From: Franklin S. Cooper Jr <[email protected]> * When testing on am37x-evm I noticed that no prompt to login was ever shown when connected via serial port. * I finally noticed that the SERIAL_CONSOLE variable was set incorrectly and didn't match the value in the old Arago layer. * After using the values specific in the machine file in the Arago layer I was able to login via serial port. * This has been verified on both the am37x-evm and am3517-evm.
Signed-off-by: Franklin S. Cooper Jr <[email protected]> --- conf/machine/am3517-evm.conf | 2 +- conf/machine/am37x-evm.conf | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/conf/machine/am3517-evm.conf b/conf/machine/am3517-evm.conf index e817069..536d337 100644 --- a/conf/machine/am3517-evm.conf +++ b/conf/machine/am3517-evm.conf @@ -19,7 +19,7 @@ require conf/machine/include/omap3.inc IMAGE_FSTYPES += "ubi tar.gz" EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048" -SERIAL_CONSOLE = "115200 ttyS2" +SERIAL_CONSOLE = "115200 ttyO2" USE_VT = "2" PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp" diff --git a/conf/machine/am37x-evm.conf b/conf/machine/am37x-evm.conf index 9a1acb4..866abc5 100644 --- a/conf/machine/am37x-evm.conf +++ b/conf/machine/am37x-evm.conf @@ -19,7 +19,7 @@ require conf/machine/include/omap3.inc IMAGE_FSTYPES += "ubi tar.gz" EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048" -SERIAL_CONSOLE = "115200 ttyS0" +SERIAL_CONSOLE = "115200 ttyO0" PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp" -- 1.7.0.4 _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
