On my way to install 2.6.32 kernel for the Beagle board image. I need this kernel to work with the leopard imaging/aptina camera module/sensors. I'm encountering this "oe_runmake failed" issue. I have strong feeling it is Yocto or the meta-ti layers, which is not set properly. On the web i got related issues, but they are too old, and were related to OE.
I'm using danny branch. I had downloaded meta-ti, openembedded-core, and meta-oe as .zip files meant for danny branch. Thanks to Denys D@ti for help. I integrated meta-ti with yocto, and also built the image with the default 3.2 kernel, and further with 2.6.37 kernel too, successfully. I have also included partial terminal output below.! These are a few lines from /home/asahota/danny-try/danny-8.0/meta-ti/conf/machine/beagleboard.conf *******START #@TYPE: Machine #@NAME: Beagleboard machine #@DESCRIPTION: Machine configuration for the http://beagleboard.org/ board require conf/machine/include/omap3.inc # Only has DVI connector for external screen GUI_MACHINE_CLASS = "bigscreen" #PREFERRED_PROVIDER_virtual/kernel = "linux-mainline" PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp" <---- change PREFERRED_VERSION_linux-omap-psp = "2.6.32" PREFERRED_PROVIDER_virtual/bootloader = "u-boot-beagleboard" PREFERRED_PROVIDER_u-boot = "u-boot-beagleboard" IMAGE_FSTYPES += "tar.gz ubi" EXTRA_IMAGECMD_jffs2 = "-lnp" SERIAL_CONSOLE = "115200 ttyO2" UBOOT_MACHINE = "omap3_beagle_config" *******END These are the FIRST few lines of my terminal output, for the command bitbake core-image-sato *******START WARNING: Host distribution "Ubuntu 12.04.2 LTS" has not been validated with this version of the build system; you may possibly experience unexpected failures. It is recommended that you use a tested distribution. Loading cache: 100% |###################################################################################################################################| ETA: 00:00:00 Loaded 1210 entries from dependency cache. Build Configuration: BB_VERSION = "1.16.0" TARGET_ARCH = "arm" TARGET_OS = "linux-gnueabi" MACHINE = "beagleboard" DISTRO = "poky" DISTRO_VERSION = "1.3" TUNE_FEATURES = "armv7a vfp neon cortexa8" TARGET_FPU = "vfp-neon" meta meta-yocto meta-ti meta-yocto-bsp = "<unknown>:<unknown>" NOTE: Resolving any missing task queue dependencies NOTE: Preparing runqueue NOTE: Executing SetScene Tasks *******END These are the LAST few lines of my terminal output, for the command bitbake -vvv core-image-sato *******START | include/linux/pagemap.h: In function 'fault_in_pages_readable': | include/linux/pagemap.h:413:16: warning: variable 'c' set but not used [-Wunused-but-set-variable] | LD fs/ubifs/ubifs.o | LD fs/ubifs/built-in.o | LD fs/built-in.o | ERROR: oe_runmake failed | ERROR: Function failed: do_compileconfigs (see /home/asahota/danny-try/danny-8.0/build/tmp/work/beagleboard-poky-linux-gnueabi/linux-omap-psp-2.6.32-r0/temp/log.do_compileconfigs.28440 for further information) ERROR: Task 805 (/home/asahota/danny-try/danny-8.0/meta-ti/recipes-kernel/linux/ linux-omap-psp_2.6.32.bb, do_compileconfigs) failed with exit code '1' NOTE: Tasks Summary: Attempted 5104 tasks of which 5097 didn't need to be rerun and 1 failed. No currently running tasks (5104 of 5135) Summary: 1 task failed: /home/asahota/danny-try/danny-8.0/meta-ti/recipes-kernel/linux/ linux-omap-psp_2.6.32.bb, do_compileconfigs Summary: There was 1 WARNING message shown. Summary: There was 1 ERROR message shown, returning a non-zero exit code. *****END I spent a lot of time tracing the error in the YP folders and files. It was somewhere near kernel_do_configure. But I couldn't get where "oe_runmake" is. Couldn't continue debugging. --------------------------------- Sudhangathan BS Ph:(+91) 9731-905-205 ---------------------------------
_______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
