Hi Enrico,
I'm not sure what are you reffering to when you say bootloader env, but
here's what I get on my console:
U-Boot SPL 2011.12-dirty (Sep 24 2012 - 17:18:42)
Texas Instruments OMAP4430 ES2.3
Bypassing DPLL failed 4a008180
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2011.12-dirty (Sep 24 2012 - 17:18:42)
CPU : OMAP4430 ES2.3
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0
Using default environment
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
reading boot.scr
** Unable to read "boot.scr" from mmc 0:1 **
reading uImage
4176612 bytes read
Booting from mmc0 ...
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-3.1.0
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4176548 Bytes = 4 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
All I did to build it, was to add meta-ti to my bblayers.conf and try
bitbake with MACHINE=pandaboard. The build was screaming about some QA
errors, which I had to disable to get the build finish. I'm assuming
those are the reason for my failure. However, I did not investigate
further into these.
Thanks,
Radu
On 09/26/2012 12:20 PM, Enrico wrote:
On Wed, Sep 26, 2012 at 10:02 AM, Radu Moisan <[email protected]> wrote:
Hi guys,
Can anyone tell me if pandaboard is working with master branch of poky? I
just don't want to waste my time figuring out what I've done wrong, if the
build is not working anyway.
It's a long time since i tried it but it was working, can you post
your bootloader env? Maybe you are just missing the console=ttyO2...
part.
Enrico
_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti
