.000000] Trampoline variant of Tasks RCU enabled. > > [ 0.000000] Rude variant of Tasks RCU enabled. > > [ 0.000000] Tracing variant of Tasks RCU enabled. > > [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is > > 25 jiffies. > > [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, > nr_cpu_ids=1 > > [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 > > [ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 > > interrupts > > [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on > > contention. > > [ 0.000000] TI gptimer clocksource: always-on > /ocp/interconnect@44c00000 > > /segment@200000/target-module@31000 > > [ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps > every > > 89478484971ns > > [ 0.008068] clocksource: dmtimer: mask: 0xffffffff max_cycles: > > 0xffffffff, max_idle_ns: 79635851949 ns > > [ 0.018002] TI gptimer clockevent: 24000000 Hz at > > /ocp/interconnect@48000000/segment@0/target-module@40000 > > [ 0.029329] Console: colour dummy device 80x30 > > [ 0.034029] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' > > [ 0.040765] This ensures that you still see kernel messages. Please > > [ 0.047223] update your kernel commandline. > > [ 0.051587] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) > > [ 0.074478] CPU: Testing write buffer coherency: ok > > [ 0.079591] CPU0: Spectre v2: using BPIALL workaround > > [ 0.084801] pid_max: default: 32768 minimum: 301 > > [ 0.090028] LSM: Security Framework initializing > > [ 0.094923] landlock: Up and running. > > [ 0.098710] Yama: becoming mindful. > > [ 0.102614] AppArmor: AppArmor initialized > > [ 0.106865] TOMOYO Linux initialized > > [ 0.110599] LSM support for eBPF active > > [ 0.114831] Mount-cache hash table entries: 1024 (order: 0, 4096 > bytes, > > linear) > > [ 0.122385] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 > > bytes, linear) > > [ 0.134142] cblist_init_generic: Setting adjustable number of callback > > queues. > > [ 0.141692] cblist_init_generic: Setting shift to 0 and lim to 1. > > [ 0.148206] cblist_init_generic: Setting adjustable number of callback > > queues. > > [ 0.155687] cblist_init_generic: Setting shift to 0 and lim to 1. > > [ 0.162178] cblist_init_generic: Setting adjustable number of callback > > queues. > > [ 0.169653] cblist_init_generic: Setting shift to 0 and lim to 1. > > [ 0.176195] Setting up static identity map for 0x80100000 - 0x80100060 > > [ 0.183196] rcu: Hierarchical SRCU implementation. > > [ 0.188174] rcu: Max phase no-delay instances is 1000. > > [ 0.195209] EFI services will not be available. > > [ 0.200736] smp: Bringing up secondary CPUs ... > > [ 0.205481] smp: Brought up 1 node, 1 CPU > > [ 0.209628] SMP: Total of 1 processors activated (995.32 BogoMIPS). > > [ 0.216099] CPU: All CPU(s) started in SVC mode. > > [ 0.221891] devtmpfs: initialized > > [ 0.248887] VFP support v0.3: implementor 41 architecture 3 part 30 > > variant c rev 3 > > [ 0.257438] clocksource: jiffies: mask: 0xffffffff max_cycles: > > 0xffffffff, max_idle_ns: 7645041785100000 ns > > [ 0.267544] futex hash table entries: 256 (order: 2, 16384 bytes, > linear) > > [ 0.279749] pinctrl core: initialized pinctrl subsystem > > [ 0.286562] DMI not present or invalid. > > [ 0.291573] NET: Registered PF_NETLINK/PF_ROUTE protocol family > > [ 0.306527] DMA: preallocated 256 KiB pool for atomic coherent > > allocations > > [ 0.314286] audit: initializing netlink subsys (disabled) > > [ 0.321360] thermal_sys: Registered thermal governor 'fair_share' > > [ 0.321384] thermal_sys: Registered thermal governor 'bang_bang' > > [ 0.327762] audit: type=2000 audit(0.232:1): state=initialized > > audit_enabled=0 res=1 > > [ 0.341952] thermal_sys: Registered thermal governor 'step_wise' > > [ 0.341961] thermal_sys: Registered thermal governor 