Signed-off-by: Koen Kooi <[email protected]> --- Please test this patch on your am335x boards, I need to run out and buy a mini usb cable because I misplaced mine during traveling this week.
Untested, but I wanted to get it out before the weekend. .../0011-ext2load-increase-read-speed.patch | 74 ++++++++++++++++++++ recipes-bsp/u-boot/u-boot_2011.10rc.bb | 3 +- 2 files changed, 76 insertions(+), 1 deletions(-) create mode 100644 recipes-bsp/u-boot/u-boot/2011.09git/0011-ext2load-increase-read-speed.patch diff --git a/recipes-bsp/u-boot/u-boot/2011.09git/0011-ext2load-increase-read-speed.patch b/recipes-bsp/u-boot/u-boot/2011.09git/0011-ext2load-increase-read-speed.patch new file mode 100644 index 0000000..7d4ce87 --- /dev/null +++ b/recipes-bsp/u-boot/u-boot/2011.09git/0011-ext2load-increase-read-speed.patch @@ -0,0 +1,74 @@ +From 5d6d85e090e6ff57972e7cc9d38fa0c62be08031 Mon Sep 17 00:00:00 2001 +From: [email protected] <[email protected]> +Date: Wed, 28 Mar 2012 04:37:11 +0000 +Subject: [PATCH 11/11] ext2load: increase read speed + +This patch dramatically drops the amount of time u-boot needs to read a +file from an ext2 partition. On a typical 2 to 5 MB file (kernels and +initrds) it goes from tens of seconds to a couple seconds. + +All we are doing here is grouping contiguous blocks into one read. + +Boot tested on Globalscale Technologies Dreamplug (Kirkwood ARM SoC) +with three different files. sha1sums were calculated in Linux +userspace, and then confirmed after ext2load. + +Signed-off-by: Jason Cooper <[email protected]> +--- + fs/ext2/ext2fs.c | 26 ++++++++++++++++++++++++-- + 1 files changed, 24 insertions(+), 2 deletions(-) + +diff --git a/fs/ext2/ext2fs.c b/fs/ext2/ext2fs.c +index e119e13..8531db5 100644 +--- a/fs/ext2/ext2fs.c ++++ b/fs/ext2/ext2fs.c +@@ -414,7 +414,6 @@ int ext2fs_read_file + if (blknr < 0) { + return (-1); + } +- blknr = blknr << log2blocksize; + + /* Last block. */ + if (i == blockcnt - 1) { +@@ -432,6 +431,29 @@ int ext2fs_read_file + blockend -= skipfirst; + } + ++ /* grab middle blocks in one go */ ++ if (i != pos / blocksize && i != blockcnt - 1 && blockcnt > 3) { ++ int oldblk = blknr; ++ int blocknxt; ++ while (i < blockcnt - 1) { ++ blocknxt = ext2fs_read_block(node, i + 1); ++ if (blocknxt == (oldblk + 1)) { ++ oldblk = blocknxt; ++ i++; ++ } else { ++ blocknxt = ext2fs_read_block(node, i); ++ break; ++ } ++ } ++ ++ if (oldblk == blknr) ++ blockend = blocksize; ++ else ++ blockend = (1 + blocknxt - blknr) * blocksize; ++ } ++ ++ blknr = blknr << log2blocksize; ++ + /* If the block number is 0 this block is not stored on disk but + is zero filled instead. */ + if (blknr) { +@@ -444,7 +466,7 @@ int ext2fs_read_file + } else { + memset (buf, 0, blocksize - skipfirst); + } +- buf += blocksize - skipfirst; ++ buf += blockend - skipfirst; + } + return (len); + } +-- +1.7.2.5 + diff --git a/recipes-bsp/u-boot/u-boot_2011.10rc.bb b/recipes-bsp/u-boot/u-boot_2011.10rc.bb index 0102d15..8f2c137 100644 --- a/recipes-bsp/u-boot/u-boot_2011.10rc.bb +++ b/recipes-bsp/u-boot/u-boot_2011.10rc.bb @@ -6,7 +6,7 @@ COMPATIBLE_MACHINE = "(ti33x)" DEFAULT_PREFERENCE_ti33x = "99" PV = "2011.09+git" -PR = "r26" +PR = "r27" # SPL build UBOOT_BINARY = "u-boot.img" @@ -24,6 +24,7 @@ SRC_URI = "git://arago-project.org/git/projects/u-boot-am33x.git;protocol=git;br file://2011.09git/0008-HACK-am335x-evm-turn-d-cache-on-globally-turn-it-off.patch \ file://2011.09git/0009-am335x-evm-enable-i2c2-pinmux-for-beaglebone.patch \ file://2011.09git/0001-ddr_defs-change-DDR-timings-for-15x15-EVM.patch \ + file://2011.09git/0011-ext2load-increase-read-speed.patch \ " SRCREV = "f63b270e47f62f4d1a05b2001357e215966c6f5a" -- 1.7.2.5 _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
