Hello, I am trying to integrate meta-ti layer into the current yocto project. I wish to build the image for pandaboard.
I am adding another layer called meta-ivi in the yocto kernel which provided functionality for in-vehicle infotainment systems. In the meta-ivi layer, there is a recipe "foton-image", which builds GENIVI compliant baseline image. Also, few recipes were masked to resolve the license issue. So, setting all the variables in the conf/local.conf and conf/bblayers.conf file, I build the image as follows. รจ bitbake foton-image I ended up with following error, which indicates that there's a failure in fetching the repository. Here is the output log for your reference: prathamesh@mintos ~/workdir/poky-dylan-9.0.1/build $ bitbake foton-image Loading cache: 100% |###################################################################################################################################| ETA: 00:00:00 Loaded 1220 entries from dependency cache. Build Configuration: BB_VERSION = "1.18.0" BUILD_SYS = "i686-linux" NATIVELSBSTRING = "LinuxMint-14" TARGET_SYS = "arm-oe-linux-gnueabi" MACHINE = "pandaboard" DISTRO = "poky-ivi-systemd" DISTRO_VERSION = "4.0.2" TUNE_FEATURES = "armv7a vfp neon" TARGET_FPU = "vfp-neon" meta meta-yocto meta-yocto-bsp meta-ivi-4.0.2 = "<unknown>:<unknown>" meta-ti = "master:c14c386946e1ea341faeea292580e37d538d645d" NOTE: Resolving any missing task queue dependencies NOTE: multiple providers are available for u-boot (u-boot, u-boot-ti-staging) NOTE: consider defining a PREFERRED_PROVIDER entry to match u-boot NOTE: Preparing runqueue NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks WARNING: Failed to fetch URL git://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487<http://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487>, attempting MIRRORS if available ERROR: Fetcher failure: Fetch command failed with exit code 128, output: Cloning into bare repository '/home/prathamesh/workdir/poky-dylan-9.0.1/build/downloads/git2/dev.omapzoom.org.pub.scm.integration.kernel-ubuntu.git'... fatal: The remote end hung up unexpectedly fatal: early EOF fatal: index-pack failed ERROR: Function failed: Fetcher failure for URL: 'git://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487<http://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487>'. Unable to fetch URL from any source. ERROR: Logfile of failure stored in: /home/prathamesh/workdir/poky-dylan-9.0.1/build/tmp-eglibc-eglibc/work/pandaboard-oe-linux-gnueabi/linux-omap4/3.4-r0/temp/log.do_fetch.4257 ERROR: Task 910 (/home/prathamesh/workdir/meta-ti/recipes-kernel/linux/linux-omap4_3.4.bb<http://linux-omap4_3.4.bb>, do_fetch) failed with exit code '1' NOTE: Tasks Summary: Attempted 2323 tasks of which 2231 didn't need to be rerun and 1 failed. Waiting for 0 running tasks to finish: Summary: 1 task failed: /home/prathamesh/workdir/meta-ti/recipes-kernel/linux/linux-omap4_3.4.bb<http://linux-omap4_3.4.bb>, do_fetch Summary: There was 1 WARNING message shown. Summary: There were 2 ERROR messages shown, returning a non-zero exit code. Note: 1. I have successfully built the foton-image for target vexpressa9, and it boots without any errors in the qemu emulator. 2. I am able to 'git clone' the above mentioned repository. If you could let me know how can I use the local repository for build process. I tried copying the repository in downloads folder, but it did not work somehow. Plz help me out with this issue..! Thanks in advance for your reply..:) Thanks and Regards, Prathamesh Ghanekar Senior Software Engineer,P&ES [Description: Description: cid:[email protected]] ............................................................................................................ Unit 20, SDF-7, SEEPZ SEZ, Andheri(East),Mumbai-400096 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Disclaimer~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Information contained and transmitted by this e-mail is confidential and proprietary to iGATE and its affiliates and is intended for use only by the recipient. If you are not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this e-mail is strictly prohibited and you are requested to delete this e-mail immediately and notify the originator or [email protected] <mailto:[email protected]>. iGATE does not enter into any agreement with any party by e-mail. Any views expressed by an individual do not necessarily reflect the view of iGATE. iGATE is not responsible for the consequences of any actions taken on the basis of information provided, through this email. The contents of an attachment to this e-mail may contain software viruses, which could damage your own computer system. While iGATE has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening an attachment. To know more about iGATE please visit www.igate.com <http://www.igate.com>. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<<inline: image001.jpg>>
_______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