'user_space' > > [ 0.348159] thermal_sys: Registered thermal governor 'power_allocator' > > [ 0.354588] cpuidle: using governor ladder > > [ 0.365590] cpuidle: using governor menu > > [ 0.392937] hw-breakpoint: debug architecture 0x4 unsupported. > > [ 0.413611] kprobes: kprobe jump-optimization is enabled. All kprobes > > are optimized if possible. > > [ 0.441354] raid6: skipped pq benchmark and selected neonx8 > > [ 0.452017] raid6: using neon recovery algorithm > > [ 0.468087] iommu: Default domain type: Translated > > [ 0.473185] iommu: DMA domain TLB invalidation policy: strict mode > > [ 0.489780] SCSI subsystem initialized > > [ 0.501001] usbcore: registered new interface driver usbfs > > [ 0.512146] usbcore: registered new interface driver hub > > [ 0.524089] usbcore: registered new device driver usb > > [ 0.536781] pps_core: LinuxPPS API ver. 1 registered > > [ 0.548015] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 > Rodolfo > > Giometti <giome...@linux.it> > > [ 0.564043] PTP clock support registered > > [ 0.577552] NetLabel: Initializing > > [ 0.588018] NetLabel: domain hash size = 128 > > [ 0.592525] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO > > [ 0.604158] NetLabel: unlabeled traffic allowed by default > > [ 0.620692] clocksource: Switched to clocksource dmtimer > > [ 0.634086] VFS: Disk quotas dquot_6.6.0 > > [ 0.644882] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 > > bytes) > > [ 0.656972] FS-Cache: Loaded > > [ 0.664821] CacheFiles: Loaded > > [ 0.673204] AppArmor: AppArmor Filesystem Enabled > > [ 0.704059] NET: Registered PF_INET protocol family > > [ 0.717040] IP idents hash table entries: 8192 (order: 4, 65536 bytes, > > linear) > > [ 0.734482] tcp_listen_portaddr_hash hash table entries: 512 (order: > 0, > > 4096 bytes, linear) > > [ 0.752899] Table-perturb hash table entries: 65536 (order: 6, 262144 > > bytes, linear) > > [ 0.768718] TCP established hash table entries: 4096 (order: 2, 16384 > > bytes, linear) > > [ 0.784765] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, > > linear) > > [ 0.800775] TCP: Hash tables configured (established 4096 bind 4096) > > [ 0.813054] MPTCP token hash table entries: 512 (order: 1, 8192 bytes, > > linear) > > [ 0.828795] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) > > [ 0.844723] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, > > linear) > > [ 0.857230] NET: Registered PF_UNIX/PF_LOCAL protocol family > > [ 0.873449] RPC: Registered named UNIX socket transport module. > > [ 0.884695] RPC: Registered udp transport module. > > [ 0.892688] RPC: Registered tcp transport module. > > [ 0.904698] RPC: Registered tcp NFSv4.1 backchannel transport module. > > [ 0.916707] NET: Registered PF_XDP protocol family > > [ 2.057584] Initialise system trusted keyrings > > [ 2.064353] workingset: timestamp_bits=14 max_order=17 bucket_order=3 > > [ 2.081692] zbud: loaded > > [ 2.089227] NFS: Registering the id_resolver key type > > [ 2.094600] Key type id_resolver registered > > [ 2.098937] Key type id_legacy registered > > [ 2.103293] nfs4filelayout_init: NFSv4 File Layout Driver > Registering... > > [ 2.110222] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver > > Registering... > > [ 2.117932] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, > > Inc. > > [ 2.126320] fuse: init (API version 7.37) > > [ 2.223398] NET: Registered PF_ALG protocol family > > [ 2.228520] xor: measuring software checksum speed > > [ 2.241238] arm4regs : 1270 MB/sec > > [ 2.254710] 8regs : 1099 MB/sec > > [ 2.268180] 32regs : 1099 MB/sec > > [ 2.278200] neon : 1783 MB/sec > > [ 2.282696] xor: using function: neon (1783 MB/sec) > > [ 2.287741] Key type asymmetric registered > > [ 2.291976] Asymmetric key parser 'x509' registered > > [ 2.299642] alg: self-tests for CTR-KDF (hmac(sha256)) passed > > [ 2.306168] Block layer SCSI generic (bsg) driver version 0.4 loaded > > (major 244) > > [ 2.314270] io scheduler mq-deadline registered > > [ 2.326615] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled > > [ 2.354956] loop: module loaded > > [ 2.358858] SPI driver tps6594 has no spi_device_id for ti,tps6594-q1 > > [ 2.365541] SPI driver tps6594 has no spi_device_id for ti,tps6593-q1 > > [ 2.372185] SPI driver tps6594 has no spi_device_id for ti,lp8764-q1 > > [ 2.383380] usbcore: registered new interface driver smsc95xx > > [ 2.393632] i2c_dev: i2c /dev entries driver > > [ 2.398311] Driver for 1-wire Dallas network protocol. > > [ 2.405002] softdog: initialized. soft_noboot=0 soft_margin=60 sec > > soft_panic=0 (nowayout=0) > > [ 2.413734] softdog: soft_reboot_cmd=<not set> > > soft_active_on_boot=0 > > [ 2.422541] cpuidle: enable-method property 'ti,am3352' found > operations > > [ 2.430352] sdhci: Secure Digital Host Controller Interface driver > > [ 2.436776] sdhci: Copyright(c) Pierre Ossman > > [ 2.441277] sdhci-pltfm: SDHCI platform and OF driver helper > > [ 2.447615] ledtrig-cpu: registered to indicate activity on CPUs > > [ 2.454533] hid: raw HID events driver (C) Jiri Kosina > > [ 2.460601] usbcore: registered new interface driver usbhid > > [ 2.466401] usbhid: USB HID core driver > > [ 2.472766] NET: Registered PF_INET6 protocol family > > [ 2.482755] Segment Routing with IPv6 > > [ 2.486926] In-situ OAM (IOAM) with IPv6 > > [ 2.491263] mip6: Mobile IPv6 > > [ 2.494566] NET: Registered PF_PACKET protocol family > > [ 2.500227] Key type dns_resolver registered > > [ 2.504771] mpls_gso: MPLS GSO support > > [ 2.508856] ThumbEE CPU extension supported. > > [ 2.513298] Registering SWP/SWPB emulation handler > > [ 2.518251] omap_voltage_late_init: Voltage driver support not added > > [ 2.526359] registered taskstats version 1 > > [ 2.530792] Loading compiled-in X.509 certificates > > [ 2.536739] zswap: loaded using pool lzo/zbud > > [ 2.542631] Key type .fscrypt registered > > [ 2.546840] Key type fscrypt-provisioning registered > > [ 2.561788] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, > fsverity=yes > > [ 2.571469] Key type encrypted registered > > [ 2.575883] AppArmor: AppArmor sha1 policy hashing enabled > > [ 2.581759] ima: No TPM chip found, activating TPM-bypass! > > [ 2.587664] ima: Allocated hash algorithm: sha256 > > [ 2.592803] ima: No architecture policies found > > [ 2.597661] evm: Initialising EVM extended attributes: > > [ 2.602985] evm: security.selinux > > [ 2.606412] evm: security.SMACK64 (disabled) > > [ 2.610825] evm: security.SMACK64EXEC (disabled) > > [ 2.615587] evm: security.SMACK64TRANSMUTE (disabled) > > [ 2.620799] evm: security.SMACK64MMAP (disabled) > > [ 2.625560] evm: security.apparmor > > [ 2.629071] evm: security.ima > > [ 2.632121] evm: security.capability > > [ 2.635810] evm: HMAC attrs: 0x1 > > [ 2.683301] remoteproc remoteproc0: wkup_m3 is available > > [ 2.702524] pinctrl-single 44e10800.pinmux: 142 pins, size 568 > > [ 2.715024] ti-sysc: probe of 44e31000.target-module failed with error > > -16 > > [ 2.726119] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 > > sec > > [ 2.737737] omap_rtc 44e3e000.rtc: registered as rtc0 > > [ 2.743061] omap_rtc 44e3e000.rtc: setting system clock to > > 2000-01-01T00:00:00 UTC (946684800) > > [ 2.763281] ti-sysc: probe of 48040000.target-module failed with error > > -16 > > [ 2.785171] gpio gpiochip0: (gpio-0-31): not an immutable chip, please > > consider fixing it! > > [ 2.794444] OMAP GPIO hardware version 0.1 > > [ 2.805375] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 > > [ 2.818643] at24 2-0054: supply vcc not found, using dummy regulator > > [ 2.856849] at24 2-0055: supply vcc not found, using dummy regulator > > [ 2.892531] at24 2-0056: supply vcc not found, using dummy regulator > > [ 2.928560] at24 2-0057: supply vcc not found, using dummy regulator > > [ 2.964125] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz > > [ 2.975562] gpio gpiochip1: (gpio-32-63): not an immutable chip, > please > > consider fixing it! > > [ 2.987140] gpio gpiochip2: (gpio-64-95): not an immutable chip, > please > > consider fixing it! > > [ 3.001969] sdhci-omap 481d8000.mmc: supply pbias not found, using > dummy > > regulator > > [ 3.018359] sdhci-omap 481d8000.mmc: supply vqmmc not found, using > dummy > > regulator > > [ 3.028511] omap_rng 48310000.rng: Random Number Generator ver. 20 > > [ 3.035855] random: crng init done > > [ 3.092730] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus > > freq 1000000 > > [ 3.126125] SMSC LAN8710/LAN8720: probe of 4a101000.mdio:00 failed > with > > error -5 > > [ 3.133894] davinci_mdio 4a101000.mdio: phy[0]: device > 4a101000.mdio:00, > > driver SMSC LAN8710/LAN8720 > > [ 3.144040] cpsw-switch 4a100000.switch: initialized cpsw ale version > 1.4 > > [ 3.151110] cpsw-switch 4a100000.switch: ALE Table size 1024 > > [ 3.157084] cpsw-switch 4a100000.switch: cpts: overflow check period > > 1250 (jiffies) > > [ 3.165001] cpsw-switch 4a100000.switch: CPTS: ref_clk_freq:250000000 > > calc_mult:2147483648 calc_shift:29 error:0 nsec/sec > > [ 3.176410] cpsw-switch 4a100000.switch: Detected MACID = > > 68:5e:1c:03:07:bf > > [ 3.185575] cpsw-switch 4a100000.switch: initialized (regs 0x4a100000, > > pool size 256) hw_ver:0019010C 1.12 (0) > > [ 3.210379] debugfs: Directory '49000000.dma' with parent 'dmaengine' > > already present! > > [ 3.218638] edma 49000000.dma: TI EDMA DMA engine driver > > [ 3.230547] am335x-phy-driver 47401300.usb-phy: supply vcc not found, > > using dummy regulator > > [ 3.239674] am335x-phy-driver 47401300.usb-phy: dummy supplies not > > allowed for exclusive requests > > [ 3.255611] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, > > using dummy regulator > > [ 3.264906] am335x-phy-driver 47401b00.usb-phy: dummy supplies not > > allowed for exclusive requests > > [ 3.288119] musb-hdrc musb-hdrc.1: MUSB HDRC host driver > > [ 3.293805] musb-hdrc musb-hdrc.1: new USB bus registered, assigned > bus > > number 1 > > [ 3.301785] usb usb1: New USB device found, idVendor=1d6b, > > idProduct=0002, bcdDevice= 6.01 > > [ 3.310336] usb usb1: New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 > > [ 3.317791] usb usb1: Product: MUSB HDRC host driver > > [ 3.322915] usb usb1: Manufacturer: Linux 6.1.69-ti musb-hcd > > [ 3.328755] usb usb1: SerialNumber: musb-hdrc.1 > > [ 3.334399] hub 1-0:1.0: USB hub found > > [ 3.338446] hub 1-0:1.0: 1 port detected > > [ 3.364408] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 > > [ 3.370789] omap-sham 53100000.sham: will run requests pump with > > realtime priority > > [ 3.382899] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 > > [ 3.389523] omap-aes 53500000.aes: will run requests pump with > realtime > > priority > > [ 3.405436] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 > > counters available > > [ 3.419147] l3-aon-clkctrl:0000:0: failed to disable > > [ 3.427855] gpio gpiochip3: (gpio-96-127): not an immutable chip, > please > > consider fixing it! > > [ 3.439204] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 41, > > base_baud = 3000000) is a 8250 > > [ 3.448493] printk: console [ttyS0] enabled > > [ 3.448493] printk: console [ttyS0] enabled > > [ 3.457110] printk: bootconsole [omap8250] disabled > > [ 3.457110] printk: bootconsole [omap8250] disabled > > [ 3.493448] tps65217-pmic: Failed to locate of_node [id: -1] > > [ 3.510500] tps65217-bl: Failed to locate of_node [id: -1] > > [ 3.520003] tps65217 0-0024: TPS65217 ID 0xe version 1.2 > > [ 3.527310] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 > > bytes/write > > [ 3.534718] i2c 0-0070: Fixed dependency cycle(s) with > > /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 > > /port/endpoint@0 > > [ 3.667523] tda998x 0-0070: found TDA19988 > > [ 3.675108] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz > > [ 3.683307] omap_gpio 44e07000.gpio: Could not set line 6 debounce to > > 200000 microseconds (-22) > > [ 3.693654] tilcdc 4830e000.lcdc: bound 0-0070 (ops 0xc11bf9a8) > > [ 3.699748] sdhci-omap 48060000.mmc: Got CD GPIO > > [ 3.705997] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc > on > > minor 0 > > [ 3.713860] sdhci-omap 48060000.mmc: supply pbias not found, using > dummy > > regulator > > [ 3.723323] sdhci-omap 48060000.mmc: supply vqmmc not found, using > dummy > > regulator > > [ 3.757212] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] > using > > External DMA > > [ 3.828717] mmc0: new high speed SDHC card at address aaaa > > [ 3.833620] mmcblk0: mmc0:aaaa SD32G 29.7 GiB > > [ 3.837419] mmcblk0: p1 p2 > > [ 3.839151] Console: switching to colour frame buffer device 160x64 > > [ 3.868128] tilcdc 4830e000.lcdc: [drm] fb0: tilcdcdrmfb frame buffer > > device > > [ 3.878981] sdhci-omap 481d8000.mmc: supply pbias not found, using > dummy > > regulator > > [ 3.891295] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set > > [ 3.899587] sdhci-omap 481d8000.mmc: supply vqmmc not found, using > dummy > > regulator > > [ 3.910419] input: tps65217_pwrbutton as > > > /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000 > > /44e0b000.target-module/44e0b000.i2c/i2c-0/0-0 > > [ 3.952837] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] > using > > External DMA > > [ 3.961253] VFS: PARTUUID= is invalid. > > [ 3.961253] Expected PARTUUID=<valid-uuid-id>[/PARTNROFF=%d] > > [ 3.970800] Disabling rootwait; root= is invalid. > > [ 3.977324] /dev/root: Can't open blockdev > > [ 3.981716] VFS: Cannot open root device "PARTUUID=" or > > unknown-block(0,0): error -6 > > [ 3.989649] Please append a correct "root=" boot option; here are the > > available partitions: > > [ 3.998200] b300 31166976 mmcblk0 > > [ 3.998216] driver: mmcblk > > [ 4.005313] b301 131072 mmcblk0p1 076c4a2a-01 > > [ 4.005328] > > [ 4.012322] b302 2027747 mmcblk0p2 076c4a2a-02 > > [ 4.012334] > > [ 4.019437] Kernel panic - not syncing: VFS: Unable to mount root fs > on > > unknown-block(0,0) > > [ 4.027753] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.69-ti #1 > > [ 4.033966] Hardware name: Generic AM33XX (Flattened Device Tree) > > [ 4.040101] unwind_backtrace from show_stack+0x18/0x1c > > [ 4.045389] show_stack from dump_stack_lvl+0x40/0x4c > > [ 4.050478] dump_stack_lvl from panic+0x11c/0x35c > > [ 4.055310] panic from mount_block_root+0x158/0x1f4 > > [ 4.060314] mount_block_root from prepare_namespace+0x158/0x194 > > [ 4.066358] prepare_namespace from kernel_init_freeable+0x254/0x268 > > [ 4.072750] kernel_init_freeable from kernel_init+0x20/0x13c > > [ 4.078531] kernel_init from ret_from_fork+0x14/0x28 > > [ 4.083614] Exception stack(0xe0009fb0 to 0xe0009ff8) > > [ 4.088692] 9fa0: 00000000 > 00000000 > > 00000000 00000000 > > [ 4.096909] 9fc0: 00000000 00000000 00000000 00000000 00000000 > 00000000 > > 00000000 00000000 > > [ 4.105124] 9fe0: 00000000 00000000 00000000 00000000 00000013 > 00000000 > > [ 4.111788] ---[ end Kernel panic - not syncing: VFS: Unable to mount > > root fs on unknown-block(0,0) ]--- >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#17658): https://lists.yoctoproject.org/g/meta-ti/message/17658 Mute This Topic: https://lists.yoctoproject.org/mt/106102335/21656 Group Owner: meta-ti+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-